All jobs within 100 km around Saint-Eustache in Maintenance & Repair

The Building Maintenance Technician III is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance with established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems.
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
• Operates facility mechanical and other systems.
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements.
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements. 
• Maintains all assigned tools and arranges for repair and replacement where required.
• Submits all expenditures on a timely basis.
• Other duties as assigned.

EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems.
• Sound knowledge of processes and practices relating to facility operations and maintenance.
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment.
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency.
• Knowledge and understanding of Building Automation Systems (BAS).
• Knowledge and understanding of HVAC Systems.
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification.
• Mentoring skills required to support lower-level technician’s development.
• Must be able and willing to work shifts, be available for on-call/standby and emergency callouts as they arise.
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE).
• Must be capable of obtaining appropriate security clearance.
• Hold a valid driver's license.

Licenses and/or Professional Accreditation (one of the following bullet points - asset)

• Building Operator Certification or equivalent through an accredited institution required.
• Provincial HVAC or apprentice license (ex: Gasfitter I & II license refrigeration license, etc.).

This position maintains a diverse range of equipment including delivery vehicles, heavy duty machinery, on road tractors, and trailers from a variety of manufacturers. This position troubleshoots and maintains/repairs various systems including hydraulic brakes, air brakes, electronics, and engines. This position performs other tasks as requested.

• Job Type: Full-Time - Permanent Position
• Work Location:  Lachine
• Workdays: Monday to Friday
• Shift duration: 7:00 pm – 3:30 am 

Responsibilities:

• Repairs all UPS package cars and equipment.
• Maintain a clean and organized workspace
• Use diagnostic tools and software to identify mechanical problems
• Ensures all vehicles are maintained regularly and in a timely manner
• Communicate effectively in a team work environment
• Performs routine PMI (Preventive Maintenance Inspection) and Maintenance repairs.

Qualifications and or Requirements:

• Bilingual
• Ability to lift 70 lbs./32 kgs.
• Valid driver's license and clean driving record (Required)
• Must be able to work Monday - Friday (7:00 pm – 3:30 am) (require)
• Strong knowledge of mechanical, electrical and electronic components of vehicles
• Excellent problem-solving skills and attention to detail
• Ability to work in a fast-paced warehouse environment and occasionally outdoors
• Possession of essential hand tools. Such as pneumatic tools and more.(required)
• must possess of a PEP card heavy duty or light duty mechanic license. (required)
• Must be able to Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday 
• Able to pass a Safety Road Test

Compensation and Benefits:

• $31* per hour
• Unionized role with a Defined Benefit (DB) pension plan
• Weekly pay (paid every Friday).
• Paid vacation: 2 weeks on start of service year, 3 weeks after 5 years of service, 4 weeks after 10 years of service, 5 weeks after 20 years of service, 6 weeks after 25 years of service
• Group Benefits (Dental and Extended Medical)
• Defined Benefit Pension Plan
• Immediate access to UPS Employee Discount Program upon hire.
• EAP (Employee Assistance Program)
• Opportunities for future growth within a Fortune 50 company.

Working Conditions:

• Mainly indoors (in a warehouse or shop). Occasionally work outdoors.
• Exposed to hot/cold and variable temperatures when working both indoors and outdoors.
• Wear a UPS Auto Mechanic uniform and adhere to the company’s Appearance Guidelines.

To-do list

Training-Skills and experience required

• B.SC. or DEC in mechanical engineering or related discipline;
• 10 years of experience in maintenance supervision;
• Knowledge of Microsoft Office;
• Experience with maintenance management software;
• Technical analysis and planning skills;
• Good vision of the continuous improvement process;
• Ability to make decisions and solve problems;
• People management skills;
• Ability to react quickly in crisis situations;
• Attention to detail;
• Excellent communication and interpersonal skills;
• Bilingual: French and English (oral and written). English is required to communicate with suppliers and colleagues located outside Quebec. 

We thank all applicants for their interest in exploring employment opportunities with Maple Leaf Foods, however, only those selected for an interview will be contacted. Applicants may be subject to a background check and must meet security requirements for the position.

To-do list

Training-Skills and experience required

• B.SC. or DEC in mechanical engineering or related discipline;
• 10 years of experience in maintenance supervision;
• Knowledge of Microsoft Office;
• Experience with maintenance management software;
• Technical analysis and planning skills;
• Good vision of the continuous improvement process;
• Ability to make decisions and solve problems;
• People management skills;
• Ability to react quickly in crisis situations;
• Attention to detail;
• Excellent communication and interpersonal skills;
• Bilingual: French and English (oral and written).

Requirements:

Languages: Candidates must have knowledge of the English or French Language
Education: Candidates don’t need standard educational qualifications
Experience: Candidates don’t need experience although having experience is an asset

Physical Requirements:

• The candidates should be able to work in a fast-paced environment with attention to detail.
• The candidates should be able to stand for extended periods

Other Requirements:

• The candidate should be accurate, client focus, dependable, flexible, and be able to work as a team player

Responsibilities:

• The candidates should be able to adjust, repair or replace parts and components of commercial transport truck systems
• The candidates should be able to adjust, repair or replace parts and components of automotive systems
• The candidates should be able to adjust, repair or replace parts and components of truck-trailer systems
• The candidates should be able to diagnose faults and malfunctions and confirm findings with supervisor to determine whether to repair or replace unit
• The candidates should be able to repair or replace mechanical units or components, test and adjust repaired systems to manufacturer’s specifications, test and adjust units to specifications
• The candidates should be able to perform scheduled maintenance service
• The candidates should be able to complete reports to record problems and work performed, review work orders and discuss work with supervisor

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
info@optikauto.com

Hourly wage: $28.50/hr

Hours per week: Between 40 and 60

Benefits after 3 months

Responsibilities

Reporting to the Operations Director, the Mechanic is responsible for the operations of this position, maintaining machinery, equipment and vehicles functional. His role is to perform the installation, maintenance and repairs, both electrical, mechanical, pneumatic and hydraulic, of the equipment and vehicles used at work. Do what is necessary to keep the garage clean and tidy at all times. The Mechanic performs all of the following functions;

• Ensures the optimal operational maintenance of all equipment and vehicles;
• Performs preventive maintenance on equipment according to established schedule. Performs various troubleshooting, repair and manufacturing tasks on equipment;
• Participates in equipment adjustments. Performs repairs written on work sheets left by drivers;
• Works from maintenance or manufacturing schedules, detailed drawings, sketches, specifications, manuals, or verbal and written instructions;
• Mechanically assembles machinery. Recommends possible modifications to equipment;
• Perform periodic maintenance operations such as oil changes, lubrication, brakes, tire rotations, etc.
• Organize your work according to requests and the availability of equipment to be repaired
• See to ordering the parts required for manufacturing and repairs as needed;
• Be aware of and work in accordance with current safety standards and regulations;
• May be called upon to train and provide coaching when required;
• Actively participates in improving the department's productivity, improving products and working methods.

SKILLS

Education and experience:

• DEP in heavy vehicle mechanics or other relevant training and experience;
• Mechanics: 1 year (Desired)

Competence profile:

• A minimum welding skill is required, any additional certifications or qualifications will be considered an asset;
• Any electrical knowledge will be considered an asset;
• Ability to work at heights, in confined spaces, and outdoors regardless of changing seasonal conditions;
• Must be able to work overtime when required;
• Know how to drive heavy manual trucks. Having a class 1 or 3 is an asset
• Must be available to be on call in the evenings and weekends on a rotating basis.
• English not required

Thank you for your interest. Only selected candidates will be contacted for an interview. Lafarge is committed to employment equity and encourages applications from women, visible minorities and persons with disabilities.

Requirements:

Languages: Candidates must have knowledge of the English or French Language
Education: Candidates don’t need standard educational qualifications
Experience: Candidates don’t need experience although having experience is an asset

Shifts: Day, Shift, Overtime, Early Morning, Morning
Transportation information: The candidates should have a valid driver’s license

Physical Requirements:

• The candidates should be able to work in a fast-paced environment with attention to detail.
• The candidates should be able to stand for extended periods

Other Requirements:

• The candidate should be accurate, client focus, dependable, flexible, and be able to work as a team player

Responsibilities:

• • The candidates should be able to adjust, repair or replace parts and components of commercial transport truck systems

• The candidates should be able to adjust, repair or replace parts and components of automotive systems
• The candidates should be able to adjust, repair or replace parts and components of truck-trailer systems
• The candidates should be able to diagnose faults and malfunctions and confirm findings with supervisor to determine whether to repair or replace unit
• The candidates should be able to repair or replace mechanical units or components, test and adjust repaired systems to manufacturer’s specifications, test and adjust units to specifications
• The candidates should be able to perform scheduled maintenance service
• The candidates should be able to complete reports to record problems and work performed, review work orders and discuss work with supervisor

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
info@optikauto.com

Air Canada is presently looking for a dynamic individual to fill a permanent full-time position as of a Facility Maintenance Mechanic at Montreal Dorval.

Description: 

• Perform preventative maintenance & servicing to Building related mechanical equipment.
• Investigate and troubleshoot faulty Hangar Doors, Overhead doors, fire doors, etc.
• Ability to install, maintain, repair, dismantle, and reassemble machinery.
• Ability to use welding equipment, hand, and power tools as necessary.
• Perform minor repairs including replacement of gearboxes, sprockets, chains, door
  panels
• Perform visual inspections of buildings to maintain Building Code standards.
• Ability to do repair and maintenance on HVAC unit.
• Ensure all work is completed in a safe manner and complies with applicable industry
  standards.
• Performing other facility related duties as requested.
• Team oriented individual with demonstrated ability to work unsupervised and self
  directed.
• Able to work under pressure.
• Able to work shifts, including weekends & participate in on-call rotation.

Your benefits

As one of the leading employers in Canada, we like to ensure our employees are well rewarded with a range of benefits including:

• Air Canada staff love to travel and we have one of the most generous employee travel programs in the industry. You will be eligible for travel privileges for yourself and other eligible persons once you’ve completed twenty-eight (28) weeks of service.
• We value your wellbeing which is why we offer a wide variety of benefit plans, including health and dental, for you and your family.
• Training and development tools to help unlock your full potential.

Qualifications

• Must posses valid Driver’s licence with clean abstract
• Must posses an Interprovincial Journeyman Millwright license or Red Seal
• Must posses a Tag1 Gas license, Halocarbure Gas license and Refrigeration license CCQ. 
• Minimum 3 years field experience.
• Knowledge of building mechanics, Hangar door systems, control systems, BMS system (Trane/Siemens), Mechanical system operation, MIG welding, CMMS
• Candidate must have excellent written and oral communication skills and be detailed oriented.
• Basic computer knowledge (Word, Excel, e-mail and internet).
• Employees in this role, conduct safety-critical work and as such, Air Canada medical standards must be met in order to qualify for the role. Candidates will be subject to a medical evaluation, including a drug and alcohol test and are expected to be free of any intoxicating substances.
• Candidates must be eligible to work in the country of interest, at the time any offer of employment is made and seeking any required work permits/visas or other authorizations which may be required is the sole responsibility of the candidates applying for this position.
• Must be able to obtain and maintain any applicable transportation security clearances and additional authorizations depending on the work location. Please refer to TransportCanada site for more details.
• 5th Class Power Engineer ticket required as part of the probation

Linguistic Requirements:

Based on equal qualifications, preference will be given to bilingual candidates.

The Maintenance Technician III supports the FedEx industrial maintenance of material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial maintenance related systems. May troubleshoot component and systems issues.

• Location: 2000 Chemin Saint François, DORVAL, QC H9P 1K2, Canada

ESSENTIAL FUNCTIONS

• Under minimal supervision, provides preventative and predictive maintenance, troubleshooting and repair of material handling systems through demonstrated proficiency in mechanical power transmission and electrical with working knowledge of PLC/controls and welding/fabrication
• Adheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concerns
• Will interpret electrical or mechanical schematics, manufacturer’s manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalation
• Responds to sort calls to diagnose problems and make repairs
• Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data
• Complex skills required in diagnosing and troubleshooting mechanical, electrical and/or PLC/controls failures
• May rely on higher level Technicians in complex control systems issues
• May begin to read PLC and have the ability to burn EEPROMs
• May begin to assist lower level technicians
• May begin to develop scopes of work and project plans for small scale projects to be executed at a local level
• May be required to work a flexible schedule including all days and shifts as the business need dictates.
• Performs other duties as assigned

Examples of what you can expect to learn in the Tech III level (does not include all areas/responsibilities).

Mechanical

• Understand power transmission concepts, such as gear ratios, service factor, horsepower and frame size to repair/replace a failed gearbox and/or motor when the correct replacement parts are not available
• Understand mechanical design concepts to be able to replace failed pulleys and bearings with replacements that don’t match design without impacting performance of a conveyor (speed, torque, etc.)
• Can read, interpret and create or modify mechanical drawings

Electrical

• Use a digital multimeter to resistance test de-energized circuits.
• Troubleshoot and diagnose both the power and the control branch of motor controls circuits.
• Read, interpret and create or modify electrical drawings/schematics

PLC/Controls

• Go online with PLC processors to aid in troubleshooting
• Burn EEPROMs
• Understand PLC networks, such as ControlNet, DeviceNet, etc.

Welding or Fabrication

• MIG, stick and TIG weld in all positions.
• Understand difference between structural and non-structural welds and when to apply them
• Repair broken components where factors such as position or load may impact the repair, such as motor mounting plates or conveyor legs.
• Use vertical mill/drill and other machining tools

MINIMUM EDUCATION

• High School Diploma or GED required
• Certificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred.

MINIMUM EXPERIENCE

• Four (4) years experience in Industrial Maintenance with proficiency in knowledge and demonstrated skills in mechanical power transmission, electrical and working knowledge of PLC/Controls and welding/fabrication skills through job experience, related military experience and/or related education required.
• Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experience

KNOWLEDGE, SKILLS AND ABILITIES

• Ability to follow procedures as directed by work orders or high-level technicians/management
• Ability to interpret electrical or mechanical schematics, manufacturer’s manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalation
• Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data
• Ability to solve mechanical or electrical problems, which may include understanding of engineering formulas
• Ability to diagnose mechanical power transmission, electrical or PLC/controls issues by troubleshooting at multiple component and system level
• Effective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needs
• Need to collaborate successfully with department, operations, vendors and support teams that failures or projects may require
• Software skills, including Microsoft Office suite and other web-based applications

• Possess time management and organizational skills

JOB CONDITIONS

• Will need to use hand tools and possibly power tools
• May be working in hot or cold temperatures
• May need to stand, walk, bend, stoop and squat

Preferred Qualifications:Must be bilingual. Must be available from Monday to Friday from 8:00 AM to 4:30 PM and on call. 3 months term. Full -time temporary position. Must be available weekends during peak periods.

Additional Details:Maintenance Technician III (63,648 up to 79,612)

Air Canada is presently looking for a dynamic individual to fill a permanent full-time position as of a Facility Maintenance Mechanic at Montreal Dorval.

Description: 

• Perform preventative maintenance & servicing to Building related mechanical equipment.
• Investigate and troubleshoot faulty Hangar Doors, Overhead doors, fire doors, etc.
• Ability to install, maintain, repair, dismantle, and reassemble machinery.
• Ability to use welding equipment, hand, and power tools as necessary.
• Perform minor repairs including replacement of gearboxes, sprockets, chains, door
  panels
• Perform visual inspections of buildings to maintain Building Code standards.
• Ability to do repair and maintenance on HVAC unit.
• Ensure all work is completed in a safe manner and complies with applicable industry
  standards.
• Performing other facility related duties as requested.
• Team oriented individual with demonstrated ability to work unsupervised and self
  directed.
• Able to work under pressure.
• Able to work shifts, including weekends & participate in on-call rotation.

Your benefits

As one of the leading employers in Canada, we like to ensure our employees are well rewarded with a range of benefits including:

• Air Canada staff love to travel and we have one of the most generous employee travel programs in the industry. You will be eligible for travel privileges for yourself and other eligible persons once you’ve completed twenty-eight (28) weeks of service.
• We value your wellbeing which is why we offer a wide variety of benefit plans, including health and dental, for you and your family.
• Training and development tools to help unlock your full potential.

Qualifications

• Must posses valid Driver’s licence with clean abstract
• Must posses an Interprovincial Journeyman Millwright license or Red Seal
• Must posses a Tag1 Gas license, Halocarbure Gas license and Refrigeration license CCQ. 
• Minimum 3 years field experience.
• Knowledge of building mechanics, Hangar door systems, control systems, BMS system (Trane/Siemens), Mechanical system operation, MIG welding, CMMS
• Candidate must have excellent written and oral communication skills and be detailed oriented.
• Basic computer knowledge (Word, Excel, e-mail and internet).
• Employees in this role, conduct safety-critical work and as such, Air Canada medical standards must be met in order to qualify for the role. Candidates will be subject to a medical evaluation, including a drug and alcohol test and are expected to be free of any intoxicating substances.
• Candidates must be eligible to work in the country of interest, at the time any offer of employment is made and seeking any required work permits/visas or other authorizations which may be required is the sole responsibility of the candidates applying for this position.
• Must be able to obtain and maintain any applicable transportation security clearances and additional authorizations depending on the work location. Please refer to TransportCanada site for more details.
• 5th Class Power Engineer ticket required as part of the probation

Linguistic Requirements:

Based on equal qualifications, preference will be given to bilingual candidates.