All jobs within 50 km around Ancaster in Engineering

Engineer – Manufacturing, Junior - 6 month contract

The Engineer – Manufacturing, Junior position will be responsible for working with production planning

to set shop priorities and ensure all tools and documentation necessary in the plant for production run

jobs are available.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Investigate and monitor new machinery and equipment and recommend or select efficient combinations.

· Conduct time studies to optimize cycle counts of existing processes.

· Assist in defining the plant layout and enhance ergonomic standards by establishing programs and conducting studies.

· Planning and executing of projects related to new and pre-existing production lines, improvements, upgrades, layouts, and new equipment related to machining or assembly.

· Attend Advanced Product Quality Planning (APQP).

· Recognize and resolve tooling related difficulties.

· Interface with suppliers of raw materials and tools.

· Investigate and find resolution of specific processing problems for assigned projects/parts.

· Conduct studies of the reliability and performance of plant facilities and productions or administrative systems.

· Develop and review all processes and operator instructions to endure accuracy and conformance to actual procedures; revise as needed.

· Participate in corrective action to meet ongoing cost, quality, and delivery.

· Direct development of process flows, process sheets, FMEA’s, and control plans.

· Ensure the process is capable of producing parts in print specifications.

· Recognize and resolve process related difficulties with current and future projects.

· Assist in the preparations of quotations

· Participate in Customer Focus Meetings

· Assist in training shop floor personnel in machine set-up, equipment operations, and best practices.

· Adhere to TS16949 and applicable customer standards.

· Ability to discuss daily production with plant operators and maintenance staff.

· Ability to evaluate the ability of current building systems to address increased demands from plant operations.

· Estimate durations of development, fabrication, construction, and repair tasks.

· Ability to select materials and equipment to use for projects and decide appropriate codes.

Credentials

· Post-Secondary Education in Engineering or related discipline.

· Licensing by a provincial or territorial association of Professional Engineers (P.Eng.) considered an asset.

· Minimum of one years of experience in a machining or manufacturing environment.

· Proficient with Microsoft Office and CAD applications.

· Ability to write comprehensive entries into technical log books.

· Experience with risk analysis and failure modes and effects analysis (FMEA).

· Ability to review scale drawings.

· Ability to take precise measurements using specialized equipment and techniques.

· Ability to coordinate and integrate work within teams of engineers and technicians to work on common projects.

Desired Characteristics

· Ability to work in a team setting environment for tasks such as creating scale drawings, preparing specifications, writing proposals and developing plant maintenance schedules.

· Possess excellent diagnostic skills.

· Excellent interpersonal skills in order to effectively communicate with suppliers, supervisors and managers.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Engineer - Process position will be responsible for determining the operations for fabrication and assembly of products by reviewing parts drawings, specifications, and other engineering data. Primarily accountable for planning, scheduling, conducting, or coordinating phases of major engineering projects in addition to developing sequence of operations, estimate time requirements for each, and prepare operation sheets.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

• Work with production planning to set shop priorities and ensure all necessary tools and documentation needed in the plant are available.
• Attend Advance Quality Planning meetings to finalize design of required fixtures and tooling.
• Interface with suppliers of raw material and tools to establish engineering requirements for start of production.
• Investigate and find resolution of specific processing problems for assigned projects and parts.
• Prepare quotations for new jobs, including material and processing costs, tooling, gauges and capital investment costs if required.
• Participate in productivity improvement investigations.
• Conduct time studies.
• Maintain ongoing process control through quality troubleshooting and process improvement investigation.
• Regular review of all processes and operator instructions for assigned customers to ensure accuracy and conformance to actual procedures.
• Collect data and develop statistics to describe equipment and system functionality.
• Estimate durations of development, fabrication, construction and repair tasks.
• Define which materials and equipment to use for projects and select appropriate codes.
• Complete work order and change work order forms to notify key parties about projects.
• Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Credentials

• Post-Secondary education in Engineering or Equivalent.
• Minimum three years of related experience.
• Knowledge/work experience in machine processes, cutting tools, fixtures, CNC and Special purpose machines.
• Working knowledge of ISO-TS16949 and ISO 14001, and with mechanical blueprint interpretation including GD and T.
• Good computer skills, including Word, Excel and Outlook.
• Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining (i.e. AutoCAD, CAD/CAM and SolidWorks).

Desired Characteristics

• Able to interact with supervisors or managers and integrate work within teams of engineers and technicians to work on common projects.
• Attend formal professional development seminars and conferences as needed.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

Reporting to the Engineering Manager, this role will provide support in resolving design related controls issues on current production design control systems and investigating a variety of new or tried and true technologies to create unique design solutions for existing or next generation Skyjack products.

This role is a 100% on-site located in Guelph, ON.

Performance Expectations

• Prepare vehicle system controls concept and design drawings include machine harness drawings, panel layouts, wiring diagrams and system schematics.
• Create supporting calculations ensuring that designs meet specification requirements including functional, safety, legal compliance, and manufacturing capabilities.
• Maintain thorough documentation for all aspects of assigned projects.
• Support cross-functional engineering teams to achieve project objectives and timelines.
• Coordinate design reviews with the team to evaluate different design proposals.
• Perform DFMEA on proposed solutions to identify potential failures early in the process and adjust planning accordingly
• Troubleshoot and resolve any design- related issues throughout development cycle.
• Prepare software requirement documents as required.
• Contact and interact with vendors, suppliers, and contractors to investigate technologies and their applications.
• Monitor the development of new technologies and upcoming suppliers.
• Build relationships with vendors, suppliers, and contractors to enable the development of new technologies.
• Design and test prototypes: employ data collection, analysis techniques, and optimization to achieve target performance.
• Provide support in checking details, assemblies, and BOMs for assigned projects.
• Apply a wide variety of established or modified engineering methods or techniques with considerable independence of action.
• Other duties as assigned.

Credentials

• Bachelor’s degree in Mechatronics, Electrical Engineering or C.E.T. in an Electrical discipline. 
• Currently registered as a Professional Engineer in Ontario or working towards achieving their designation.
• Minimum 2 years of experience as a Controls Engineer in a mobile/heavy equipment (or related) manufacturing environment is preferred.
• Practical experience and knowledge of custom microcontrollers, CAN bus communications, vehicle electrical connectors, solenoid valves and other mobile equipment electrical components is an asset.
• Demonstrated knowledge of general electrical skills.
• Ability to interpret, modify and generate electrical schematics
• Design experience with SolidWorks (with formal training preferred), experience with AutoCAD desirable.
• Exceptional problem solving, critical thinking skills and must be capable of thinking outside of the box.
• Exceptional research, hands on data collection, and data analysis skills.
• Demonstrated proficiency in troubleshooting and root-cause analysis.

Desired Characteristics

• Must be open to expanding their knowledge base into new fields.
• Strong organizational and leadership skills.
• Excellent communication skills with the ability to work well with a cross functional technical team as well as with manufacturing personnel.
• Exposure to hydraulic controls, hybrid or electric drive systems are assets.
• Ability to resolve complex issues in creative, efficient, and effective ways.

Why Linamar/Skyjack

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

Automation Technician, Junior

The Automation Technician, Junior position is responsible for working with the manufacturing engineer, project engineers, and program managers, set up personnel and maintenance departments to reduce costs and remove non-value added material from productions lines.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

• Work with program managers and project engineers at the APQP stage of a program start-up.
• Plan assigned work in an efficient method to minimize machine downtime while ensuring employee safety is maintained.
• Troubleshoot process automation problems.
• Perform regular housekeeping duties.
• Work within QS9000 procedures and requirements.
• Work with engineering following PPAP approval in resolving non-value added processes.
• Work in design stage of processes both for start-up and current production projects.
• Assign work tasks where applicable to co-worker(s).
• Ensure work is performed in a manner that minimizes downtime.
• Ensure all new and rebuild equipment has all features required by CSA, OSHA, and Electrical Safety Code.
• Perform root cause analysis failure.
• Perform periodically Plc and program backup.
• Maintain updated and controlled Plc program data base.
• Maintain equipment documentation updated.
• Participate in meetings with supervisors, co-workers and employees to plan upcoming activities and to update projects.
• Ability to schedule production activities for all phases of design, maintenance and inspection to meet the time requirements of contracts.

Credentials

• Completed three year program in Electrical or Mechanical Technology.
• Trade license in Industrial Electrical Maintenance (442A).
• Electronics Technician/Technologist Certificate, Electrician Qualification or equivalent.
• Certificate of Qualification or Certificate in a related field or equivalent working experience.
• Courses supplied by machine manufacturer.
• Minimum five years experience in CNC and robotic repair/ programming.
• Understanding of electrical / electronic schematic diagrams, blueprints and pneumatic/hydraulic systems.
• Ability to refer to quality specification forms to verify that products comply with required standards.
• Ability to evaluate condition of new and damaged mechanical equipment and make recommendations for repair or replacement.
• Ability to provide technical support and services to engineers.
• Knowledge of advanced PLC programming including Allan Bradley, ControlLogix/RS Logix, Siemens S7, Fanuc.
• Knowledge of robot systems (ABB, Motoman).
• Basic knowledge of computer networking, Ethernet connections, TCP/IP protocol.
• Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining.

Desired Characteristics

• Ability to work in teams that include engineers, machinists, and architects.
• Attend formal professional development seminars and conferences as needed.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

This position requires an individual with extensive experience in project management with the ability to multi-task in order to complete medium to large sized projects simultaneously.

Any MLF team member interested in being considered for this role are encouraged to apply online by August 08. Applications received beyond that date are not guaranteed consideration.

Snapshot of a Day-in-the-Life:

• Develop and manage (Capital) project plans, operations, budgets and schedules (annual and multi-year) and prepares CER's (Capital Expenditure Requests)
• Provide engineering support for the operations group
• Assist senior management in developing and justifying capital expenditure requests
• Investigate practical, cost-effective and innovative plant improvement solutions
• Utilize and incorporate Six Sigma and other project management tools, methodology and principles
• Negotiate contracts and supervise equipment vendors, service providers and contractors
• Actively participate in company initiatives; e.g. Innovation, Share groups, MyMLF, Energy Efficiency
• Manage and develop the capital plans of the Plant Manager, Production, Maintenance Managers, Engineering and all other functions to achieve low cost producer status.
• Supervise contractors when on site.
• Create project budget based on agreed scope.
• Form and manage project schedules.
• Utilize project management tools
• Other responsibilities as required

What You’ll Bring:

The successful candidate will be results-oriented, thrive in a fast paced, demanding environment, and have the ability to develop positive working relationships with all employees. Candidates must have:

• 5 years experience as an engineer or Mechanical/Electrical Technologist, or 10 plus years of equivalent project experience.
• Proven track record of handling multiple medium to large sized projects.
• Team player with effective leadership, interpersonal and communication skills.
• Strong organizational, analytical and planning abilities combined with practical business sense.
• Strong computer skills (Microsoft Office and Project Management software).
• Working knowledge of industry codes and regulations e.g. OH&S, WHMIS, HACCP.
• Knowledge and experience with Food industry would be an asset

What We Offer at Maple Leaf Foods:

• Being part of a high-performance, people-focused company that has an inspiring and unique vision to become the most sustainable protein company on earth, and a deep commitment to sustainable protein across North America.
• An inclusive company culture and a work environment that keeps our people safe, rewards excellence, and empowers everyone to learn and contribute their best.
• Competitive Health and Wellness benefits that offer flexibility to meet your individual or family needs, including programs focused on improving mental health and wellbeing. These benefits start on your first day of employment.
• Defined Contribution Pension Plan with company matching that starts on your first day of employment.
• Learning and development opportunities, including workshops, ‘speaker series’ events, and resources that allow you to develop your skills and progress your career.
• Comprehensive tuition reimbursement program that supports continuous learning and development of our team members through investment in eligible degrees, diplomas, professional certification, or trades programs.
• Supporting our deep commitment to community impact, we offer up to two paid days annually to volunteer at a cause of your choice.This position requires an individual with extensive experience in project management with the ability to multi-task in order to complete medium to large sized projects simultaneously.
  
  Any MLF team member interested in being considered for this role are encouraged to apply online by August 08. Applications received beyond that date are not guaranteed consideration.

  Snapshot of a Day-in-the-Life:

  • Develop and manage (Capital) project plans, operations, budgets and schedules (annual and multi-year) and prepares CER's (Capital Expenditure Requests)
  • Provide engineering support for the operations group
  • Assist senior management in developing and justifying capital expenditure requests
  • Investigate practical, cost-effective and innovative plant improvement solutions
  • Utilize and incorporate Six Sigma and other project management tools, methodology and principles
  • Negotiate contracts and supervise equipment vendors, service providers and contractors
  • Actively participate in company initiatives; e.g. Innovation, Share groups, MyMLF, Energy Efficiency
  • Manage and develop the capital plans of the Plant Manager, Production, Maintenance Managers, Engineering and all other functions to achieve low cost producer status.
  • Supervise contractors when on site.
  • Create project budget based on agreed scope.
  • Form and manage project schedules.
  • Utilize project management tools
  • Other responsibilities as required

  What You’ll Bring:

  The successful candidate will be results-oriented, thrive in a fast paced, demanding environment, and have the ability to develop positive working relationships with all employees. Candidates must have:
  • 5 years experience as an engineer or Mechanical/Electrical Technologist, or 10 plus years of equivalent project experience.
  • Proven track record of handling multiple medium to large sized projects.
  • Team player with effective leadership, interpersonal and communication skills.
  • Strong organizational, analytical and planning abilities combined with practical business sense.
  • Strong computer skills (Microsoft Office and Project Management software).
  • Working knowledge of industry codes and regulations e.g. OH&S, WHMIS, HACCP.
  • Knowledge and experience with Food industry would be an asset

  What We Offer at Maple Leaf Foods:

  • Being part of a high-performance, people-focused company that has an inspiring and unique vision to become the most sustainable protein company on earth, and a deep commitment to sustainable protein across North America.
  • An inclusive company culture and a work environment that keeps our people safe, rewards excellence, and empowers everyone to learn and contribute their best.
  • Competitive Health and Wellness benefits that offer flexibility to meet your individual or family needs, including programs focused on improving mental health and wellbeing. These benefits start on your first day of employment.
  • Defined Contribution Pension Plan with company matching that starts on your first day of employment.
  • Learning and development opportunities, including workshops, ‘speaker series’ events, and resources that allow you to develop your skills and progress your career.
  • Comprehensive tuition reimbursement program that supports continuous learning and development of our team members through investment in eligible degrees, diplomas, professional certification, or trades programs.
  • Supporting our deep commitment to community impact, we offer up to two paid days annually to volunteer at a cause of your choice.