All jobs within 50 km around Mississauga in Maintenance & Repair

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Maintenance Supervisor position will be responsible for coordinating and supervising the activities of skilled and unskilled maintenance workers ensuring proper methods and procedures are followed to maintain, repair and service equipment, buildings and facilities in compliance with building codes and safety standards. Primarily accountable for maintaining production equipment in a manner that meets organization standards and ensure minimum equipment downtime. In addition, inspect projects to ensure conformity to specifications, direct safety inspections and preventative maintenance programs. This position is responsible for maintaining stock of inventory of materials, parts and specialized tools for the maintenance function.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Manage and direct the activities of employees and equipment in maintenance department in the absence of the maintenance manager.

· Effective employee relations including handling employee complaints, obtaining help and guidance for employee's with problems.

· Conducts monthly department meetings.

· Complete performance evaluations for all maintenance employees.

· Ensure appropriate parts and supplies are available.

· Maintain and direct all PM&PD activities.

· Maintain PMX software and all related documentation.

· Arrange for quotes from contractors in conjunction with maintenance buyer.

· Oversee, mentor and direct all staff.

· Department champion to ensure all contractors have appropriate documentation in order.

· Read completed inspection forms to ensure all maintenance, repair and inspection tasks have been adequately completed by workers.

· Study assembly drawings for equipment to determine what parts are required and how they go together.

· Establish work schedules and shift priorities and appointments to accommodate emergencies and cancellations.

· Develop and monitor detailed overhaul, repair and preventative maintenance schedules for shop tools, equipment and vehicles.

· Develop and monitor operating and project budgets.

· Assume a wide variety of roles to coordinate job tasks with those of junior workers, co-workers and subcontractors.

Credentials

· Completion of secondary school or equivalent general education.

· Journeyperson trade certification in a relevant trade considered an asset.

· MMP (Maintenance Management Professional) certification considered an asset.

· Minimum five years in a maintenance machining environment and two years as a supervisor or equivalent.

· Intermediate knowledge of all applicable Microsoft and other software applications.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

· Knowledge of fire alarm system:  Sprinkler, Ontario fire code.

·Automotive manufacturing experience required.

Desired Characteristics

· Ability to prioritize tasks to maintain efficiency.

· Ability to work independently to provide professional guidance and oversight.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

The Maintenance Mechanic is responsible for inspecting, maintaining, and replacing filters and performing minor preventative maintenance on heating, ventilation, and air conditioning (HVAC) equipment on all client sites to maintain efficiency and mechanical integrity of HVAC units. This position is well-suited for graduates of a college or other post-secondary programs in HVAC studies. Minimum G3 Gas License required, G2 preferred.

KEY DUTIES & RESPONSIBILITIES

Essential duties and responsibilities include the following. Other duties may be assigned.

All routine maintenance and inspection regardless of size of location of the mechanical equipment being inspected or maintained, where this work is done as a periodic routine service inspection maintenance procedure by the employer, limited to:

• Filter Changing and maintenance thereof
• All oil and greasing
• All belt adjusting or replacement
• Cleaning of cooling towers, coils, evaporator and condenser tubes and water treatment
• Delivery of parts and equipment
• General housekeeping
• In the area where a problem exists with non-union competition, the assignment of Maintenance Mechanics duties may be adjusted to meet local conditions in agreement with the Local Union Business Manager
• Cleaning, repairing and routine maintenance of solar energy equipment
• Helper for service and maintenance Journeymen and Apprentices, as long as the Apprentices are fully employed

KNOWLEDGE AND SKILLS

Must possess required knowledge and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• HVAC tools, materials, and safe work practices.
• Types of air filters.

SKILLS

 Must possess required skills and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• Maintaining an established work schedule.
• Effectively using interpersonal and communications skills.
• Effectively using organizational and planning skills.
• Maintaining HVAC equipment.
• Maintaining confidentiality of work-related information and materials.
• Establishing and maintaining effective working relationships.
• Manage the budget within assigned department.

EDUCATION

Minimum G3 Gas fitter certification is required

Must be a member of UA787

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as Other trades certificate or diploma
Experience: Candidates should have experience of 3 to less than 5 years
Area of specialization: Shutdown operations and troubleshooting
Equipment and machinery experience: Automated and robotic system, electrical and electronic controls, fans and blowers, heat exchangers, hydraulic system, industrial and stationary engine, lathes and other machining tools, pneumatic system, power tools, pumps and compressors, tool grinders, welding equipment, hand tools, and forklift
Own tools/equipment: Steel-toed safety boots
Credentials: Industrial Mechanic (Millwright) Trade Certification and Industrial Mechanic (Millwright) Red Seal Endorsement 

Physical Requirements:

• The candidates should be physically fit to handle a demanding workload, capable of working under pressure
• The candidates should demonstrate attention to detail and be willing to work overtime when required
• The candidates should be able to perform bending, crouching, and kneeling tasks, stand for extended periods, and handle weights up to 23 kg (50 lbs)

Other Requirements:

• The candidates should demonstrate excellent oral and written communication skills
• The candidates should be collaborative team players

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Benefits:

• The candidates will get free parking area

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Be prepared for the screening questions. Include answering the following questions while applying:

• Are you available for the advertised start date?
• Are you currently legally able to work in Canada?
• Do you currently reside in proximity to the advertised location?
• Do you have previous experience in this field of employment?
• Do you have the above-indicated required certifications?