All jobs within 400 km around Bracebridge in Maintenance & Repair

Overview

Servising the following areas: Bolton - Collingwood- Midland- Parry Sound -Huntsville  
Shift/Hours – Monday to Friday Afternoons (hours may vary) Must be available on the weekend should there be a business need. Depending on the seniority. 

Pay Rate: 
During Training- $28.68/h 
After Training - $30.59/h

As our Welder, you will provide support to the department and Superintendent.

Position Overview:

• Responsible for welding, ironwork, or mechanical related tasks.
• Accurately and effectively uses various types of welding and cutting equipment.
• Responsible for safe use of equipment including forklift, skid steer loader, scissor lifts, and power tools.
• Reads and understands construction drawings, including providing accurate layout of the work and building to drawings and specifications.

Qualifications Needed:

• Appropriate level of experience in welding or enrolled in an Apprenticeship Program.

• Valid driver’s license and reliable vehicle are required.

• Must be able to work a 21/7 work rotation with extended time away from home.
• Own and maintain basic trade tools.

Want to know more?  Apply through our career board.  First time applicants will need to complete a profile.  Or send your resume to careers@fwsgroup.com

Our Bus Fleet Maintenance team is seeking a Serviceperson II on contract for up to 12 months to service buses under the supervision of the Supervisor, Fleet Maintenance. 

What will I be doing?

• Servicing, fuelling, parking and Bus cleaning as it relates to the fuel and mop lines.
• Performing change-offs as required
• Services the bus fleet by fuelling, sweeping, driving, and checking buses, circle check inspections, and performing minor repairs.
• Performs interior, exterior and maintenance cleaning duties on the bus, and support fleets.
• Completes on-the-road change-offs and road calls.
• Performs spills containment and clean up.
• Performs emission tests.
• Performs wheel-nut torques.
• Performs other related duties as assigned.

What Skills and Qualifications Do I Need?

• Knowledge of motor vehicle repairs normally attained through completion of a high school program with an emphasis on motor vehicle repairs. 
• A minimum of one (1) year of experience in servicing buses or heavy equipment, as well as, assisting with repairs in bus or heavy vehicle maintenance environment.
• Must successfully complete mandatory environmental, safety and all other training required by corporate policy including new courses that are or could be adjusted with these policies
• Knowledge of vehicle repairs and evolving technologies including new Electric Vehicles (EV) would be considered an asset. 
• Must have a valid Ontario Class “G” driver’s licence and must meet corporate standard for a good driving record. A Driver’s Abstract (within the last 3 months) will be required of the successful candidate(s).
• Must have the ability to obtain and maintain Class “C” driver’s licence and “Z” endorsement. 
• Must be able to obtain GO Transit Forklift driving certificate.   
• Must successfully complete environmental, safety and any other training required by corporate policy. 
• Ability to obtain job related certifications as required. 

Available Shifts/Locations: 

12 month contract  - East Gwillimbury Bus Garage  -  19:00-05:00 Thursday, Friday, Saturday, Sunday and Monday. OFF on Tuesday and Wednesday.

Note: This is a unionized position. As such, specific home bases, locations, shifts, shift hours and/or days off are assigned based on seniority and may be changed due to operational needs. They may include weekends, evenings, split shifts & holidays.

The Quaker Millwright will be the first responder to assist with expertise in support of all area breakdowns at the plant as needed or required.

What you can expect from us:

• Competitive compensation and comprehensive benefits designed to fit your unique needs
• A dynamic and inclusive culture that promotes you to bring your whole-self to work
• Inspiring positive change for people and the planet with sustainability goals
• A supportive team that will encourage your professional growth and development

Compensation:$43.86/ Hour Plus Premiums

Responsibilities

• Expected to quickly respond and diagnose problems in order to determine the best method of repair based on safety and production requirements by assessing failures and implementing alternative solutions to keep production/packaging lines running
• Work collaboratively with all operations during Autonomous Maintenance sessions and Breakdown Maintenance and when addressing reoccurring problems and other department maintenance requirements.
• Ensure Preventive Maintenance and Preventive Maintenance Inspection are completed and provide detailed follow-ups of future work needed.
• Work collaboratively with other trades and Department SME’s on projects, rebuilds, Autonomous Maintenance, Preventative Maintenance Breakdown Maintenance and other jobs as required.
• Other duties as assigned by the manager

Shifts:The successful candidate must be available for 5x8 rotation. 

Qualifications

• Ability to install, repair, service, test and troubleshoot equipment
• Excellent communication, interpersonal and diagnostic skills
• Working knowledge of the equipment needed for the job
• Must be able to meet the physical requirements of the job which include bending, lifting heavy equipment and working in tight spaces

License/Certification:

• 433A

#INDsc

#PFCsc

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates don’t need standard educational qualifications
Experience: Candidates should have a minimum of 2 years’ experience operating production-related equipment

Physical Requirements:

• The candidates should be able to lift weights in excess of 50 lbs
• The candidates should provide a congenial rapport with internal/external contacts
• The candidates should be able to work in a cold environment (up to -30F)

Other Requirements:

• The candidates should be a current licensed Industrial Millwright Mechanic in the Province of Ontario
• The candidates should have obtained an apprenticeship in Ontario
• The candidates should be willing/able to achieve a “B” Class Refrigeration Operator’s License as defined by the TSSA (Technical Standards and Safety Authority) in the Province of Ontario within 24 months of filling the position
• The candidates should possess strong technical and mechanical troubleshooting skills
• The candidates should possess good communication skills both verbal and written
• The candidates should have knowledge of computer systems such as PMC, Excel, Word, and SAP Maintenance
• The candidates should have a satisfactory work, safety, and attendance record

Responsibilities:

• The candidates should be able to troubleshoot and perform corrective maintenance on all plant equipment
• The candidates should be able to perform preventive maintenance rebuilds and modifications as required on all equipment
• The candidates should be able to perform facilities maintenance
• The candidates should be able to identify potential problems throughout the facility and bring proactive solutions to the Maintenance Supervisor (or his/her designate)
• The candidates should be able to participate and contribute in the development, implementation, and on-going maintenance of all plant systems such as Quality, Health and Safety, CMMS, Environment
• The candidates should be able to operate plant refrigeration systems under the direction of the Chief Refrigeration Operator
• The candidates should be able to assist in the maintenance of plant refrigeration systems
• The candidates should be able to accurately complete all shift logs, safety training, and work orders
• The candidates should be able to perform other duties as assigned

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume) through the below-mentioned details.

Overview

The Maintenance Engineer role is based in Picton, ON and reports directly to the Maintenance

Manager. The Maintenance Engineer will work closely with other Maintenance Supervisors,

Maintenance Planners and a Reliability Engineer among others.

What you’ll get to do

• Ensuring continuous improvement of equipment OEE (% reliability and % rate performance) by means of (a) root-cause failure analyses of significant or chronic equipment failures and (b) development and use of reliability action plans based upon RCFAs and downtime analysis techniques.
• Ensuring the inspection program (knowledge of equipment condition) is being executed using proper techniques. Inspections in person.
• Participating in the capital improvement and replacement annual budget for the entire plant to meet goals and objectives for asset management. Reviewing and assisting in the engineering and installation of capital projects.
• Developing and refining the PM/PDM maintenance program. Coordinating all efforts with equipment custodians and maintenance management to ensure the program is properly approved and endorsed by both departments.
• Coordinating with planners and schedulers to ensure that correct PM/PDM inspections are scheduled and performed when due.
• Managing, controlling, and analyzing all data, records, and equipment histories to continually review and refine inspection frequencies.
• Developing solutions to repetitive equipment failures and process losses, implementing ways of reducing the need for maintenance, and ultimately eliminating the occurrences of failures.
• Establishing and managing lubrication program and oil analysis, ensuring all equipment is properly lubricated and oil analysis is performed on all critical equipment.
• Participating in approval of all new installations and major repairs, including those done by contractors, to ensure their maintainability and reliability.
• Complete all assigned work in compliance with federal, provincial and local regulatory requirements.
• Complete responsibilities while strictly adhering to all company safety policies and procedures, ensuring their compliance by others through actions, deeds, communications and any other means appropriate to maintain the safety and health of all employees.
• Supporting plant environmental programs and requirements with engineering solutions and day-to-day maintenance activities.
• Participation in on-call rotation within the maintenance department
• Engaging hourly as well as salary co-workers in effort to build a sustainable core of practices, procedures and talent for the Picton Maintenance department

What We Are Looking For

• Candidate with Bachelor degree in technical field (engineering, science or equivalent)
• Good communication skills
• Detail oriented
• Organization skills
• Supervisory experience a plus
• Experience with Microsoft Project or similar
• CMMS experience, SAP preferred
• Action plans development and management
• Experience in plant operations and/or maintenance preferred

Work Environment

Role operates in a manufacturing environment with moving mechanical equipment, inclement weather, heat, humidity, elevated noise levels, and dusty conditions.

What We Have to Offer

• Competitive base salary
• Industry leading benefits package, including health, dental and wellness
• Retirement plan with matching contributions and RRSP options
• Opportunities for training, development and career growth within a global operation
• Heidelberg Materials is a drug free workplace.

Employer Statement: Heidelberg Materials welcomes and encourages applications from people with disabilities. Accommodations may be available upon request for candidates taking part in all aspects of the selection process.

The General Repair Technician II is a mid entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility components (i.e. walls, floors, etc.). The Technician II is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility technical and non-technical component monitoring and inspection.
• Responds to routine service requests and performs preventative and corrective maintenance.
• Operates facility mechanical, electrical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.

Administration

• Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

KNOWLEDGE & SKILLS

• High school diploma or equivalent
• Minimum 3 years of facility operations and maintenance work experience
• Knowledge of processes and practices relating to facility operations and maintenance
• Ability to maintain, troubleshoot and repair non-technical facility components
• Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair
• Ability to research, learn, and gain greater proficiency in applying on-the-job—fire, life, and building codes and standards
• Possesses a strong environment, health and safety mindset. Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Basic knowledge and understanding of Building Automation Systems (BAS)
• Ability to read understand and interpret technical drawings and information
• Self-motivated
• Computer literacy
• Demonstrated maintenance and repair skills
• Must be able and willing to work shifts, be available for on-call/stand-by and emergency call outs as they arise
• Must be willing to wear personal protective equipment
• Must meet enhanced security clearance requirements
• Valid drivers’ license

Licenses and/or professional accreditation 

• Demonstrate an interest in obtaining a diploma or a certificate, or be in the process of obtaining one.
• Meet the requirements for a higher security clearance.
• Any one of the following are considered an asset:
  • Building Operator Certification or equivalent through an accredited institution preferred
  • Building Systems Maintenance Certificate (SMC)
  • Systems Maintenance Administrator (SMA)
  • Systems Maintenance Technician (SMT)
  • Facilities Technician Certification
  • Working towards a trade license, an asset
  • Working towards Building Environment Systems (BES) Operation Class 1