All jobs within 300 km around Paris in Engineering

Responsibilities

• Provide a means of communication directly with the customer in order to develop and supply a component which meets or exceeds the customer requirements.
• Root cause analysis and implementation of corrective action for process related concerns.
• Assist Quality Manager in establishing, implementing, and maintain the quality management system.
• Responsible for continual improvement activities to enhance the quality system, such as 5S, kaizen lean methods, etc.
• Interface with Engineering and operations to ensure transfer to Production of new products are in accordance with approved data.
• Support the Quality Inspectors to ensure that products and processes comply with the relevant requirements of the quality management system.
• Conduct audits, including closing out audit findings, creating audits finding reports, and determine proper corrective and preventive actions.
• Analyze failure, corrective, and preventive actions to respond to customer complaints.
• Create and maintain company quality documentation, such as quality manuals, quality procedures, etc.
• Responsible for planning, organizing, and managing the overall activities of receiving/outgoing quality functions.
• Continuously improving QA receiving inspection processes and procedures.
• Ensure timely resolution of supplier failure, corrective actions and preventive measure.
• Manger suppliers’ performance and conduct audits.
• Preparation of reports for Quality Assurance.

Qualifications

• A bachelor's degree in engineering, manufacturing, quality or other related discipline is required.
• Three to five years of related experience with experience in quality assurance functions.
• Ability to write quality assurance reports that describe manufacturing problems, corrective actions taken, and preventative measures needed. Proposals are usually written for non-technical audiences such as clients and management.
• Ability to make presentations to management during meetings to provide an overview of areas such as product costing, customer requirements, and product failures which need to be considered when planning for coming year.
• Ability to assess suitability of candidates for specific positions. Review resumes comparing applicants’ experience and training to requirements of position. Evaluate applicants’ responses in job application interviews and interpret information provided by employment and personal references.
• Experience with APQP: Process Control Plans, PFMEA, Gauge Planning, and all levels of PPAP requirements. Read operating and quality reports to understand technical and operational information about facilities, processes and equipment.
• Experience in drawing interpretations and geometric dimensional tolerancing. Knowledge and experience in gauging methods, gauge selection, calibration, and gauge R and R’s. Ability to take precise measurements using specialized equipment and techniques.
• Demonstrated ability to lead and co-ordinate project teams which include other engineers, production, customers, and suppliers when designing, developing and building products or processes.
• Proficient with MS Office and CAD applications. Familiar with ISO/TS16949 quality standards. Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining.
• Attend formal professional development seminars and conferences as needed. Conduct self directed studies by reading journals and trade publications. Must be aware of new technologies and advances in the engineering field. 

Senior Process Engineer

We are currently searching for a Senior Process Engineer where you will be responsible for supporting the manufacturing facility in the design, fabrication, modification and evaluation of manufacturing operations.  Operations will include CNC machining (milling and lathe), metal forming/flow forming, laser and CD welding/brazing, heat treat, assembly and material handling. You will also act as a technical resource for troubleshooting manufacturing and quality issues. This role will play an integral part in several upcoming high profile production launches.

Key Accountabilities

·    Work with production planning to set shop priorities and ensure all required tools and documentation required in the plant for production run jobs are available.

·    Attend Advance Quality Planning meetings to finalize design of required fixtures and tooling.

·    Interface with suppliers of raw material and tools to establish engineering requirements for start of production.

·    Investigate and find resolution of specific processing problems for assigned projects/parts.

·    Prepare quotations for new jobs, including material and processing costs, tooling, gauges and capital investment costs if required.

·    Participate in productivity improvement investigations.

·    Conduct time studies.

·    Maintain ongoing process control through quality troubleshooting and process improvement investigation.

·    Regular review of all processes and operator instructions for assigned customers to ensure accuracy and conformance.

Minimum Requirements

·    A university degree in engineering or equivalent.

·    Three to five years of related experience preferably in a high volume CNC manufacturing environment.

·    Ability to collect data and develop statistics to describe equipment and system functionality.

·    Estimate durations of development, fabrication, construction and repair tasks.

·    Ability to determine which materials and equipment to use.

·    Ability to also determine which measuring tools and methods to use.

·    Ability to complete work order and change work order forms to notify key parties about projects.

·    Previous experience in machine processes, cutting tools, fixtures, CNC and Special purpose machines.

·    Experience with mechanical blueprint interpretation including GD&T. Must be able to demonstrate basic drawing and dimensioning during interview process.

·    Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining (i.e. AutoCAD (2D/3D), CAD/CAM and SolidWorks).

·    Project Management experience an asset

·    Good computer skills, including Word, Excel and Outlook.

Desired Characteristics

·     A positive, high-energy individual who can work in a fast paced environment with changing deadlines

·     Strong oral and written communication skills

·     Ability to coordinate and integrate work within teams of engineers and technicians.

·     Able to work independently and in a team setting.

Why Linamar

·     Opportunities for career advancement

·     Assistance with approved professional designations and fees

·     Community based outreach supporting both local and global initiatives and charities

·     Social committees and sports teams

·     Discounts for local vendors and events, including auto supplier discounts

The Engineer - Process position will be responsible for determining the operations for fabrication and assembly of products by reviewing parts drawings, specifications, and other engineering data. Primarily accountable for planning, scheduling, conducting, or coordinating phases of major engineering projects in addition to developing sequence of operations, estimate time requirements for each, and prepare operation sheets.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

• Work with production planning to set shop priorities and ensure all necessary tools and documentation needed in the plant are available.
• Attend Advance Quality Planning meetings to finalize design of required fixtures and tooling.
• Interface with suppliers of raw material and tools to establish engineering requirements for start of production.
• Investigate and find resolution of specific processing problems for assigned projects and parts.
• Prepare quotations for new jobs, including material and processing costs, tooling, gauges and capital investment costs if required.
• Participate in productivity improvement investigations.
• Conduct time studies.
• Maintain ongoing process control through quality troubleshooting and process improvement investigation.
• Regular review of all processes and operator instructions for assigned customers to ensure accuracy and conformance to actual procedures.
• Collect data and develop statistics to describe equipment and system functionality.
• Estimate durations of development, fabrication, construction and repair tasks.
• Define which materials and equipment to use for projects and select appropriate codes.
• Complete work order and change work order forms to notify key parties about projects.
• Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Credentials

• Post-Secondary education in Engineering or Equivalent.
• Minimum three years of related experience.
• Knowledge/work experience in machine processes, cutting tools, fixtures, CNC and Special purpose machines.
• Working knowledge of ISO-TS16949 and ISO 14001, and with mechanical blueprint interpretation including GD and T.
• Good computer skills, including Word, Excel and Outlook.
• Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining (i.e. AutoCAD, CAD/CAM and SolidWorks).

Desired Characteristics

• Able to interact with supervisors or managers and integrate work within teams of engineers and technicians to work on common projects.
• Attend formal professional development seminars and conferences as needed.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

Responsible to perform PSAs (Potential Supplier Audits), responsible to close out PSA audit short falls.  Responsible to manage the APQP process to support program launches.  Responsible to develop and continually improve our Engineering Feasibility documents to include lessons learned by commodity/component.  Support supply crisis situations related to capacity and quality.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·       Ensure compliance with all legislative requirements in the facility’s geographic location and:

o   The Global Operating System Plays;

o   OHSAS 18001:2007 Health and Safety Management system standard;

o   ISO 14001:2004 Environmental Management System standard;

o   IATF/TS16949 Technical Specification Management and Linamar Quality Basics System standards.

·       Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.

·       Maintain balance between customer, employee, and financial satisfaction by maximizing facility/department Performance Indicators (Linamar Supplier Scorecard System).

·       Supply Management including APQP, Launch, PSA’s and crisis management.

·       Maintain effective communication with internal and external customers to ensure program requirements are met.

·       Interpret regulatory quality documents in order to apply them to manufacturing and quality systems.

·       Be actively involved in quality planning of the supply base (Control Plans, APQP, FMEA, PPAP, MSA).

·       Identify gauging methods required for the supplier to ensure quality requirements are met.

·       Participate & lead in APQP meetings.

·       Initiate and participate in 8D Problem solving meetings with suppliers.

·       Review accuracy of process documentation and update as required.

·       Supplier development activities (Prototype running, pre-production process analysis, run at rate on site, early containment evaluation, process production release).

·       Part Readiness follow up and support.

·       Safe launch assurance and/or red launch follow up and solution.

·       Follow up on lessons learned matrix and read across, ensure added to engineering feasibilities by commodity/component.

·       Willingness to travel as needed.

Credentials

·       A bachelor’s degree in engineering or related engineering discipline is required.

Desired Characteristics

·       Five to seven years of related experience.

·       Experience with risk analysis and problem failure modes and effects analysis (FMEA) for automotive products.

·       Experience in writing and executing engineering test protocols.  Write quality assurance reports that describe manufacturing problems, corrective actions taken, and preventative measures needed.  Proposals are usually written for non-technical audiences such as clients and management.

·       Ability to make presentations to senior management during annual meetings to provide an overview of areas such as product costing, maintenance and equipment failures which need to be considered when planning for the coming year.

·       Read operating and quality assurance reports to understand technical and operational information about facilities, processes, and equipment.

·       Experience in drawing interpretations and geometric dimensional tolerancing.  Knowledge and experience in gauging methods, calibration, and gauge R&R’s.  Ability to take precise measurements using specialized equipment and techniques.

·       Lead and co-ordinate project teams which include other engineers, technologists, clients, and contractors when designing, developing, and building products or facilities.

·       Proficient with MS Office and CAD applications. Familiar with material processes and IATF/TS16949 standards.  Experience with the use of statistical analysis software and computer-assisted design, manufacturing, and machining.

·       Attend formal professional development seminars and conferences as needed.  Conduct self-directed studies by reading journals and trade publications.  Must be aware of new technologies and advances in the engineering field.

What Linamar Has To Offer

·       Opportunities for career advancement.

·       Community based outreach supporting both local and global initiatives and charities.

·       Social committees and sports teams.

·       Discounts for local vendors and events, including auto supplier discounts.

The Engineer - Process position will be responsible for determining the operations for fabrication and assembly of products by reviewing parts drawings, specifications, and other engineering data. Primarily accountable for planning, scheduling, conducting, or coordinating phases of major engineering projects in addition to developing sequence of operations, estimate time requirements for each, and prepare operation sheets.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

• Work with production planning to set shop priorities and ensure all necessary tools and documentation needed in the plant are available.
• Attend Advance Quality Planning meetings to finalize design of required fixtures and tooling.
• Interface with suppliers of raw material and tools to establish engineering requirements for start of production.
• Investigate and find resolution of specific processing problems for assigned projects and parts.
• Prepare quotations for new jobs, including material and processing costs, tooling, gauges and capital investment costs if required.
• Participate in productivity improvement investigations.
• Conduct time studies.
• Maintain ongoing process control through quality troubleshooting and process improvement investigation.
• Regular review of all processes and operator instructions for assigned customers to ensure accuracy and conformance to actual procedures.
• Collect data and develop statistics to describe equipment and system functionality.
• Estimate durations of development, fabrication, construction and repair tasks.
• Define which materials and equipment to use for projects and select appropriate codes.
• Complete work order and change work order forms to notify key parties about projects.
• Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Credentials

• Post-Secondary education in Engineering or Equivalent.
• Minimum three years of related experience.
• Knowledge/work experience in machine processes, cutting tools, fixtures, CNC and Special purpose machines.
• Working knowledge of ISO-TS16949 and ISO 14001, and with mechanical blueprint interpretation including GD and T.
• Good computer skills, including Word, Excel and Outlook.
• Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining (i.e. AutoCAD, CAD/CAM and SolidWorks).

Desired Characteristics

• Able to interact with supervisors or managers and integrate work within teams of engineers and technicians to work on common projects.
• Attend formal professional development seminars and conferences as needed.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

Conduct studies and develop and supervise programs to achieve the best use of equipment, human resources, technology, materials and procedures to enhance efficiency and productivity. Provide support in the design, fabrication, modification and evaluation of manufacturing operations such as machining, metal forming, welding/brazing, assembly and material handling. May develop sequence of operations, estimate time requirements for each, and prepare operation sheets.  Act as a resource to assist and troubleshoot manufacturing and quality issues. May assign work to drafters and technicians, technical writers, engineering technicians, and machine operators as required.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·        Ensure compliance with all legislative requirements in the facility’s geographic location and:

·        The Global Operating System Plays;

·        OHSAS 18001: Health and Safety management system standard;

·        ISO 14001: Environmental Management system standard;

·        TS 16949 Technical Specification Management and Linamar Quality Basics system standards.

Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.

Maintain balance between customer, employee and financial satisfaction by maximizing facility/department Performance Indicators to align to Linamar’s Stepping Stool of Success Strategy.

Support and maintain department lean initiatives as set out in LPS system requirements.

·        Maintain department 5S requirements.

Work with production planning to set shop priorities and ensure all required tools and documentation required in the plant for production run jobs are available.

Investigate and monitor new machinery and equipment and recommend or select efficient combinations.

Conduct time studies to optimize cycle counts of existing processes.

Assist in defining the plant lay-out and enhance ergonomic requirements by establishing programs and conducting studies. 

Planning and executing of projects related to new and pre-existing production lines, improvements, upgrades, layouts and new equipment related to machining or assembly.

Attend Advanced Product Quality Planning (APQP).

Recognize and resolve tooling related difficulties with existing and new projects while working with the manufacturing support staff.

Interface with suppliers of raw material and tools to establish engineering requirements for start of production.

Investigate and find resolution of specific processing problems for assigned projects/parts.

Conduct studies of the reliability and performance of plant facilities and production or administrative systems.

Develop and review all processes and operator instructions to ensure accuracy and conformance to actual procedures, revise as needed.

Participate in corrective action to meet ongoing cost, quality and delivery.

Lead development of process flows, process sheets, FMEA’s, and control plans.

Ensure the process is capable of producing parts to print specifications.

Recognize and resolve process related difficulties with current and future projects.

Participate in Customer Focus meetings.

Assist in the preparation of quotations

Assist in training shop floor personnel in machine set-up, equipment operation and best practices.

Adhere to TS16949 and applicable customer standards.

Credentials

·        A university degree or diploma in engineering or equivalent.

·        Licensing by a provincial or territorial association of Professional Engineers (P.Eng.) would be an asset.

Desired Characteristics

The ideal candidate will exhibit the following characteristics.

A minimum of five years of experience in a machining or manufacturing environment.

Knowledge/ work experience with machine processes, cutting tools, fixtures, CNC and special purpose equipment.

Ability to write comprehensive entries into technical log books which are then used as reference documents.

Discuss daily production with plant operators and maintenance staff.

Ability to evaluate the ability of current building systems to address increased demands from plant operations.

Experience with risk analysis and failure modes and effects analysis (FMEA).

Review scale drawings to ensure the proposed designs satisfy the clients' requirements and comply with manufacturing capabilities.

Ability to take precise measurements using specialized equipment and techniques.

Collect data and develop statistics to describe equipment and system functionality. Estimate durations of development, fabrication, construction and repair tasks.

Determine which materials and equipment to use for projects and decide the appropriate codes and standards to apply when completing these projects.

Contact suppliers to verify product availability, obtain equipment specifications and negotiate timely deliveries. Interact with others such as supervisors or managers for advice and direction, to discuss work and provide updates.

Coordinate and integrate work within teams of engineers and technicians to work on common projects. Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Interact with technicians or technologists for tasks such as creating scale drawings, preparing specifications, writing proposals and developing plant maintenance schedules.

Proficient with Microsoft Office and CAD applications. Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining i.e. Microsoft Office including Project, AutoCAD, SolidWorks).

What Linamar Has to Offer

·        Opportunities for career advancement.

·        Community based outreach supporting both local and global initiatives and charities.

·        Social committees and sports teams.

·        Discounts for local vendors and events, including auto supplier discounts.

Responsible to perform PSAs (Potential Supplier Audits), responsible to close out PSA audit short falls.  Responsible to manage the APQP process to support program launches.  Responsible to develop and continually improve our Engineering Feasibility documents to include lessons learned by commodity/component.  Support supply crisis situations related to capacity and quality.  Responsible to develop and improve our current suppliers.

This is an in-office position.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

• Ensure compliance with all legislative requirements in the facility’s geographic location and:
• The Global Operating System Plays;
• OHSAS 18001:2007 Health and Safety Management system standard;
• ISO 14001:2004 Environmental Management System standard;
• IATF/TS16949 Technical Specification Management and Linamar Quality Basics System standards.
• Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.
• Maintain balance between customer, employee, and financial satisfaction by maximizing facility/department Performance Indicators (Linamar Supplier Scorecard System).
• Supply Management including APQP, Launch, PSA’s and crisis management.
• Maintain effective communication with internal and external customers to ensure program requirements are met.
• Interpret regulatory quality documents in order to apply them to manufacturing and quality systems.
• Be actively involved in quality planning of the supply base (Control Plans, APQP, FMEA, PPAP, MSA).
• Identify gauging methods required for the supplier to ensure quality requirements are met.
• Participate & lead in APQP meetings.
• Initiate and participate in 8D Problem solving meetings with suppliers.
• Review accuracy of process documentation and update as required.
• Supplier development activities (Prototype running, pre-production process analysis, run at rate on site, early containment evaluation, process production release).
• Part Readiness follow up and support.
• Safe launch assurance and/or red launch follow up and solution.
• Follow up on lessons learned matrix and read across, ensure added to engineering feasibilities by commodity/component.
• Willingness to travel as needed, including internationally.

Credentials

• A bachelor’s degree in engineering or related engineering discipline is required.

Desired Characteristics

• Five to seven years of related experience.
• Experience with risk analysis and problem failure modes and effects analysis (FMEA) for automotive products.
• Experience in writing and executing engineering test protocols.  Write quality assurance reports that describe manufacturing problems, corrective actions taken, and preventative measures needed.  Proposals are usually written for non-technical audiences such as clients and management.
• Ability to make presentations to senior management during annual meetings to provide an overview of areas such as product costing, maintenance and equipment failures which need to be considered when planning for the coming year.
• Read operating and quality assurance reports to understand technical and operational information about facilities, processes, and equipment.
• Experience in drawing interpretations and geometric dimensional tolerancing.  Knowledge and experience in gauging methods, calibration, and gauge R&R’s.  Ability to take precise measurements using specialized equipment and techniques.
• Lead and co-ordinate project teams which include other engineers, technologists, clients, and contractors when designing, developing, and building products or facilities.
• Proficient with MS Office and CAD applications. Familiar with material processes and IATF/TS16949 standards.  Experience with the use of statistical analysis software and computer-assisted design, manufacturing, and machining.
• Attend formal professional development seminars and conferences as needed.  Conduct self-directed studies by reading journals and trade publications.  Must be aware of new technologies and advances in the engineering field.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

The Data Engineer, Intermediate position will be involved in designing, developing, and maintaining data pipelines and ensuring data quality and integrity across various systems.

Responsibility

• Design, develop, and maintain data pipelines using data factory.
• Manage and optimize SQL data warehouse solutions.
• Implement and maintain master data services to ensure data consistency and quality.
• Collaborate with cross-functional teams to understand data requirements and deliver solutions.
• Develop and maintain Power BI reports and dashboards (preferred).
• Ensure data security and compliance with company policies and industry standards.
• Troubleshoot and resolve data-related issues.

Academic/Educational Requirements

• A degree in computer science, Information Technology, or a related field, or equivalent work experience.

The Quality Engineer, Senior position, under general direction, is responsible for performing complex inspections and set quality standards for both in-process and finished products and materials. Primarily accountable for working with quality inspection supervisors to train and oversee inspectors in their use of control forms, procedures, and correcting quality problems. In addition, develop methods for testing, sampling and training and evaluating production making recommending improvements. This position may provide technical leadership and assist in training less skilled engineers.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Maintain effective communication with internal and external customers to ensure all quality requirements are met.

· Interpret regulatory quality documents in order to apply them to manufacturing and quality systems.

· Be actively involved in quality planning (Control Plans, APQP, FMEA, PPAP, Gauging).

· Identify gauging methods, quote, purchase and implement related systems.

· Participate in Customer Focus meetings.

· Initiate and participate in 8D Problem solving meetings with customers, suppliers or internal.

· Review accuracy of process documentation and update as needed.

· Write quality assurance reports describing manufacturing problems, corrective actions taken and preventative measures needed.

· Ability to make presentations to senior management during annual meetings.

· Assess suitability of candidates for specific positions.

· Read operating and quality assurance reports to understand technical and operational information about facilities, processes and equipment.

· Direct and coordinate project teams which include other engineers, technologists, clients and contractors when designing, developing and building products or facilities.

· Attend formal professional development seminars and conferences as needed.

Credentials

· Post-Secondary education in Engineering or related engineering discipline.

· Minimum five years of related previous experience.

· Experience with risk analysis and problem failure modes and effects analysis (FMEA) for automotive products.

· Familiarity in writing and executing engineering test protocols.

· Experience in drawing interpretations and geometric dimensional tolerancing.

· Working knowledge in gauging methods, calibration, and gauge R and R’s.

· Ability to take precise measurements using specialized equipment and techniques.

· Proficient with MS Office and CAD applications.

· Familiar with material processes and TS16949 standards.

· Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

As Manufacturing Engineer - Assembly at PowerCor Manufacturing, you will play a key role in optimizing our manufacturing processes to enhance safety, quality and efficiency.  You will work closely with cross-functional teams to identify areas for improvement, develops innovative solutions, and implement process enhancements that drive operational excellence.  This position will primarily be on the shop floor working hands-on on the equipment.

Responsibilities

• Work directly on the shop floor to troubleshoot issues, implement changes and execute process improvements
• Address and resolve manufacturing issues in real-time, including equipment malfunctions, process deviations, and quality concerns
• Implement process improvements to enhance productivity, reduce waste/rejects, and minimize downtime/cycle time
• Utilize data analysis techniques to identify trends, troubleshoot issues and make data driven decisions to optimize manufacturing processes
• Lead root cause analysis investigations to address process deviations, quality issues and equipment failures
• Create and maintain detailed process documentation, including Standard Operating Procedures (SOPs), work instructions, and process flow diagrams
• Provide technical support and training to production personnel to ensure proper execution of manufacturing processes
• Knowledge of Pneumatics/Hydraulics, Assembly Concepts/Tooling/Fixturing 
• Work closely with cross-functional teams, including production, maintenance, and quality to ensure seamless integration of process improvements

Qualifications

• A post-secondary Engineering degree, diploma or equivalent
• 1-3 years of hands-on experience as a Manufacturing Engineer in an automated assembly environment
• Strong understanding of manufacturing processes, equipment, and tools
• Ability to read and interpret technical manuals and drawings
• Excellent troubleshooting skills with a proactive approach to addressing and resolving manufacturing challenges
• Strong communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams.
• Machine design mentality, SolidWorks proficiency and GD&T knowledge are assets.
• Ability to work effectively in a fast-paced environment and adapt to changing priorities and challenges
• Ability to work overtime and weekends as needed

What Linamar Has to Offer

• Opportunities for career advancement
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts.

The Engineer - Process position will be responsible for determining the operations for fabrication and assembly of products by reviewing parts drawings, specifications, and other engineering data. Primarily accountable for planning, scheduling, conducting, or coordinating phases of major engineering projects in addition to developing sequence of operations, estimate time requirements for each, and prepare operation sheets.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

 400 Massey Road, Guelph, Ontario, N1K 1C4, CA

• Work with production planning to set shop priorities and ensure all necessary tools and documentation needed in the plant are available.
• Attend Advance Quality Planning meetings to finalize design of required fixtures and tooling.
• Interface with suppliers of raw material and tools to establish engineering requirements for start of production.
• Investigate and find resolution of specific processing problems for assigned projects and parts.
• Prepare quotations for new jobs, including material and processing costs, tooling, gauges and capital investment costs if required.
• Participate in productivity improvement investigations.
• Conduct time studies.
• Maintain ongoing process control through quality troubleshooting and process improvement investigation.
• Regular review of all processes and operator instructions for assigned customers to ensure accuracy and conformance to actual procedures.
• Collect data and develop statistics to describe equipment and system functionality.
• Estimate durations of development, fabrication, construction and repair tasks.
• Define which materials and equipment to use for projects and select appropriate codes.
• Complete work order and change work order forms to notify key parties about projects.
• Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Credentials

• Post-Secondary education in Engineering or Equivalent.
• Minimum three years of related experience.
• Knowledge/work experience in machine processes, cutting tools, fixtures, CNC and Special purpose machines.
• Working knowledge of ISO-TS16949 and ISO 14001, and with mechanical blueprint interpretation including GD and T.
• Good computer skills, including Word, Excel and Outlook.
• Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining (i.e. AutoCAD, CAD/CAM and SolidWorks).

Desired Characteristics

• Able to interact with supervisors or managers and integrate work within teams of engineers and technicians to work on common projects.
• Attend formal professional development seminars and conferences as needed.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.