All jobs within 300 km around North Perth in Maintenance & Repair

VCT Group requires a Master Electrician to lead the solar installation team. This individual will use extensive knowledge of electrical installation methods to ensure project are designed and built in accordance with electrical codes and internal best practises. In this role you will oversee all electrical work of electricians, designers and apprentices. This position involves working out of our Kitchener location under the direction of the Operations Manager. Come make an impact in our organization to support the future of electrification and renewable energy.

SPECIFIC RESPONSIBILITIES INCLUDE:

• Review and sign off on electrical related work including single line diagrams, electrical layouts, site plans to ensure the highest quality is met in compliance with electrical code

• Assisting in site visits with business development team for feasibility of future projects, providing recommendations on materials, layouts,e tc.

• Read and interpret drawings, circuit diagrams and electrical code specifications to determine wiring layouts for new or existing installations.

• Inspection of electrical components including transformers, electronics, and other equipment

• Commissioning and configuration of electronics control and monitoring systems

• Troubleshoot and diagnose failed electronics components using a variety of testing devices

• Supervise, educate, and train apprentices

• Uphold VCT Group’s standards of quality and professionalism

• REQUIRED QUALIFICATIONS:

• Licensed Master Electrician

• 2+ years licensed experience

• Demonstrated attention to detail, customer care, and quality of work

• Excellent verbal and written communication skills

• Highly efficient use of computer applications including databases, Zoom, CRM platforms, project management software, and other MS Office applications

• Current G class driver’s license and clean drivers abstract

ADITIONAL SKILLS, ABILITIES, AND QUALIFICATIONS THAT WOULD BE AN ASSET:

• Experience with installing and servicing electric vehicle chargers, batteries, and energy storage systems

• Experience with electrical service upgrades and installations

• Experience working in residential and ICI sectors

• Experience with solar PV installations

• Experience with computer networking, IP, wifi, and cellular data communications

• Forklift, first aid/CPR, and working at heights certification

YOU’LL LIKELY BE A PRETTY GOOD FIT IF SOME OF THE FOLLOWING DESCRIBES YOU:

• You’re a bit of a perfectionist, in a healthy way, you value precision and accuracy

• You’re an innovator and inventor, you can’t stop yourself from critically evaluating

everything you see, from a position of curiosity rather than arrogance, thinking of ways it can be done better

• Without being arrogant or boastful, you are actually quite inwardly competitive and like to feel accomplished

• You already own an electric vehicle, or can hardly wait to get one, and are keenly aware of your environmental footprint.

• You get a great deal of satisfaction when you stand back at the end of a project and look at what you just built with pride.

Interested candidates should forward their resume and cover letter to hr@vctgroup.com. We would like to thank all candidates for their interest, however, only those potentially suitable for the position will be contacted. Please refer to the job position for which you are applying in the subject line of all correspondence.

Group Summary:

QUALIFICATIONS:

• Graduate of Electrical or Mechanical Engineering Technology (Robot and Automation Program) and/or Provincial Electricians Ticket (442A or 309A) or equivalent
• 5+ Years of Automation Technician experience
• Previous experience with automated paint, production and process equipment preferred
• Must have strong computer skills in MS Office (Word, Excel, PowerPoint, Access, Project)
• Strong knowledge of PLCs (Allen Bradley, Siemens)
• Strong Knowledge of Robotics (ABB, Fanuc, Motoman)
• Strong knowledge of HMI programming (FTV, View, RSView32)
• Strong knowledge of various networks (Ethernet/IP, DH+, RIO, DeviceNet, ControlNet, Modbus2, RS232)
• Able to interpret and design electrical schematics
• Excellent problem solving, judgement and decision-making skills
• Proven ability to work in a team environment and lead problem-solving teams
• Must have a strong awareness of safety and proven safety record
• Must have demonstrated good work habits for a period of not less than six months in present job

MAIN DUTIES:

• PLC, robot and HMI programming, implementation and troubleshooting
• Preventative maintenance of production and support equipment
• Repair of equipment
• Design, verification and maintenance of electrical schematics
• Assist in setting up, maintaining programming, electrical components and schematic standards
• Assist in proper maintenance of all programming software, application files and programming hardware
• Completion of all required work orders and associated paperwork
• Responsible to improve equipment reliability and uptime related to automation and controls
• Implementation of Continuous Improvement Ideas related to automation and robotics as assigned
• Other duties as assigned

Awareness, Unity, Empowerment:

Regular / Permanent

Magna Exteriors

The Clerk - Maintenance position is responsible for sourcing various suppliers for products and services required and purchase various items and supplies for Maintenance Department. In addition, keep stock and inventory control of maintenance supplies and coordinate sub-contractors.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

• Issue parts, records withdrawal and up-date Computerized Maintenance Management System.
• Monitor inventory level, critical parts and inform/up-date Maintenance buyer for replenishment as the need arises.
• Enter data from completed Breakdown work orders, Preventive and Predictive maintenance work orders to CMMS.
• Monitor and prepare packing slips for all parts borrowed and parts going out for repair.
• Keep track of all machine and machine numbers and up-date machine master file.
• Prepare report, charts, summary of maintenance activities, downtime histories, etc.
• Enter parts from log out sheets and maintain inventory control on parts stock.
• Some janitorial duties (garbage removal, snow shoveling, minor maintenance tasks).
• Ability to read lists of products, stock numbers, quantities and prices.
• Interact with maintenance staff to take on various tasks.
• Estimate by sight number of tools needed when necessary to reorder supplies, and use graphs to compare performance data over a period of time.

Credentials
 

• High School Diploma or equivalent general education.
• Minimum two years experience in a technical field.
• Ability to read and understand blueprints and the ability to follow written welding procedures.
• Ability to use computer applications such as Microsoft Word, Excel, and Outlook.

Desired Characteristics
 

• Demonstrate strong inventory control and stock keeping capabilities to ensure that supplies are readily available.
• Ability to work independently and in a team with other personnel to demonstrate support and ensure tools and materials are available for production.
• Keep up to date on changes in computer technology and with changes in different tools and materials used for production.

 
What Linamar Has To Offer
 

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

The Level 1 – Maintenance Labourer position, under the supervision and direction of the Maintenance Supervisor assist Millwrights and Maintenance Mechanics in day to day maintenance activities.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Maintain systems to track, report, document and assist with scheduled preventative maintenance.

· Record coolant refractometer readings, top up machine oils, and record usage.

· Manage oil and coolant inventories.

· Housekeeping of storage area for fluids.

· Operate forklift and floor scrubber.

· Maintain equipment in a safe and clean manner.

· Ability to use CMMS (computerized maintenance and manufacturing system).

· Ensure compliance of maintenance instruction sheets and procedures.

· Attend maintenance daily meeting.

· Measure various physical properties using common measuring tools such as rulers, tapes, thermometers and scales.

· Evaluate condition of parts and equipment.

· Assess the safety of work environments.

Credentials

· High School Diploma or equivalent general education.

· Minimum one year experience in manufacturing.

· Able to observe warning signs, such as scan phrases and icons on caution and warning signs to identify hazards in work areas.

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

Desired Characteristics

· Perform tasks independently under direct supervision.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Preventative Maintenance Coordinator will act as the primary liaison person between maintenance and operations, while developing, coordinating, and monitoring preventative maintenance programs for the facility. Assist with the training of maintenance employees on the proper technique of preventative maintenance tasks and the importance of the program.

Performance Expectations

• Prepare preventative maintenance plans / instructions and schedules that are in sync with the organization’s maintenance goals and production requirements.
• Work order completion percentage ratio and PM recovery plan development.
• Assist with scheduling person power for regular PM activities.
• Coordinate planned downtimes to maximize MTBF and minimize MTTR and minimize interference with production schedules. 
• Estimate labour hours, tools, and resources needed to complete different work orders.
• Help with keeping an optimal stock of spare parts and materials required for PM in conjunction with the maintenance buyer.
• Prepare and ensure compliance with preventive maintenance checklists and other standardized procedures in the absence of the maintenance supervisor.
• Develop maintenance KPI’s in conjunction with the maintenance manager that show quantifiable values indicating effective and efficient progress towards achieving maintenance objectives.
• Tracking and trending data to develop departmental metrics on percentage of work order completion; benchmarking; overtime; planned maintenance completed on time.
• Tracking deferred maintenance plans and development to reduce the backlog.
• Assist in planning of annual major shutdown activities, and weekend work as needed when production operations are not running and repairs or PM’s / TPM’s must be executed.

Credentials

Millwright 433A License Required or equivalent knowledge and experience.

Desired Characteristics

Maintenance Software Knowledge (IFS an asset).

Establish/Adjust work schedules, and shift priorities.

Work order management data analysis and work efficiency.

Ability to use computer applications such as Microsoft Word, Excel, Outlook, and applicable maintenance software.

Strong mechanical skills.

What Linamar Has To Offer

·       Competitive Compensation

·       Employee Benefits package includes but not limited to, Drug, Dental & Vision etc.

·       Opportunities for career advancement.

·       Sustainability Counsel

·       Community based outreach supporting both local and global initiatives and charities.

·       Discounts for local vendors and events, including auto supplier discounts.

The Electrician position, under limited direction, installs, maintains, test, troubleshoots and repairs industrial electrical equipment and associated electrical and electronic controls. Primarily accountable for interpreting architectural drawings and electrical code specifications and form and test electrical circuits to ensure health and safety regulations. In addition, assure proper functioning and illumination of electrical equipment and work on equipment such as electrical transmission lines, motors, generators, distribution and plant equipment.

Powering Vehicles, Motion, Work and Lives since 1966.

Performance Expectations

· Oversee inspections of electrical systems to ensure compliance with Ontario Electrical Standards Act.

· Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, feeders, fibre-optic and coaxial cable assemblies, lighting fixtures and other electrical components as needed.

· Test electrical and electronic equipment and components for continuity, current, voltage and resistance.

· Update and log electrical changes.

· Maintain needed spares and purchase material in the most cost effective manner.

· Evaluate power for new equipment and connect to the Ontario Electrical Code.

· Complete interface to CNC equipment.

· Coordinate with all plant services and contractors as needed.

· Train and direct electrical employees and ensure they perform to required standards.

· Interpret information from pre-maintenance work orders to determine the location and appropriate work necessary.

· Take measurements using high voltage testing equipment.

Credentials

· Able to read and interpret drawings, blueprints, schematics and electrical code specifications.

· Technical school training and has completed the apprenticeship program.

· Licensed electrician (309A).

· Minimum two years of previous related experience.

· Able to read schematic drawings in order to troubleshoot and repair equipment.

· Ability to troubleshoot and determine resolutions when encountering malfunctions in equipment.

· Knowledge of phone systems, network cabling, security systems, door access systems and video surveillance systems is an asset.

· Able to work rotating shifts and weekend work, as needed.

· Travel may be required between Guelph facilities.

Desired Characteristics

· Ability to work independently, in addition, work as part of a team that includes other tradespeople and professionals to install, repair and maintain electrical systems and equipment.

· Receive in-house safety training to update certifications such as Workplace Hazardous Materials Information System (WHMIS), Transportation of Dangerous Goods (TDG), First Aid and Cardio Pulmonary Resuscitation (CPR).

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Level 1 – Maintenance Labourer position, under the supervision and direction of the Maintenance Supervisor assist Millwrights and Maintenance Mechanics in day to day maintenance activities.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Maintain systems to track, report, document and assist with scheduled preventative maintenance.

· Record coolant refractometer readings, top up machine oils, and record usage.

· Manage oil and coolant inventories.

· Housekeeping of storage area for fluids.

· Operate forklift and floor scrubber.

· Maintain equipment in a safe and clean manner.

· Ability to use CMMS (computerized maintenance and manufacturing system).

· Ensure compliance of maintenance instruction sheets and procedures.

· Attend maintenance daily meeting.

· Measure various physical properties using common measuring tools such as rulers, tapes, thermometers and scales.

· Evaluate condition of parts and equipment.

· Assess the safety of work environments.

Credentials

· High School Diploma or equivalent general education.

· Minimum one year experience in manufacturing.

· Able to observe warning signs, such as scan phrases and icons on caution and warning signs to identify hazards in work areas.

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

Desired Characteristics

· Perform tasks independently under direct supervision.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts

Working on the line you will machine parts and perform quality checks in a timely manner. These positions require shift work and the ability to work overtime.
 
Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

Requirements
 

• Previous Manufacturing experience is an asset
• Ability to work all rotating shifts
• Ability to work overtime as required
• Must be willing to learn
• Work independently and as part of a team
• Must be 16 years of age to work on the shop floor

Why Linamar
 
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

Working on the line you will machine parts and perform quality checks in a timely manner. These positions require shift work and the ability to work overtime.
 
Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

Requirements
 

• Previous Manufacturing experience is an asset
• Ability to work all rotating shifts
• Ability to work overtime as required
• Must be willing to learn
• Work independently and as part of a team
• Must be 16 years of age to work on the shop floor

Why Linamar
 
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

285 Massey Road, Guelph, Ontario, N1K 1B2, CA

The Level 4 – Maintenance Multi Skilled is responsible for maintaining, troubleshooting and repairing a variety of mechanical, electrical, and electronic systems within an industrial environment.

Responsibility

·         Diagnose and repair mechanical, electrical, pneumatic and hydraulic issues of the production equipment to minimize downtime.

·         Perform predictive and preventative maintenance on machinery and equipment according to established schedules.

·         Assist in the installation and commissioning of new equipment, ensure all systems are properly integrated and functional.

·         Repair and replace defective parts, such as bearings, gears, belts and motors.

·         Conduct precision alignments and adjustments on machinery.

·         Execute mechanical rebuilds of the machinery and components.

·         Troubleshoot, repair and replace PLCs (Allen Bradley PLC, Fanuc / Siemens CNC controls)and other PC-based systems

·         Identify opportunities for process improvements to enhance equipment efficiency and reliability.

·         Read and interpret drawings, blueprints and schematics.

·          Close work orders using maintenance tracking system.

Academic/Educational Requirements

·         High school diploma or qualification.

Certificate of Qualification for both Industrial Electrician 442A and Industrial Mechanic Millwright 433A.

Required Skills/Experience

·         Fully capable of Level 3 – Maintenance Fully Skilled and Electrician responsibilities.

·         Minimum of 2-years of experience in manufacturing environment.

Working Conditions

40 hours per week

Shift work (Rotation/ Straight/ continental)

Maintenance and Production area as required.

Sunday to Saturday

Facility Specific

Ensure compliance with all legislative requirements in the facility’s geographic location including but not limited to:

·         ISO 45001: Health and Safety management system standard.

·         ISO 14001: Environmental Management system standard.

·         IATF 16949 Technical Specification Management

Ensure compliance with Linamar’s internal operating system known as ‘GOS’: The Global Operating System

Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors

Maintain department 5S requirements.