Responsible to perform PSAs (Potential Supplier Audits), responsible to close out PSA audit short falls.  Responsible to manage the APQP process to support program launches.  Responsible to develop and continually improve our Engineering Feasibility documents to include lessons learned by commodity/component.  Support supply crisis situations related to capacity and quality.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·       Ensure compliance with all legislative requirements in the facility’s geographic location and:

o   The Global Operating System Plays;

o   OHSAS 18001:2007 Health and Safety Management system standard;

o   ISO 14001:2004 Environmental Management System standard;

o   IATF/TS16949 Technical Specification Management and Linamar Quality Basics System standards.

·       Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.

·       Maintain balance between customer, employee, and financial satisfaction by maximizing facility/department Performance Indicators (Linamar Supplier Scorecard System).

·       Supply Management including APQP, Launch, PSA’s and crisis management.

·       Maintain effective communication with internal and external customers to ensure program requirements are met.

·       Interpret regulatory quality documents in order to apply them to manufacturing and quality systems.

·       Be actively involved in quality planning of the supply base (Control Plans, APQP, FMEA, PPAP, MSA).

·       Identify gauging methods required for the supplier to ensure quality requirements are met.

·       Participate & lead in APQP meetings.

·       Initiate and participate in 8D Problem solving meetings with suppliers.

·       Review accuracy of process documentation and update as required.

·       Supplier development activities (Prototype running, pre-production process analysis, run at rate on site, early containment evaluation, process production release).

·       Part Readiness follow up and support.

·       Safe launch assurance and/or red launch follow up and solution.

·       Follow up on lessons learned matrix and read across, ensure added to engineering feasibilities by commodity/component.

·       Willingness to travel as needed.

Credentials

·       A bachelor’s degree in engineering or related engineering discipline is required.

Desired Characteristics

·       Five to seven years of related experience.

·       Experience with risk analysis and problem failure modes and effects analysis (FMEA) for automotive products.

·       Experience in writing and executing engineering test protocols.  Write quality assurance reports that describe manufacturing problems, corrective actions taken, and preventative measures needed.  Proposals are usually written for non-technical audiences such as clients and management.

·       Ability to make presentations to senior management during annual meetings to provide an overview of areas such as product costing, maintenance and equipment failures which need to be considered when planning for the coming year.

·       Read operating and quality assurance reports to understand technical and operational information about facilities, processes, and equipment.

·       Experience in drawing interpretations and geometric dimensional tolerancing.  Knowledge and experience in gauging methods, calibration, and gauge R&R’s.  Ability to take precise measurements using specialized equipment and techniques.

·       Lead and co-ordinate project teams which include other engineers, technologists, clients, and contractors when designing, developing, and building products or facilities.

·       Proficient with MS Office and CAD applications. Familiar with material processes and IATF/TS16949 standards.  Experience with the use of statistical analysis software and computer-assisted design, manufacturing, and machining.

·       Attend formal professional development seminars and conferences as needed.  Conduct self-directed studies by reading journals and trade publications.  Must be aware of new technologies and advances in the engineering field.

What Linamar Has To Offer

·       Opportunities for career advancement.

·       Community based outreach supporting both local and global initiatives and charities.

·       Social committees and sports teams.

·       Discounts for local vendors and events, including auto supplier discounts.

Working on the line you will machine parts and perform quality checks in a timely manner. These positions require shift work and the ability to work overtime.
 
Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

Requirements
 

• Previous Manufacturing experience is an asset
• Ability to work all rotating shifts
• Ability to work overtime as required
• Must be willing to learn
• Work independently and as part of a team
• Must be 16 years of age to work on the shop floor

Why Linamar
 
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

The Janitor position is responsible for cleaning and maintaining the interior and exterior of building, facilities and the surrounding grounds. Additional responsibilities include removal of waste and recycling containers and maintain sanitary conditions to ensure employee safety.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·    Empty garbage and recycling bins in office and plant.
·    Clean & sanitize all washrooms, cafeterias, and kitchenettes per housekeeping plan.
·    Operate industrial vacuum cleaners to remove scraps, dirt, heavy debris, and other refuse.
·    Sweep, mop, and scrub hallways, floors, and stairs.
·    Maintain outside company property. Eg: garbage pickup, window cleaning (lower levels only).
·    Work in conjunction with maintenance personnel as needed.
·    Maintain janitorial inventory levels. 
·    Operate floor scrubbing machine in the plant area.
 

Credentials

·    High School Diploma or equivalent general election.
·    Previous cleaning or janitorial experience considered an asset.
·    Ability to read and understand Workplace Hazardous Materials Information System (WHMIS) labels on products to understand applicable safety cautions.
 

Desired Characteristics

·    Ability to handle complaints and respond to emergency situations.
·    Ability to work independently but coordinate work schedules with others.
·    Good manual dexterity.
·    Attention to detail.
·    Clear and concise communication skills.
·    Able to interact with Supervisor to provide and receive job-related information, assess cleaning situations.
 

What Linamar Has To Offer

· Opportunities for career advancement.
· Community based outreach supporting both local and global initiatives and charities.
· Social committees and sports teams.
· Discounts for local vendors and events, including auto supplier discounts.

Working on the line you will machine parts and perform quality checks in a timely manner. These positions require shift work and the ability to work overtime.
 
Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

Requirements
 

• Previous Manufacturing experience is an asset
• Ability to work all rotating shifts
• Ability to work overtime as required
• Must be willing to learn
• Work independently and as part of a team
• Must be 16 years of age to work on the shop floor

Why Linamar
 
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

285 Massey Road, Guelph, Ontario, N1K 1B2, CA

The Level 4 – Maintenance Multi Skilled is responsible for maintaining, troubleshooting and repairing a variety of mechanical, electrical, and electronic systems within an industrial environment.

Responsibility

·         Diagnose and repair mechanical, electrical, pneumatic and hydraulic issues of the production equipment to minimize downtime.

·         Perform predictive and preventative maintenance on machinery and equipment according to established schedules.

·         Assist in the installation and commissioning of new equipment, ensure all systems are properly integrated and functional.

·         Repair and replace defective parts, such as bearings, gears, belts and motors.

·         Conduct precision alignments and adjustments on machinery.

·         Execute mechanical rebuilds of the machinery and components.

·         Troubleshoot, repair and replace PLCs (Allen Bradley PLC, Fanuc / Siemens CNC controls)and other PC-based systems

·         Identify opportunities for process improvements to enhance equipment efficiency and reliability.

·         Read and interpret drawings, blueprints and schematics.

·          Close work orders using maintenance tracking system.

Academic/Educational Requirements

·         High school diploma or qualification.

Certificate of Qualification for both Industrial Electrician 442A and Industrial Mechanic Millwright 433A.

Required Skills/Experience

·         Fully capable of Level 3 – Maintenance Fully Skilled and Electrician responsibilities.

·         Minimum of 2-years of experience in manufacturing environment.

Working Conditions

40 hours per week

Shift work (Rotation/ Straight/ continental)

Maintenance and Production area as required.

Sunday to Saturday

Facility Specific

Ensure compliance with all legislative requirements in the facility’s geographic location including but not limited to:

·         ISO 45001: Health and Safety management system standard.

·         ISO 14001: Environmental Management system standard.

·         IATF 16949 Technical Specification Management

Ensure compliance with Linamar’s internal operating system known as ‘GOS’: The Global Operating System

Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors

Maintain department 5S requirements.

Owner Operator Truck Driver – Long Distance

QUALIFICATIONS:
• A minimum of three (3) years of verifiable driving experience is required, including at least one year as an owner-operator.
• Equipment must not be more than 7 years old and have a maximum of 600,000 miles. Equipment must pass an onboarding inspection at a Linamar approved facility.
• Must be legally entitled to work in Canada and to enter the United States
• Must possess a valid class AZ driver’s license that has not been suspended or revoked in the past 36 months
• Must be admissible into the US and able to obtain a FAST card.
• Must meet USDOT medical requirements
• Must provide a recent criminal record search or a valid FAST card
• Must provide an original driver’s abstract no older than 3 months, no more than 3 demerit points
• Must provide an original CVOR abstract no older than 3 months
• Must submit a negative drug screen
• Must be capable of meeting the physical demands of the job
• Must satisfactorily complete a road test by a LTI appointed evaluator
• Must not have any preventable accidents within the last three years where the claim exceeds $3000

RESPONSIBILITIES:
• Operate and drive articulated or straight trucks, weighing over 4600 kg with three or more axles to transport goods and material to destinations
• Oversee all aspects of vehicles, such as condition of equipment, loading and unloading, and safety and security of cargo
• Perform pre-trip inspection of vehicle systems and equipment such as tires, lights, and brakes.
• Record cargo information, distance traveled, fuel consumption, and other information in log book and/or on board computer
• Communicate with dispatcher and other drivers using on-board computer, cell phone, and CB radio

700 Woodlawn Road West, Guelph, Ontario, N1K 1G4, CA

Performance Expectations

Plan and direct highway and/or local drivers on daily freight pick-up and deliveries

Pre-plan driver’s trip itineraries and communicate those with all drivers

Track equipment, freight, and drivers through use of satellite and/or two-way radio

Communicate and direct customer service on issues and information that need to be communicated to customers, such as freight delivery delays and billing issues

Collect, sort, and distribute all driver trip envelopes

Ensure that all driver trip envelops are complete and accurate

Ensure that all customer needs and freight requirements are met through instructions and trip planning of the drivers

Prioritize loads and customers to accommodate changes and problems as they arise

 

Credentials

Completion of Secondary school diploma

Ability to interpret and give both verbal and written instructions

Excellent verbal and written communication skills

Prioritization skills and be multi-task oriented

Ability to develop and maintain co-operative working relationships with co-workers and customer

Ability to accomplish task in a controlled, effective manner while working under stress

Keen attention to detail

Leads and directs the work of others

What Linamar Has To Offer

Opportunities for career advancement.

Community based outreach supporting both local and global initiatives and charities.

Social committees and sports teams.

Discounts for local vendors and events, including auto supplier discounts.

 700 Woodlawn Road West, Guelph, Ontario, N1K 1G4, CA

The Level 1 – Maintenance Labourer position, under the supervision and direction of the Maintenance Supervisor assist Millwrights and Maintenance Mechanics in day to day maintenance activities.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Maintain systems to track, report, document and assist with scheduled preventative maintenance.

· Record coolant refractometer readings, top up machine oils, and record usage.

· Manage oil and coolant inventories.

· Housekeeping of storage area for fluids.

· Operate forklift and floor scrubber.

· Maintain equipment in a safe and clean manner.

· Ability to use CMMS (computerized maintenance and manufacturing system).

· Ensure compliance of maintenance instruction sheets and procedures.

· Attend maintenance daily meeting.

· Measure various physical properties using common measuring tools such as rulers, tapes, thermometers and scales.

· Evaluate condition of parts and equipment.

· Assess the safety of work environments.

Credentials

· High School Diploma or equivalent general education.

· Minimum one year experience in manufacturing.

· Able to observe warning signs, such as scan phrases and icons on caution and warning signs to identify hazards in work areas.

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

Desired Characteristics

· Perform tasks independently under direct supervision.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

41 Minto Road, Guelph, Ontario, N1K 1H5, CA