All jobs within 50 km around Etobicoke West Mall in Maintenance & Repair

AREA OF RESPONSIBILITY: 
Reporting to the Foreperson, Mechanical, perform licensed mechanical repairs on all corporately owned vehicles and machinery, and minor repairs on leased equipment, but not limited to and including small hand-held equipment and walk-behind equipment.

• Corrects drivability problems and performs mechanical repairs on all aspects and types of equipment (corporate-owned and leased), including electrical, body, fuel, engine, intake and emission control, transmission, drive shafts and axle assemblies, frames and hitching/coupling, suspension, steering, air supply and braking systems.
• Recognize and detect defects on equipment, report and repair any deficiencies, and perform seasonal overhaul by modifying equipment.
• Inspects vehicles, all trailers and specialize equipment according to MTO regulations.
• Operates computerized diagnostic equipment including hand-held scan tools, printers and conducts road tests to determine vehicle repairs required. Transports vehicles to/from outside repair facilities, arenas, etc.
• Uses a computerized maintenance management system and completes required paperwork for work orders, conditions reports, government inspection records, and daily work reports.
• Co-signs commercial vehicle inspection certificates to ensure confirmation of vehicle safety and MTO compliance
• Diagnoses and repairs a variety of makes of hydraulic, pneumatic, high pressure water and steam systems; makes necessary modifications over manufacturer’s design when needed.
• Diagnoses and calibrate LPG and CNG systems to keep all gaseous emissions within ministry standards; manages complex emission systems.
• Works on refrigerant based system; understands and repair heating and cooling systems on all vehicles and equipment including accessory equipment (coolant heaters).
• Inspects, maintains and uses required personal and protective equipment to ensure safety for personal and common shop use.
• Responds/actions service calls in all weather conditions at any times of the day; performs vehicle and equipment repairs on-site, and transports back to the garage if further repair is required.
• Diagnoses problems and mechanical failures, and ensures safe operation of City of Brampton equipment.
• Programs and sets up various types of equipment, including but not limited to sand, salt, de-icing, brine, and grass cutting equipment; calibrates street sweeping equipment, ice flooders, and emission control units.
• Teaches and provides in-house training to co-workers and Apprentices;
• Provides instructions and collaborates with Garage General Helpers and other staff on equipment usage and maintenance procedures.
• Designs, modifies, and fabricates components on new and used equipment to achieve maximum efficiency.
• Coordinates with Parts department in stocking items, and provides parts list for equipment to be serviced.
• Performs pre-delivery inspections and prepared vehicles for service.
• Performs vehicle repairs and modifications with the use of oxy-acetylene, welding, grinding, soldering, cutting equipment.
• Periodically cleans vehicles and equipment to be able to properly diagnose and repair; performs minor body repairs or patch work on equipment needing attention.
• Maintains up-to-date knowledge of equipment, procedures, technology, etc. Attends training sessions and speciality workshops, trade shows, upgrade courses, reviews manuals, etc.
• Performs general maintenance to shop accessory and ancillary equipment.
• Performs similar and related duties as assigned.

SELECTION CRITERIA:

• High School (Grade 12) graduation plus achievement of two (2) trade licenses - Truck and Coach Technician (310T), and Automotive Service Technician (310S)
• Over four (4) years, up to and including eight (8) years
• Truck and Coach Technician (310T), and Automotive Licence (310S).
• A current class “DZ” license in good standing, or the ability to upgrade an existing class “G” driver’s license to a class “DZ” license.
• License or certification in the following disciplines would be an asset: propane, natural gas, ozone depletion and/or transportation of dangerous goods.
• Exceptional written and verbal communication and interpersonal skills with an emphasis on customer service.
• Working knowledge of Microsoft Office Suite.

What you will do

Maintenance and repair of trucks & trailers from top to bottom including the lighting systems, electrical, brakes, body work, tire changes, ABS systems, etc.

• Work in a safe and effective manner and adhere to all safety policies and procedures.

• Perform service and preventative maintenance.

• Respond to all equipment breakdowns in a timely manner based on priority systems.

• Perform repairs with minimal supervision, taking responsibility and make decisions to see the job to completion within time demands.

• Provide information on equipment/system problems and provide updates as required.

• Demonstrate flexibility when tasks are reassigned or altered.

• Follow Maintenance Quality and Standard Operating Procedures as established.

• Keep personal work bays and areas clean and organized.

• Maintain a clean and safe working environment/shop overall.

• Pass on all relative information on work in progress to the next shift for continuity and completion.

• Use shop equipment with care and respect (clean and store properly after use, identify deficiencies or damaged items for repair or replacement).

• The duties and responsibilities outlined above are representative, but not all-inclusive

What you bring

• 310T/310J licenced

• Heater experience an asset

• Own tools required

• Must be self motivated and be able to work with minimal supervision

• Must be Flexible in hours of works

• Can work with Windows based software packages

• Valid “Ontario” drivers’ licence

• Computerized diagnostic

• Mobile service calls

• Maintain respect for all ethnicities, genders and religions.

• Other duties as assigned

CLOSING DATE:  June 13, 2024

AREA OF RESPONSIBILITY:

Reporting to the Supervisor, Vehicle Maintenance this position coordinates the day-to-day activity of various disciplines to ensure all buses are safe, operational and clean, and that they meet Corporate and regulatory standards.

1. Provide daily supervision of vehicle maintenance staff and equipment. Is readily available to answer staff questions, provide on-the-job training and clear instructions. Motivate staff, mediate and investigate root causes to resolve conflicts. Accountable for scheduling and coordination of staff activities to ensure efficient operation while holding staff accountable, meeting standards and in full compliance of regulations.
2. Ensure accurate record keeping and reporting of a wide range of performance indicators. Ensures completion and submission of Ministry of Transportation Inspections, Drive Clean program, follow-up and report on Joint Health and Safety inspections and issues, accident damage, warranty, manufacturer recalls, Transport Canada recalls and WSIB forms.
3. Provide leadership by creating programs, schedules and Standard Operating Procedures (SOPs) for staff. Ensure SOPs and equipment are up-to-date to maximize productivity without compromising standards and safety. Engage the services of outside suppliers to purchase just-in-time repair parts and to perform services. Oversee the inventory of spare parts through a stockroom with a perpetual inventory and procurement.
4. Recommend changes in on-site procedures to respond to regulatory changes (i.e. safety) and to meet customer service expectations. Identify training and development needs of the team, and inform Supervisor.
5. Share information with Supervisor and others regularly. Assist with budget preparation and setting financial controls. Represent function at meetings and as required on committees. Provide information for RFQs and RFPs. Respond to questions from internal and external stakeholders.

SELECTION CRITERIA:

EDUCATION:

• Minimum high school (Grade 12) diploma or equivalent
• Ontario Motor Vehicle Mechanics Licence, class 310T

REQUIRED EXPERIENCE:

• 2 years experience in a Vehicle Maintenance environment, Heavy Duty Vehicles preferred, with 2 years experience as a team lead or supervisor in a unionized environment preferred

OTHER SKILLS AND ASSETS:

• Good working knowledge of automotive and heavy truck parts
• Ability to understand and document procedures (SOPs) in English language
• Knowledge of Health & Safety (i.e. WHMIS) regulations and other applicable legislation an asset (i.e. Highway Traffic Act)
• Ability to use PC, Microsoft Office

                  LI-AV

**Various tests and/or exams may be administered as part of the selection criteria.

Alternate formats will be provided upon request.

Interview:  Our recruitment process may be completed with video conference technology.

This position is responsible for achieving operational goals and ensures ongoing equipment (system) reliability through preventative maintenance, breakdown repairs, overhaul, troubleshooting/analysis, and equipment upgrades.
 

- Perform service, preventive, and corrective maintenance on all DC equipment following department procedures and trade best practices, working in a safe and effective manner, and adhering to all safety policies. Follow maintenance quality and standard operating procedures as established.
- Respond to all equipment breakdowns in a timely manner. Perform repairs with minimal supervision, taking responsibility and decision making to oversee that the job is complete within time demands.
- Maintain accurate repair parts and work records on computerized maintenance system (MAXIMO). Provide accurate repair and troubleshooting information for all work in Maximo: time spent, parts used, failure comments, suggestions for corrective repairs or improvements, etc.
- Provide information on equipment and system problems to team lead or maintenance coordinator and provide updates as required, seeing job to completion within time requirements.
- Demonstrate flexibility when tasks are re-assigned or altered.
- Train and mentor apprentices in mechanical & job-specific skills.
 

What you bring:
 

- Licensed Industrial Mechanic Millwright (Ontario Certificate of Qualification #433A)
- Ability to stand for long periods with occasional laying, stooping and crouching plus frequent heavy lifting (up to 50 lb)
- Fabrication experience and ability to weld in all positions along with rigging and 5S experience.
- Demonstrated skills/experience with; pneumatics, machinery/repair/overhaul, troubleshooting skills with material handling equipment (e.g., conveyors, stretchwrappers, etc.).
- Certificate of Apprenticeship (Ontario or Canadian equivalent)
- Maximo CMMS experience with strong skills using MS Office (Excel, Word) or Autocad.
- Experience with towlines, automated conveyor systems (Intelligrated is an asset), automated storage and retrieval systems (ASRS, Eaton-Kenway or HK Systems) are assets.
- Health & Safety experience (e.g., safety committee experience).
- Ability to teach/mentor inexperienced trades or apprentices is an asset.

*This is an 8-hour shift, 2p-10p Mon-Fri
* Wage will consider skills and years of experience; plus, a competitive signing bonus to the successful new/external qualified applicants, a generous Profit-Sharing program, and a competitive savings and total rewards program.

This position is responsible for achieving operational goals and ensures ongoing equipment (system) reliability through preventative maintenance, breakdown repairs, overhaul, troubleshooting/analysis and equipment upgrades.

*This is a 12-hour shift 7p-7a (Sunday-Tuesday OR Wednesday -Friday)

* Wage:  $35.69 - $41.62 dependent on skills and years of experience; plus, a competitive signing bonus to the successful new/external qualified applicants, a generous Profit-Sharing program, and a competitive savings and total rewards program. (*External job posting only)

Responsibilities

• Perform service and preventive and corrective maintenance on all DC equipment following department procedures and trade best practices, working in a safe and effective manner, and adhering to all safety policies.

• Respond to all equipment breakdowns in a timely manner.

• Maintain accurate repair parts and work records on computerized maintenance system (MAXIMO)

• Perform repairs with minimal supervision, taking responsibility and decision making to oversee that the job is complete within time demands.

• Provide information on equipment and system problems to team lead or maintenance coordinator and provide updates as required, seeing job to completion within time requirements.

• Provide accurate repair and troubleshooting information for all work in Maximo: time spent, parts used, failure comments, suggestions for corrective repairs or improvements, etc.

• Provide information on equipment and system problems.

• Demonstrate flexibility when tasks are re-assigned or altered.

• Follow maintenance quality and standard operating procedures as established.

• Train and mentor apprentices in mechanical & job-specific skills

Qualifications

• Candidate has Industrial Mechanic Millwright (Ontario Certificate of Qualification #433A) or is graduate Ontario apprentice eligible to write exam for #433A C of Q

• Ability to work at heights up to 100 feet.

• Ability to stand for long periods with occasional laying, stooping, and crouching plus frequent heavy lifting (up to 50 lb)

• Fabrication experience and ability to weld in all positions.

• Demonstrated skills/experience with pneumatics.

• Demonstrated machinery/repair/overhaul & troubleshooting skills with material handling equipment (e.g., conveyors, sorters, combiners, etc.)

• Demonstrated equipment troubleshooting skills.

• Machine shop experience, rigging experience and 5S experience.

Assets

• Certificate of Apprenticeship (Ontario or Canadian equivalent)

• Experience with towlines, automated conveyor systems (Intelligrated is an asset), automated storage and retrieval systems (ASRS, Eaton-Kenway or HK Systems are assets)

• Health & Safety experience (e.g., safety committee experience)

• Strong skills using MS Office (Excel, Word) or AutoCAD

• Ability to teach/mentor inexperienced trades or apprentices.

• Maximo CMMS experience.

• Ability to schedule work and meet deadlines.

• Variable hours of work, as required.

• Must be willing to be on 24 hour call, when required.

• Mechanics licence (Ministry of Training, Colleges and Universities, 310T OR 310S) is required.
• Possession of both 310T or 310S preferred. § Ability to obtain second Mechanic’s license is preferred.
• Valid, non probationary, Ontario “DZ” driver’s licence an asset.
• All current and up-to-date licences in the following disciplines, or the ability to obtain them, an asset: propane, natural gas, certification in ozone depletion and transportation of dangerous goods.

CLOSING DATE:  May 5, 2024

AREA OF RESPONSIBILITY:

Reporting to the Supervisor, Vehicle Maintenance this position coordinates the day-to-day activity of various disciplines to ensure all buses are safe, operational and clean, and that they meet Corporate and regulatory standards.

1. Provide daily supervision of vehicle maintenance staff and equipment. Is readily available to answer staff questions, provide on-the-job training and clear instructions. Motivate staff, mediate and investigate root causes to resolve conflicts. Accountable for scheduling and coordination of staff activities to ensure efficient operation while holding staff accountable, meeting standards and in full compliance of regulations.
2. Ensure accurate record keeping and reporting of a wide range of performance indicators. Ensures completion and submission of Ministry of Transportation Inspections, Drive Clean program, follow-up and report on Joint Health and Safety inspections and issues, accident damage, warranty, manufacturer recalls, Transport Canada recalls and WSIB forms.
3. Provide leadership by creating programs, schedules and Standard Operating Procedures (SOPs) for staff. Ensure SOPs and equipment are up-to-date to maximize productivity without compromising standards and safety. Engage the services of outside suppliers to purchase just-in-time repair parts and to perform services. Oversee the inventory of spare parts through a stockroom with a perpetual inventory and procurement.
4. Recommend changes in on-site procedures to respond to regulatory changes (i.e. safety) and to meet customer service expectations. Identify training and development needs of the team, and inform Supervisor.
5. Share information with Supervisor and others regularly. Assist with budget preparation and setting financial controls. Represent function at meetings and as required on committees. Provide information for RFQs and RFPs. Respond to questions from internal and external stakeholders.

SELECTION CRITERIA:

EDUCATION:

• Minimum high school (Grade 12) diploma or equivalent
• Ontario Motor Vehicle Mechanics Licence, class 310T

REQUIRED EXPERIENCE:

• 2 years experience in a Vehicle Maintenance environment, Heavy Duty Vehicles preferred, with 2 years experience as a team lead or supervisor in a unionized environment preferred

OTHER SKILLS AND ASSETS:

• Good working knowledge of automotive and heavy truck parts
• Ability to understand and document procedures (SOPs) in English language
• Knowledge of Health & Safety (i.e. WHMIS) regulations and other applicable legislation an asset (i.e. Highway Traffic Act)
• Ability to use PC, Microsoft Office

                  LI-AV

**Various tests and/or exams may be administered as part of the selection criteria.

Alternate formats will be provided upon request.

Interview:  Our recruitment process may be completed with video conference technology.

CLOSING DATE:  May 5, 2024

AREA OF RESPONSIBILITY:

Reporting to the Manager, Vehicle Engineering, the Vehicle Engineering Technologist is responsible for providing technical support on vehicle procurement, inspection, diagnosis, preventative maintenance, repair, overhaul, modification and operation of all operating systems associated with the Transit bus fleet and non-revenue support vehicles. Conducts quality assurance audits to improve return on investment.  Acts as liaison with bus manufacturers to resolve non-typical vehicle deficiencies.  Assists management in developing and writing efficient workplace procedures with respect to the maintenance and repair of vehicles.  Sends information to the right people at the right time, protecting the integrity and confidentiality of data.

1. Technical and Business Process Support.

• Influences leaders and staff to make appropriate and effective changes to business processes including standard operating procedures, component exchange/overhaul, technical bulletins and instructional documents.
• Communicates in plain language to educate non-technical staff regarding technical issues.
• Applies technical knowledge and analytical skills to everyday work situations to come up with solutions that meet departmental requirements.
• Assists with preparation of reports regarding fleet and equipment efficiencies and conditions.
• Provides direction and technical support to management and union employees with respect to the diagnosis and repair of Transit Vehicles and their components and systems.
• Monitors quality assurance of audit systems, processes, and products.
• Recommends changes to business processes and supporting technology to improve preventative maintenance and warranty programs.
• Participates in test plan development and review sessions.
• Identifies training and development needs of the team and inform management.

1. Research and Recommendation

• Researches emerging trends and best practices and maintains currency in transit policy knowledge and all regulatory requirements effecting Commercial vehicles.
• Keeps abreast of legislation and regulations relevant to Highway Traffic Act, OHSA, etc.

1. Communication and Reporting

• Escalates complex issues to the manager or designate for resolution.
• Acts as an information resource, ensuring employees and supervisors are aware of the policies, processes and tools related to Maintenance activities.
• Provides advice and documentation to all levels of management on investigative and Preventative Maintenance programs.
• Attends and represents department in various meetings to present reports, recommendations and respond to enquiries.
• Assists in the creation of reports, spreadsheets and presentations in support of management reporting requirements.
• Communicates in a variety of mediums

1. Teamwork & Cooperation

• Assists in coordinating the daily work activities of a unionized and non-unionized workforce with an emphasis on safety and efficiency.
• Assists in special projects as required.
• Works well within diverse groups to support operational goals and objectives.
• Demonstrates corporate values at all times.
• Participates as a member of cross-functional teams.
• Provides support/backup as necessary.

                   SELECTION CRITERIA:

• Post-secondary education, preferably in Transportation or Engineering with a sound knowledge of automotive engineering design principles and maintenance practices utilized in modern vehicles and transit fleets
• 3-5 years of related experience as well as knowledge of Transit vehicle components, testing and maintenance.
• Experience with Hybrid electric and electric Transit buses an asset.
• Experience within public transit or a unionized environment is an asset.
• Exceptional communication and interpersonal skills to interact effectively with employees and management in a professional and tactful manner.
• Strong written and oral communication skills
• Proficient in the use of spreadsheets, databases and word processing.
• Excellent data analysis ability and familiarity with computerized tracking and reporting methods.
• Self-motivated and self-directed with strong initiative and the ability to work independently as well as an effective team member.
• Proven ability to meet deadlines and work under pressure.
• Excellent customer service skills.
• PEO registration as a Professional Engineer, OACETT certification as an Engineering Technologist or possession of a valid Truck & Coach Technician Certificate (310-T) would be considered valued asset
• Must possess a valid Class “G” Ontario Driver’s license in good standing, with a reliable vehicle. Travel to a variety of Transit sites and work areas both indoors and outdoors within the City is required.

 LI-AV

**Various tests and/or exams may be administered as part of the selection criteria.

Interview:  Our recruitment process may be completed with video conference technology.

Reporting to the Supervisor, Permits, provides frontline inspection, support and resolution to resident concerns and quality standard deficiencies as it relates to Provincial Minimum Maintenance Standards, contractor performance and right-of-way maintenance processes and procedures.

• Plans, schedules and performs field investigations relating to the inspection of City roads.
• Identifies and resolves all hazardous conditions detected while patrolling assigned routes.
• Recognizes, measures and records deficiencies under the Minimum Maintenance Standard for Municipal Highways O.Reg.239/02, notifying appropriate personnel/departments and ensures repairs are performed in accordance with quality standards.
• Assists in the maintenance of the Corporation’s road classification system.
• Maintains an accurate and detail log of inquiries, site visits, inspection and investigation records, trends and inventory in order to prepare reports related to patrolled routes, claims and deficiency results.
• Responds to internal and external inquiries related to service requests ensuring a high level of customer service by communicating timelines and ensuring a resolution is reached.
• Investigates and appears at discoveries and legal proceedings regarding claims against the City.
• Creates work orders and supporting documentation (i.e. diagrams) for the repair of utility cuts in the road allowance.
• Liaises with internal departments and external agencies to coordinate restoration of work areas, tracking progress and assessing additional restoration requirements.
• Conducts condition assessments and preventative maintenance inspections of City road infrastructure and assets to aide in the collection of inventory statistics.
• Develops data collection programs related to various asset inventories.
• Performs field investigations related to winter maintenance operations; ensuring a high level of public safety and customer service are adhered to.
• Monitors, records and communicates weather and road conditions (i.e. snow accumulation, air and pavement temperatures and traffic volume) to assist in the appropriate deployment of winter maintenance activities.
• Recommends corrective action to be taken by contractors to maintain contractual performance levels of service.
• Ensures contractor adherence to safety requirements, City policies and procedures.
• Schedules, trains and evaluates Co-op Students.
• Performs additional similar and related duties as assigned.

SELECTION CRITERIA:

• High School (Grade 12) graduation plus an additional program of over one (1) and up to two (2) years in Civil Engineering Technician or equivalent.
• Over one (1) year, up to and including two (2) years of related experience.
• Membership or ability to obtain membership with the Ontario Association of Certified Engineering Technologists and Technicians (OACETT).
• Valid, non-probationary Ontario Class G Drivers Licence.
• Working knowledge of Microsoft Office Suite.
• Exceptional written and verbal communication and interpersonal skills with an emphasis on customer service.
• Ability to work independently or as part of a team.

About Us: Proudly Canadian and Independently Owned, We are Coke Canada!

Night Shift (Monday - Friday 11:00pm-7:30am)

Responsible for preventative maintenance, pre-inspection maintenance, diagnostics and repairs on the company’s fleet of trailers in accordance with the applicable level of training and apprenticeship.

How You’ll Help

• Responsible for the maintenance and repair of trailers according to work orders and in keeping with level of training/apprenticeship (see below)
• Maintaining safe shop environment (may include snow removal from the roof, de-icing, washing vehicles, sweeping, etc.
• Pre-apprentice Trailer Technicians provide support to journeypersons and to apprentices under the leadership of a journeyperson in all aspects of the maintenance and repair of trailers, including but not limited to brakes, suspension systems, surelok, tires (including psi), trailer axles, lighting systems, rear walls and doors, frame and support, chassis, lighting, wiring, hydraulics, heating & refrigeration systems.
• Apprentice Trailer Technicians, under the leadership of a journeyperson, are involved in all aspects of the repair and maintenance of trailers (see above) and may provide general direction and guidance to Pre-Apprentice Technicians. Apprentice Technicians are expected to work more independently and exercise greater judgment through the various stages of the apprenticeship, obtaining final verification of work from a Journeyperson Technician.
• Journeyperson Technicians independently repair and maintain trailers (see above) and provide general direction, guidance, mentoring and training to Pre-Apprentice and Apprentice Technicians.
• Maintenance and repair of trailer bodies, including miscellaneous accessories such as hub caps, decals, reflective tape, painting, etc.
• Documentation of all findings and work done.
• Lead Journeyperson Technicians provide work direction for all team members and act as escalation point for complex maintenance and repairs.
• Provide guidance, mentoring and training to Pre-Apprentice and Apprentice Technicians
• Work independently to complete diagnostic, service, repair and maintain trailers.
• Maintain and repair trailer bodies, including miscellaneous accessories such as hub caps, decals, reflective tape, painting, etc.
• Document and update Service Supervisor/Service Manager on completion time changes, all findings, work done and potential future service requirements.
• Other duties as may be required.

Your Skills & Experience:

• Post secondary training in trailer repair and/or completion of trailer technician certificate course
• Preference given to applicants with Red Seal journeyperson certification
• Additional training in tire repairs and/or refrigeration will be considered an asset
• CVIP, an asset
• Candidates enrolled in trailer repair apprenticeship may also be considered.
• Valid Class 1 license also considered an asset
• Previous work experience in an industrial environment, preferably in the transportation industry
• Previous experience and qualification to perform Safety inspections are considered an asset in this position,
• Ability to obtain CVIP
• Physically fit and able to lift, move, reach, bend, walk, stand, grasp, balance, climb, kneel and crouch for extended period of time
• Ability to work in tight spaces
• Strong knowledge of transportation industry rules and regulations regarding transport trailers and components
• Knowledge of and ability to use safe work practices, including safe lifting and bending, working in tight spaces, etc.
• Troubleshooting and problem-solving abilities
• Strong attention to detail
• Ability to work both independently and as a team member
• Good communication skills –verbal and written

If you’re chosen for the role, you’ll be asked to provide reference and criminal background checks before employment. You’ll only be contacted if you’re selected for an interview.