All jobs within 200 km around Nepean in Maintenance & Repair

JOB SUMMARY

The Transit Facilities Maintenance Unit is responsible for the property management functions associated with the maintenance, operation and repair of all transit facilities.

You are responsible for general maintenance to building mechanical and electrical equipment and for routine and preventive maintenance for all Plant energy systems, such as building automation systems, heating, ventilating and air conditioning systems (HVAC), electrical power systems, and plumbing, drainage and sewage systems.  You also maintain and repair all bus service equipment.

EDUCATION AND EXPERIENCE

Completion of Grade 12

No experience required

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• City policies and procedures affecting shop operations
• Job planning and parts and material requisitioning
• Standard methods, tools, equipment, and materials used in the building repair trades
• Building energy systems, mechanical and electrical operating equipment and bus servicing equipment
• Operation and programming of computer controlled energy systems
• Personal computers, with ability to use corporate office software and the Maintenance Management System
• Knowledge and awareness of safety issues in the workplace, where there are always members of the public close by when work is being undertaken
• Knowledge of applicable health and safety legislation, including the rights and duties of workers.
   

COMPETENCIES, SKILLS AND ABILITIES

• Able to work independently, with minimum direction, and collaboratively with peers and managers as part of a team  
• Able to perform general repair duties 
• Possess sound interpersonal skills and ability to relate to the general public and coworkers
• Communicate effectively, both orally and in writing
• Possess skill in using hand and power tools and equipment with precision
• Able to perform welding or sheet metal fabrications relating to the work 
• Possess analytical skills and be detail oriented
• Operate within a computerized maintenance management System
• Able to operate repair vehicles, scissor lift, fork lift, mobile personal lifting devices, cranes, and to use ladders
• Must be able to organize, clean and maintain a safe work area within a public environment 
• Must be capable of relating to transit customers, while working in a public environment, and accepting that information requests, complaints, or incidents of confrontational behaviour may occur
• Demonstrate a positive attitude, flexibility and adaptability
• Able to relate to Transit customers, co-workers and the general public, and to work in a non-confrontational manner
• Possess a work record of good attendance and job performance 
• Able to follow all safety rules and regulations
• Possess excellent hand/eye coordination, and manual dexterity 
• Physically fit, with stamina to perform the job duties (which may include working in a standing position for long time periods, carrying materials, working in cramped areas or at considerable heights, and working outdoors year round)
• Provide own hand tools relating to the trade according to provisions of the Collective Agreement
• Able to work overtime, be available for scheduled overtime, work a variety of scheduled shifts including split shifts, weekends and evenings, as per the Collective Agreement and/or as required 
   

JOB SUMMARY

The City of Ottawa has been named one of the National Capital Region’s Top Employers, and one of Canada’s Best Diversity Employer for five consecutive years.  Fleet Services supports all City departments that rely on vehicles and equipment to deliver their services and operates out of nine garages located throughout the city.  We currently have openings for Vehicle & Equipment Technicians 1 (310S Mechanics) in our Fleet Maintenance and Technical Service Branch.  

All successful candidates must enroll (application submitted to Skilled Trades Ontario) in a 310T Truck & Coach Technician Apprenticeship through Skilled Trades Ontario (STO) within 15 business days of accepting their letter of offer. All candidates are expected to adhere to all lawful instructions, make every effort to acquire all skills identified in all relevant training standards, obtain written verification from Sponsor(s) and the Sponsor’s trainer(s), and fulfill all classroom training requirements. Failure to comply may result in suspension or revocation of the training agreement with STO.

The City of Ottawa is a diverse, inclusive, and supportive workplace, committed to providing all employees with an opportunity to thrive. We support employees to learn, progress and grow with access to development opportunities like mentoring, coaching, job shadowing, special on-the-job assignments, leadership development, language training, job-specific training, and all required health and safety training.
Unionized with CUPE 503, the City offers an excellent employee benefits package and pension plan along with other benefits as listed below, to ensure that our employees and their families have access to the resources they need (as outlined in the CUPE 503 Collective Agreement):
•    Health, Dental and Vision Care benefits
•    Paid sick leave
•    Special leave 
•    Long term Disability
•    Life Insurance
•    Membership in OMERS pension fund with 100% Employer matching pension contributions
•    Employee and Family assistance programs that helps you and your family find solutions for a wide range of life’s challenges.
•    Progressive vacation time accrual based on length of service (3 weeks vacation to start that increases to 4 weeks after five years of continuous service and progressing up to a maximum of 7 weeks)
•    13 paid public holidays as listed in the Collective Agreement
•    Tools Allowance - $460 annually
•    Boots Allowance - $225 annually
•    Shift Premiums – an additional 7% hourly on qualified shifts as per the Collective Agreement
•    Overtime pay: any hours worked above the regular schedule are paid at a rate of 1.5 times the regular hourly rate as per the Collective Agreement
•    Paid Uniforms
•    Learning and development - Learning and development options include e-learning online resources, and in-class or virtual instructor-led courses.

JOB SUMMARY

Fleet Maintenance & Technical Services is responsible for: scheduled, unscheduled and emergency service; seasonal overhauls; vehicle commissioning/decommissioning; vehicle inspections and certifications; warranty monitoring; shop and specialty tool maintenance/management; maintenance of small equipment and special equipment such as fire, ambulance, ice resurfacing, turf, etc.; repair performance analysis; and Technical Services including specifying, acquiring, leasing and disposing of Municipal Fleet Vehicles.

You are responsible for performing a wide range of duties expected of a Vehicle and Equipment Technician 1, including, but not limited to, the following: conducting diagnostic inspections, performing general mechanical overhaul and repair work, and performing scheduled preventive daily maintenance inspections and repairs on vehicle system and components including, but not limited to, steering, suspension, electrical, ignition, fuel, emission control/exhaust and engine management, hydraulics, and vehicular climate control systems.  

You perform all maintenance and repairs to a wide variety of fleet vehicles systems and components including, but not limited to, vehicles powered by gas, diesel, propane or natural gas, tractors, graders, loaders, dozers, cranes, mowers, cars, heavy vehicles (up to 9000 Kilograms), and automotive associated equipment including, but not limited to, boilers and compressors.

EDUCATION AND EXPERIENCE

Completion of Automotive Service Technician 310S apprenticeship program of 7220 hours

Minimum of 2 years of experience within a Municipal Fleet or similar automotive environment 

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• City policies and procedures affecting shop operations
• Considerable knowledge of the vehicle systems and the standard practices, safety issues, materials, tools, equipment and supplies to carry out maintenance operation
• Manual and electronic diagnostic equipment 
• Personal computers with ability to use the Fleet Management Information System
• Code of Conduct rules and policy
• Collective agreement
• Material Safety Data Sheets
• Safe work practices of the trade including working at heights and the lifting of heavy objects
• Knowledge of applicable health and safety legislation, including the rights and duties of workers.

COMPETENCIES, SKILLS AND ABILITIES

• Successful completion of a pre-employment ergonomic assessment is required
• Physically fit with stamina to perform the duties of the trade (which may include working in a standing position for long time)
• Able to work in uncomfortable or confined positions on occasion
• Able to lift and carry heavy parts and equipment safely
• Work independently with minimal direction, and collaboratively with peers and managers as part of a maintenance repair team 
• Ability to read, understand and interpret blueprints, wiring diagrams, service manuals, schematics, drawings, and work orders and any other documents used in the maintenance operation
• Ability make estimates of materials and time required to perform the work 
• Ability to proceed effectively with emergency work including on the road work with limited resources to provide maximum results and timelines
• Skill in the use of jacks, hoists, overhead cranes, lift trucks and mobile lifting devices
• Skill in the use of high-pressure gas and electric welding equipment (Mig. Arc. Bronze, steel, aluminum) to effect repairs as authorised under the technician license
• Possess analytical skills and be detail oriented
• Good manual dexterity and ability to work to close tolerances 
• Able to tolerate exposure to moderate amounts of noise, dust, grit, oil/grease, fumes, solvents, paints, lacquers, hot/sharp metals and surface finishing products
• Able to communicate effectively, both orally and in writing, with management, manufacturers and engineers to provide for problem solving and suggest corrections to problems found on specialized vehicles and equipment
• Ability to provide training and explain instructions and guidelines to others effectively
• Able to efficiently use, operate and maintain tools, precision measuring instrument, state-of-the-art automotive diagnostic and test equipment to diagnose mechanical, electrical and hydraulic malfunctions
• Possess a work record of good attendance and job performance 
• Possess sound judgement 
• Use initiative to meet deadlines
• Flexible, adaptable and able to accept constructive criticism
• Provide own hand and air tools relating to the trade (SAE & Metric as required) according to provisions of the collective agreement 
• Able to work a variety of scheduled shifts, including weekends, on-call, evening and nights, as per the collective agreement
   

JOB SUMMARY

The Transit Fleet and Facilities Maintenance team provides safe, reliable, efficient, timely and cost-effective transit vehicle maintenance services to support federally regulated transit services within the City of Ottawa. 

Reporting to a Garage Supervisor, you are responsible for performing a wide range of duties expected of a Truck and Coach Technician, including, but not limited to, the following: conducting diagnostic inspection of vehicles*, performing general mechanical overhaul and repair work , and performing daily maintenance repairs.  You perform all unit changes or repairs to Fleet vehicles (including but not limited to transmission, brakes, suspensions, electrical components, injectors, radiators, steering, differentials and air systems) and make miscellaneous adjustments to doors, destination signs and other vehicle systems.

vehicles*-refers to buses within the Transit Fleet Maintenance Division and any other Fleet vehicle within the Municipal Maintenance Division (cars/trucks, forklifts, etc.).

EDUCATION AND EXPERIENCE

Completion of Truck and Coach Technician apprenticeship program of 6720 hours

Completion of advanced technical courses is an asset

Minimum of 1 year of experience following attainment of certification

 

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• City policies and procedures affecting shop operations
• Considerable knowledge of the vehicle systems, and the standard methods, tools, and equipment used in the trade 
• Diagnostic equipment 
• Personal computers, with ability to use the Fleet Management Information System.
• Safe work practices of the trade.
• Knowledge of applicable health and safety legislation, including the rights and duties of workers
   

COMPETENCIES, SKILLS AND ABILITIES

• Successful completion of a pre-employment ergonomic assessment is required
• Work independently, with minimal direction, and collaboratively with peers and managers as part of a maintenance repair team  
• Read, understand and interpret service manuals, schematics, drawings, and work orders
• Plan work and make estimates of materials and time required to perform the work
• Perform safety inspections on buses/vehicles
• Operate within a computerized Fleet Management Information System
• Ability and facility to use tools and equipment with precision
• Possess analytical skills and be detail oriented
• Communicate effectively, both orally and in writing
• Able to efficiently use, operate and maintain tools and state-of-the-art automotive diagnostic and test equipment 
• Able to organize, clean and maintain a safe work area
• Possess a work record of good attendance and job performance 
• Possess sound judgement 
• Use initiative to meet deadlines
• Able to establish and maintain good working relationships with fellow employees in a team environment
• Good manual dexterity and ability to work to close tolerances 
• Able to tolerate exposure to moderate amounts of noise, dust, grit, oil/grease, fumes, solvents, paints, lacquers, hot/sharp metals and surface finishing products
• Physically fit, with stamina to perform the duties of the trade (which may include working in a standing position for long time periods)
• Able to work in uncomfortable or confined positions on occasion
• Provide own hand tools relating to the trade (SAE & Metric as required) according to provisions of the Collective Agreement 
• Able to work a variety of scheduled shifts, including week-ends, on-call and nights, as per the Collective Agreement

JOB SUMMARY

You are responsible for operating heavy equipment as contained in the equipment table below.

• Auto Cone 5000
• Backhoe with loader attachment only
• Crew cab dump over 1 ton without attachment or trailer
• Crew cab with trailer over 1000 kgs and up to 4600 kgs
• Crew cab dump with attachment or with trailer up to 4600 kgs
• Flusher/Water truck # 5 ton and over
• Garbage Compactor (Parks)
• Plow truck or straight salt truck (single and tandem axle)
• Ride on Mower (Over 72" cut)
• Ride-on Sidewalk sweeper
• Single axle dump truck
• Single axle hoist truck
• Tandem dump truck with attenuator
• Tandem dump truck without attachment or trailer
• Tractor with or without attachment (Bombardier, Holder, trackless, farm tractor, mower, sidewalk plow,
• sidewalk blower, etc.)
• Tri-axle dump truck without trailer
• Truck over 1 ton, with attachment or with trailer up to 4600 kgs 

EDUCATION AND EXPERIENCE

Completion of some secondary school (minimum Grade 10)

Minimum of 13 months of experience
 

CERTIFICATIONS AND LICENCES

JOB SUMMARY

The mandate of Facility Operations is to operate and maintain all City facilities and City-managed buildings, which represents approximately 900 buildings and includes police, fire, libraries, child care, paramedic posts, recreation, culture, public works, City Hall and other administrative buildings, long-term care facilities, and facility outdoor property. The Facility Operations units deliver facility management and maintenance services within assigned geographic and/or specialty areas.

You are responsible for performing duties associated with the operation and maintenance of all City facilities including but not limited to; minor maintenance and carpentry tasks, painting, grounds maintenance, snow removal, basic repair duties for facilities equipment and general housekeeping tasks while maintaining a high standard of cleanliness and customer service. You may be responsible to work rotational shifts including days, evenings and weekends. 

EDUCATION AND EXPERIENCE

Completion of Grade 10

Up to one month of related experience

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• General facility cleanliness and safe work practices
• Cleaning chemicals and disinfectants and safe application/procedures
• Effective cleaning techniques
• WHMIS
• Customer Service principles
• Knowledge of applicable health and safety legislation, including the rights and duties of workers.

COMPETENCIES, SKILLS AND ABILITIES

• Able to communicate effectively with the general public and staff
• Able to work effectively in a team environment
• Good interpersonal and customer service skills
• Polite and punctual
• Possess the physical capability to perform the ongoing duties of the position
• Prepared to work flexible hours including evenings and weekends
• Presentable to the public

JOB SUMMARY

The City of Ottawa has been named one of the National Capital Region’s Top Employers, and one of Canada’s Best Diversity Employer for five consecutive years.  Fleet Services supports all City departments that rely on vehicles and equipment to deliver their services and operates out of nine garages located throughout the city.  We currently have openings for Vehicle & Equipment Technicians 2 (310T Mechanics) in our Fleet Maintenance and Technical Service Branch.  
The City of Ottawa is a diverse, inclusive, and supportive workplace, committed to providing all employees with an opportunity to thrive. We support employees to learn, progress and grow with access to development opportunities like mentoring, coaching, job shadowing, special on-the-job assignments, leadership development, language training, job-specific training, and all required health and safety training.
Unionized with CUPE 503, the City offers an excellent employee benefits package and pension plan along with other benefits as listed below, to ensure that our employees and their families have access to the resources they need (as outlined in the CUPE 503 Collective Agreement):
•    Health, Dental and Vision Care benefits
•    Paid sick leave
•    Special leave 
•    Long term Disability
•    Life Insurance
•    Membership in OMERS pension fund with 100% Employer matching pension contributions
•    Employee and Family assistance programs that helps you and your family find solutions for a wide range of life’s challenges.
•    Progressive vacation time accrual based on length of service (3 weeks vacation to start that increases to 4 weeks after five years of continuous service and progressing up to a maximum of 7 weeks)
•    13 paid public holidays as listed in the Collective Agreement
•    Tools Allowance - $460 annually
•    Boots Allowance - $225 annually
•    Shift Premiums – an additional 7% hourly on qualified shifts as per the Collective Agreement
•    Overtime pay: any hours worked above the regular schedule are paid at a rate of 1.5 times the regular hourly rate as per the Collective Agreement
•    Paid Uniforms
•    Learning and development - Learning and development options include e-learning online resources, and in-class or virtual instructor-led courses.

JOB SUMMARY

Fleet Maintenance & Technical Services is responsible for: scheduled, unscheduled and emergency service; seasonal overhauls; vehicle commissioning/decommissioning; vehicle inspections and certifications; warranty monitoring; shop and specialty tool maintenance/management; maintenance of small equipment and special equipment such as fire, ambulance, ice resurfacing, turf, etc.; repair performance analysis; and Technical Services including specifying, acquiring, leasing and disposing of Municipal Fleet Vehicles.

You are responsible for performing a wide range of duties expected of a Vehicle and Equipment Technician 2, including, but not limited to, the following: conducting diagnostic inspections, performing general mechanical overhaul and repair work, and performing scheduled preventive daily maintenance inspections and repairs on vehicle system and components including, but not limited to, steering, suspension, electrical, ignition, fuel, emission control/exhaust and engine management, hydraulics, and vehicular climate control systems.  

You perform all maintenance and repairs to a wide variety of fleet vehicles systems and components including, but not limited to, vehicles powered by gas, diesel, propane or natural gas, tractors, graders, loaders, dozers, cranes, mowers, heavy vehicles (i.e. garbage trucks, zambonis, ice resurfacing equipment, etc.), and automotive associated equipment including, but not limited to, boilers and compressors.

EDUCATION AND EXPERIENCE

Completion of Truck and Coach Technician 310T apprenticeship program of 6720 hours

Minimum of 2 years of experience within a Municipal Fleet or similar truck and coach environment

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• City policies and procedures affecting shop operations
• Considerable knowledge of the vehicle systems and the standard practices, safety issues, materials, tools, equipment and supplies to carry out maintenance operation
• Manual and electronic diagnostic equipment 
• Personal computers with ability to use the Fleet Management Information System
• Code of Conduct rules and policy
• Collective agreement
• Material Safety Data Sheets
• Safe work practices of the trade including working at heights and the lifting of heavy objects
• Knowledge of applicable health and safety legislation, including the rights and duties of workers.

COMPETENCIES, SKILLS AND ABILITIES

• Work independently with minimal direction, and collaboratively with peers and managers as part of a maintenance repair team 
• Ability to read, understand and interpret blueprints, wiring diagrams, service manuals, schematics, drawings, work orders and any other documents used in the maintenance operation
• Ability make estimates of materials and time required to perform the work 
• Ability to proceed effectively with emergency work including on the road work with limited resources to provide maximum results and timelines
• Skill in the use of jacks, hoists, overhead cranes, lift trucks and mobile lifting devices
• Skill in the use of high-pressure gas and electric welding equipment (Mig. Arc. Bronze, steel, aluminum) to effect repairs as authorised under the technician license
• Possess analytical skills and be detail oriented
• Good manual dexterity and ability to work to close tolerances 
• Able to communicate effectively, both orally and in writing, with management, manufacturers and engineers to provide for problem solving and suggest corrections to problems found on specialized vehicles and equipment
• Ability to provide training and explain instructions and guidelines to others effectively
• Able to efficiently use, operate and maintain tools, precision measuring instrument, state-of-the-art automotive diagnostic and test equipment to diagnose mechanical, electrical and hydraulic malfunctions
• Possess a work record of good attendance and job performance 
• Possess sound judgement 
• Use initiative to meet deadlines
• Flexible, adaptable and able to accept constructive criticism
• Physically fit with stamina to perform the duties of the trade (which may include working in a standing position for long time)
• Able to work in uncomfortable or confined positions on occasion
• Able to lift and carry heavy parts and equipment safely
• Able to tolerate exposure to moderate amounts of noise, dust, grit, oil/grease, fumes, solvents, paints, lacquers, hot/sharp metals and surface finishing products
• Provide own hand and air tools relating to the trade (SAE & Metric as required) according to provisions of the collective agreement 
• Able to work a variety of scheduled shifts, including week-ends, on-call, evening and nights, as per the collective agreement
   

The mandate of Water Services is to provide treatment and distribution of a sustainable supply of high-quality drinking water and is committed to protecting the environment by collecting and treating wastewater for the health and prosperity of Ottawa. 

You are responsible for planned, unplanned and emergency inspection, testing, installation, maintenance, troubleshooting and/or repair of process mechanical systems and equipment within Water Services’ water treatment, supply and storage facilities (including the Water Purification Plants, pumping stations, reservoirs, elevated tanks, metering facilities and well treatment systems) or wastewater treatment and collection facilities (including Wastewater treatment plant, remote pumping stations, odour control facilities, regulators, lagoons, valve chambers, storage tanks). 

These duties are carried out in an industrial, production, regulated and quality focused environment and, as such, must be completed in consideration of and in close coordination with other engineering, skilled trade and maintenance staff in the Branch.

As a licensed water treatment, wastewater treatment and/or wastewater collection system operator, you are also responsible for operating various pieces of process equipment (in Drinking Water this spans water treatment, distribution and supply process equipment and in Wastewater this spans wastewater treatment and collection process equipment) and/or adjusting various water or wastewater treatment system process parameters, after prior consultation with and in close coordination with other licensed operating staff in the Branch.

Note these systems and equipment include, but are not limited to:  process chemical feed, metering, piping and storage systems (e.g. sulphuric acid, sodium hypochlorite, aluminium sulphate, sodium silicate, sodium bisulphite, sodium hydroxide, potassium permanganate, hydrofluorosilicic acid, aqueous ammonia, etc.), raw water, treated drinking water, effluent water and sanitary sewage screening, processing, metering, piping, pumping and valve systems (fractional horsepower to several thousand horsepower, 6mm to 2450m dia or 4500mm x 3600mm), sludge collection, transfer and mixing systems, pressure and flow control valves, crane, rigging and hoisting systems (up to 5 tons), pumps, blowers, motors, engines, compressors, vacuum systems, gear boxes, clutches, turbines and centrifuges (fractional horsepower to several thousand horsepower). The equipment may or may not be drained, evacuated or energized, during the work, and is located in a variety of locations including chemical feed and storage areas, electrical equipment rooms, machine rooms, generator rooms, pump rooms, valve rooms and chambers, confined spaces, elevated tanks, above and below grade chambers, tanks and reservoirs, outdoor power substations, office areas, etc.

EDUCATION AND EXPERIENCE

Completion of Industrial Millwright apprenticeship program of 8000 hours 

Minimum of 5 years of experience as a licensed Industrial Millwright in a combination of both process-dependant industries and construction services including demonstrated experience in the maintenance, troubleshooting and repair of industrial and process mechanical equipment and the installation, construction and commissioning of process mechanical and chemical feed systems.

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• Canadian Building Code
• Ontario Plumbing Code
• Relevant Ontario Ministry of the Environment and Climate Change (MOECC) acts, regulations, standards and guidelines
• Relevant Ontario Ministry of the Labour (MOL) acts, regulations, standards and guidelines
• Branch, Departmental, Unit and Section roles and responsibilities
• Relevant City, Branch, Departmental, Unit and Section procedures, policies, manuals and processes 
• City Purchasing Bylaw and policies as related to authorized purchases and responsibilities
• CVOR Vehicle Requirements, as identified by the Province
• Metal pipe, tube and plate heating, forming, cutting, welding, soldering, brazing and jointing tools, methods and techniques
• No-metal pipe and tube bending, forming, cutting, fusing, bonding and jointing tools, methods and techniques
• Installation, inspection, testing, maintenance and repair methods and procedures for small to large (fractional to several thousand horsepower) process mechanical equipment including engines, pumps, motors, compressors, gearboxes, turbines, centrifuges, etc.
• Installation, inspection, testing, maintenance and repair methods and procedures for small to large (6mm to 2450m diameter and 4500mm x 3600mm) process piping, jointing and valve systems, etc.
• Precision measurement, vibration and alignment techniques and equipment
• Math concepts applicable to the trade
• Working knowledge of electrical, electronic and instrumentation equipment, materials and maintenance procedures
• Computer system applications pertinent to water and wastewater treatment and collection facilities including SCADA Systems and Maintenance Management Systems
• MS Office and Outlook
• Knowledge of applicable health and safety legislation, including the rights and duties of workers
• Knowledge of TSSA rules & regulations
• Knowledge of operational, monitoring and control functions associated with drinking water treatment and water pumping/storage processes, or wastewater treatment and collection processes is desirable

COMPETENCIES, SKILLS AND ABILITIES

• Work effectively, with others and independently
• Communicate clearly and concisely, both orally and in writing, including completing technical, test and other reports or forms
• Perform trade related preventive and corrective maintenance procedures
• Able to operate small and large equipment (e.g. Person Lifts, Zoom Boom, Manitou, Forklift etc.)
• Analyze, identify, prioritize and solve problems quickly and effectively
• Use a wide range of hand tools, heating, cutting and welding tools, machine shop tools, measurement tools and testing equipment
• Make precise and accurate measurements layouts
• Accurately read, interpret and mark-up technical drawings
• Clearly sketch mechanical schematics and installations
• Understand and effectively utilize new information for problem-solving and decision-making
• Good organizational skills
• Readily establish effective interpersonal relationships
• Alertness, dependability, punctuality
• Work well under pressure 
• Shows initiative, strong judgement and a high degree of reliability
• Physical ability to perform assigned tasks, including climbing ladders, scaffolds and elevated tanks, entering confined spaces
• Willingness to work outside of normal hours
• Utilize appropriate or specialized PPE and safety equipment such as SCBA, rescue equipment, personal gas monitors and fall protection

• On Account & expanded Operational roles 
• Facility Management Office roles to support accounts 
• Project Management roles support projects 

KEY DUTIES & RESPONSIBILITIES 

Safety Ownership and Regulatory Compliance 

• Comply with all internal and external requirements including but not limited to environmental, health and safety, fire protection and mandated by BGIS Health Safety and Environment Teams and enforced by law. 
• Take ownership of safety measures relates to building equipment, ensuring the secure operation of critical systems. 

 Technical Leader and Oversight: 

• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained. 
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems. 
• Participates in and assists with facility-related projects. 
• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair. 
• Maintains all assigned tools and arranges for repair and replacement where required. 
• Assume technical leadership in maintaining and optimizing building equipment to prevent disruptions to tenant operations. 

• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise 
• Communicate technical information effectively, with a focus on building equipment, to internal teams and external vendors. 
• Escalate critical equipment-related issues to minimize downtime and tenant disruptions. 
• Maintain open and technical communication channels with stakeholders, emphasizing equipment status and maintenance updates. 

Work Order Management: 

• Manages work order life cycle in partnership with the Central Work Order Management Team progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements. 
• In partnership with the BGIS CMMS Team, Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained. 
• Ensures the way work is performed is following corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements. 
• Prioritize technical work orders related to building equipment to minimize business disruptions for tenants. 
• Efficiently coordinate technical assignments and oversee the timely completion of equipment-related tasks. 
• Maintain thorough records of technical work order history, including equipment-specific details and expenses. 

 Financial Ownership (Including Quotes Management): 

• Submits all expenditures on a timely basis. 
• In partnership with the Maintenance Lead, FM, and Regional Director, manage the budget for building equipment maintenance, seeking cost-effective solutions to ensure tenant operations are unaffected. 
• Solicit and evaluate technical quotes for equipment repairs, maintenance, and upgrades, with a strong focus on minimizing tenant disruptions. 

Vendor Management: 

JOB SUMMARY

The City of Ottawa has been named one of the National Capital Region’s Top Employers, and one of Canada’s Best Diversity Employer for five consecutive years.  Fleet Services supports all City departments that rely on vehicles and equipment to deliver their services and operates out of nine garages located throughout the city.  We currently have openings for Vehicle & Equipment Technicians 2 (310T Mechanics) in our Fleet Maintenance and Technical Service Branch.  
The City of Ottawa is a diverse, inclusive, and supportive workplace, committed to providing all employees with an opportunity to thrive. We support employees to learn, progress and grow with access to development opportunities like mentoring, coaching, job shadowing, special on-the-job assignments, leadership development, language training, job-specific training, and all required health and safety training.
Unionized with CUPE 503, the City offers an excellent employee benefits package and pension plan along with other benefits as listed below, to ensure that our employees and their families have access to the resources they need (as outlined in the CUPE 503 Collective Agreement):
•    Health, Dental and Vision Care benefits
•    Paid sick leave
•    Special leave 
•    Long term Disability
•    Life Insurance
•    Membership in OMERS pension fund with 100% Employer matching pension contributions
•    Employee and Family assistance programs that helps you and your family find solutions for a wide range of life’s challenges.
•    Progressive vacation time accrual based on length of service (3 weeks vacation to start that increases to 4 weeks after five years of continuous service and progressing up to a maximum of 7 weeks)
•    13 paid public holidays as listed in the Collective Agreement
•    Tools Allowance - $460 annually
•    Boots Allowance - $225 annually
•    Shift Premiums – an additional 7% hourly on qualified shifts as per the Collective Agreement
•    Overtime pay: any hours worked above the regular schedule are paid at a rate of 1.5 times the regular hourly rate as per the Collective Agreement
•    Paid Uniforms
•    Learning and development - Learning and development options include e-learning online resources, and in-class or virtual instructor-led courses.

JOB SUMMARY

Fleet Maintenance & Technical Services is responsible for: scheduled, unscheduled and emergency service; seasonal overhauls; vehicle commissioning/decommissioning; vehicle inspections and certifications; warranty monitoring; shop and specialty tool maintenance/management; maintenance of small equipment and special equipment such as fire, ambulance, ice resurfacing, turf, etc.; repair performance analysis; and Technical Services including specifying, acquiring, leasing and disposing of Municipal Fleet Vehicles.

You are responsible for performing a wide range of duties expected of a Vehicle and Equipment Technician 2, including, but not limited to, the following: conducting diagnostic inspections, performing general mechanical overhaul and repair work, and performing scheduled preventive daily maintenance inspections and repairs on vehicle system and components including, but not limited to, steering, suspension, electrical, ignition, fuel, emission control/exhaust and engine management, hydraulics, and vehicular climate control systems.  

You perform all maintenance and repairs to a wide variety of fleet vehicles systems and components including, but not limited to, vehicles powered by gas, diesel, propane or natural gas, tractors, graders, loaders, dozers, cranes, mowers, heavy vehicles (i.e. garbage trucks, zambonis, ice resurfacing equipment, etc.), and automotive associated equipment including, but not limited to, boilers and compressors.

EDUCATION AND EXPERIENCE

Completion of Truck and Coach Technician 310T apprenticeship program of 6720 hours

Minimum of 2 years of experience within a Municipal Fleet or similar truck and coach environment

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• City policies and procedures affecting shop operations
• Considerable knowledge of the vehicle systems and the standard practices, safety issues, materials, tools, equipment and supplies to carry out maintenance operation
• Manual and electronic diagnostic equipment 
• Personal computers with ability to use the Fleet Management Information System
• Code of Conduct rules and policy
• Collective agreement
• Material Safety Data Sheets
• Safe work practices of the trade including working at heights and the lifting of heavy objects
• Knowledge of applicable health and safety legislation, including the rights and duties of workers.

COMPETENCIES, SKILLS AND ABILITIES

• Work independently with minimal direction, and collaboratively with peers and managers as part of a maintenance repair team 
• Ability to read, understand and interpret blueprints, wiring diagrams, service manuals, schematics, drawings, work orders and any other documents used in the maintenance operation
• Ability make estimates of materials and time required to perform the work 
• Ability to proceed effectively with emergency work including on the road work with limited resources to provide maximum results and timelines
• Skill in the use of jacks, hoists, overhead cranes, lift trucks and mobile lifting devices
• Skill in the use of high-pressure gas and electric welding equipment (Mig. Arc. Bronze, steel, aluminum) to effect repairs as authorised under the technician license
• Possess analytical skills and be detail oriented
• Good manual dexterity and ability to work to close tolerances 
• Able to communicate effectively, both orally and in writing, with management, manufacturers and engineers to provide for problem solving and suggest corrections to problems found on specialized vehicles and equipment
• Ability to provide training and explain instructions and guidelines to others effectively
• Able to efficiently use, operate and maintain tools, precision measuring instrument, state-of-the-art automotive diagnostic and test equipment to diagnose mechanical, electrical and hydraulic malfunctions
• Possess a work record of good attendance and job performance 
• Possess sound judgement 
• Use initiative to meet deadlines
• Flexible, adaptable and able to accept constructive criticism
• Physically fit with stamina to perform the duties of the trade (which may include working in a standing position for long time)
• Able to work in uncomfortable or confined positions on occasion
• Able to lift and carry heavy parts and equipment safely
• Able to tolerate exposure to moderate amounts of noise, dust, grit, oil/grease, fumes, solvents, paints, lacquers, hot/sharp metals and surface finishing products
• Provide own hand and air tools relating to the trade (SAE & Metric as required) according to provisions of the collective agreement 
• Able to work a variety of scheduled shifts, including week-ends, on-call, evening and nights, as per the collective agreement