All jobs within 50 km around Eringate-Centennial-West Deane in Maintenance & Repair

Major Responsibilities:

Comprised of a team of diverse and dynamic Fleet professionals, the City of Toronto's Fleet Services is striving towards becoming a leader within the industry, modernizing our operations and utilizing analytics to drive our strategic vision. With up to a1000 vehicles assigned to a garage, the Fleet Supervisor manages an efficient garage operation with a high standard of customer service, ensuring compliance to scheduled maintenance programs and is accountable to meet maintenance delivery timelines. Ensuring adherence to City Policy, Human Rights Code, and other legislation, the Supervisor leads a team of maintenance professionals and works collaboratively with their Fleet peers to contribute to the ongoing development, implementation and roll out of new and innovative maintenance program.

As a seasoned mechanical expert, you will manage and assign work to produce the best use of human and physical resources to ensure vehicle compliance to legislative requirements and timely turnaround of vehicle maintenance. 

As a Fleet expert you will work collaboratively with operating Divisions, coaching on preventative maintenance programs, in particular, identifying methods to minimize vehicle failure, improve total cost of ownership and educate on driver/vehicle behaviour and best practices. Promoting the use of accurate vehicle and equipment records, as a Supervisor you understand the need to demonstrate compliance with legislation as well as being a valuable source of information on the potential design and procurement of future replacement vehicles.    

As the leader of your maintenance team, you will be involved in all aspects of staff hiring, providing input into vendor contract documentation/vendor management, as well as, support client and Fleet Procurement in future vehicle purchases.

This is an exciting opportunity for an individual that is knowledgeable in the operation of a Fleet Maintenance garage, able to communicate with staff and clients and promote a high level of commitment to reliable customer service delivery.

Key Qualifications

Your application must describe your qualification as they relation to the following:

Licensing

• Certification as a Journeyperson Truck and Coach (310T) Technician , and an Automotive (310S) Journey person.  Heavy Duty Equipment Technician (421A) certification may be considered, or an equivalent combination of education and experience relevant to the position. 
• A valid class G Ontario Drivers license and the ability to obtain a City Drivers Permit

Leadership

• Considerable experience in leading, coaching, motivating, employees, while providing work direction and holding people accountable.
• Considerable experience training and mentoring employees to ensure current policies practices and techniques are followed.

Mechanical Skills

• Extensive experience in vehicle (heavy and light equipment or vehicles Class 1 to 8) maintenance within a large complex fleet.
• Experience implementing, coordinating, and maintaining a preventative maintenance and repair program in a fleet comparable environment.

Administrative Skills

• Considerable experience with computerized Fleet Management Information Systems, maintenance reporting and analysis (AssetWorks Fleet Focus – M5 – is preferred) with experience using Outlook, Microsoft Word, Excel and PowerPoint.
• Experience analyzing data to evaluate garage performance and leading continuous improvement initiatives in the shop.

Virtual Information Session:

All interested candidates are invited to attend a virtual information session on: Tuesday October 8th, 2024 from 12:00 PM (noon) to 1:00 PM, where they will have an opportunity to learn more about the Fleet Services Division, the role and responsibilities of the Fleet Maintenance Supervisor position. Click here to join the session: Virtual Information Session - FMS

The General Repair Technician is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance with established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems.
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
• Operates facility mechanical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements. 
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems.
• Sound knowledge of processes and practices relating to facility operations and maintenance
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency
• Knowledge and understanding of Building Automation Systems (BAS)
• Knowledge and understanding of HVAC Systems 
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technician’s development
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Hold a valid driver's license

Licenses and/or Professional Accreditation (one of the following bullet points)

• Building Operator Certification or equivalent through an accredited institution required
• Provincial HVAC or apprentice license (ex: Gasfitter I & II license  refrigeration license, etc.)

SUMMARY

The Building Operator II is responsible for the provision of building operations, maintenance and repairs within assigned facilities in accordance with the respective Technician III qualifications.

At this position level:

Maintains and repairs non-technical facility components (i.e. walls, floors, etc)
Demonstrates an interest in enrolling and completing a trades certification or license, or may be enrolled to complete a trades certification or license

KEY DUTIES & RESPONSIBILITIES

• Performs work in accordance to established processes and practices
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection
• Performs regular facility and facility non-technical component monitoring and inspection
• Provides observations about facility and facility non-technical component conditions and deficiencies and provides suggestions for enhancements and repair.
• Monitors assigned facility by conducting facility walkthroughs
• ,Performs routine maintenance and troubleshooting on mechanical building distribution systems – single and redundant cooling distribution systems, steam and heating systems, complex valves, redundant distribution systems, central and package cooling plants, boiler plants, cooling towers, water treatment, point of delivery cooling components, pneumatic systems, backup generators, lighting control systems, digital ballasts and relays, and complex central building control systems facility non-technical component monitoring and inspections
• Responds to routine and on-demand service requests
• Performs preventative maintenance and repair work to non-technical components within the facility (i.e. walls, etc)
• Records resolution data within service maintenance management database.  Ensures work completed meets quality, contract response and all other requirements
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Assists in the implementation of preventative maintenance (PM) program.  Ensures that deficiencies are identified, recorded and escalated, and that related documentations are maintained.
• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliant with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis
• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.
• Other duties as assigned.

Work Requirements

• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise.
• Must be willing to wear personal protective equipment

MINIMUM EDUCATION: High school education

JOB-RELATED EXPERIENCE: More than one year up to three years

KNOWLEDGE AND SKILLS

• Up to 2 years of facility operations and maintenance work experience
• High school diploma plus some trades-related training
• Ability to adhere and to properly execute processes and practices relating to facility operations and maintenance
• Ability to maintain, troubleshoot and repair non-technical facility components
• Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair
• Ability to research, learn and gain greater proficiency in applying on-the-job – fire, life, safety and building codes and standards
• Possesses a strong environmental, health and safety mindset.  Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Demonstrated proficiency with critical environment systems infrastructure equipment and building environment systems (i.e. Boilers, AHU’s, FCU’s, heat exchangers, heat pumps, FPB’s, VAV’s, HMI, VFD’s, generators, lighting control, BAS, etc.)

Licenses and/or Professional Accreditation

• Preferred licensed Industrial Millwright, and/or equivalent
• Demonstrates an interest in enrolling and completing a trades certification or license, or beginning to work towards a trades certification or license
• Must meet enhanced security clearance requirements
• Valid drivers’ license

The Maintenance Mechanic is responsible for inspecting, maintaining, and replacing filters and performing minor preventative maintenance on heating, ventilation, and air conditioning (HVAC) equipment on all client sites to maintain efficiency and mechanical integrity of HVAC units. This position is well-suited for graduates of a college or other post-secondary programs in HVAC studies. Minimum G3 Gas License required, G2 preferred.

KEY DUTIES & RESPONSIBILITIES

Essential duties and responsibilities include the following. Other duties may be assigned.

All routine maintenance and inspection regardless of size of location of the mechanical equipment being inspected or maintained, where this work is done as a periodic routine service inspection maintenance procedure by the employer, limited to:

• Filter Changing and maintenance thereof
• All oil and greasing
• All belt adjusting or replacement
• Cleaning of cooling towers, coils, evaporator and condenser tubes and water treatment
• Delivery of parts and equipment
• General housekeeping
• In the area where a problem exists with non-union competition, the assignment of Maintenance Mechanics duties may be adjusted to meet local conditions in agreement with the Local Union Business Manager
• Cleaning, repairing and routine maintenance of solar energy equipment
• Helper for service and maintenance Journeymen and Apprentices, as long as the Apprentices are fully employed

KNOWLEDGE AND SKILLS

Must possess required knowledge and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• HVAC tools, materials, and safe work practices.
• Types of air filters.

SKILLS

 Must possess required skills and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• Maintaining an established work schedule.
• Effectively using interpersonal and communications skills.
• Effectively using organizational and planning skills.
• Maintaining HVAC equipment.
• Maintaining confidentiality of work-related information and materials.
• Establishing and maintaining effective working relationships.
• Manage the budget within assigned department.

EDUCATION

Minimum G3 Gas fitter certification is required

Must be a member of UA787

Responsibilities

To achieve the Maintenance department and customer operations goals and ensure ongoing equipment (system) reliability through preventative maintenance, breakdown repairs, troubleshooting/analysis and equipment upgrades.

• Perform service and preventive and corrective maintenance on all DC equipment following department procedures and trade best practices, working in a safe and effective manner, and adhering to all safety policies.

• Respond to all equipment breakdowns in a timely manner.

• Maintain accurate repair parts and work records on computerized maintenance system (MAXIMO)

• Perform repairs with minimal supervision, taking responsibility and decision making to oversee that the job is complete within time demands.

• Provide information on equipment and system problems to maintenance supervisor and provide updates as required, seeing job to completion within time requirements.

• Provide accurate repair and troubleshooting information for all work in Maximo: time spent, parts used, failure comments, suggestions for corrective repairs or improvements, etc.

• Provide information on equipment and system problems.

• Demonstrate flexibility when tasks are re-assigned or altered.

• Follow maintenance quality and standard operating procedures as established.

• Train and mentor apprentices in mechanical & job-specific skills

• Other duties as assigned

• Shift:12-hour shift 7p-7a (Sunday-Tuesday)

Qualifications

• Licensed Industrial Mechanic Millwright (Ontario Certificate of Qualification #433A)

• Ability to work at heights up to 100 feet.

• Ability to stand for long periods with occasional laying, stooping, and crouching plus frequent heavy lifting (up to 50 lb)

• Fabrication experience and ability to weld in all positions.

• Demonstrated skills/experience with pneumatics, hydraulics.

• Demonstrated machinery/repair/overhaul & troubleshooting skills with material handling equipment (e.g., conveyors, sorters, AGVs, etc.)

• Demonstrated equipment troubleshooting skills.

• Machine shop experience, rigging experience and 5S experience.

Assets

• Certificate of Apprenticeship (Ontario or Canadian equivalent)

• Experience with automated conveyor systems, Beumer Sorter systems,   Tire Gantry,  and Rite Hite Dock door System

• Health & Safety experience (e.g., safety committee experience)

• Strong skills using MS Office (Excel, Word) or AutoCAD

• Ability to teach/mentor inexperienced trades or apprentices.

• Maximo CMMS experience.

Responsibilities

To achieve the Maintenance department and customer operations goals and ensure ongoing equipment (system) reliability through preventative maintenance, breakdown repairs, troubleshooting/analysis and equipment upgrades.

• Perform service and preventive and corrective maintenance on all DC equipment following department procedures and trade best practices, working in a safe and effective manner, and adhering to all safety policies.

• Respond to all equipment breakdowns in a timely manner.

• Maintain accurate repair parts and work records on computerized maintenance system (MAXIMO)

• Perform repairs with minimal supervision, taking responsibility and decision making to oversee that the job is complete within time demands.

• Provide information on equipment and system problems to maintenance supervisor and provide updates as required, seeing job to completion within time requirements.

• Provide accurate repair and troubleshooting information for all work in Maximo: time spent, parts used, failure comments, suggestions for corrective repairs or improvements, etc.

• Provide information on equipment and system problems.

• Demonstrate flexibility when tasks are re-assigned or altered.

• Follow maintenance quality and standard operating procedures as established.

• Train and mentor apprentices in mechanical & job-specific skills

• Other duties as assigned

• Shift:12-hour shift 7p-7a (Wed - Fri for 2 weeks and then Wed - Sat for the 3rd week)

Qualifications

• Licensed Industrial Mechanic Millwright (Ontario Certificate of Qualification #433A)

• Ability to work at heights up to 100 feet.

• Ability to stand for long periods with occasional laying, stooping, and crouching plus frequent heavy lifting (up to 50 lb)

• Fabrication experience and ability to weld in all positions.

• Demonstrated skills/experience with pneumatics, hydraulics.

• Demonstrated machinery/repair/overhaul & troubleshooting skills with material handling equipment (e.g., conveyors, sorters, AGVs, etc.)

• Demonstrated equipment troubleshooting skills.

• Machine shop experience, rigging experience and 5S experience.

Assets

• Certificate of Apprenticeship (Ontario or Canadian equivalent)

• Experience with automated conveyor systems, Beumer Sorter systems,   Tire Gantry,  and Rite Hite Dock door System

• Health & Safety experience (e.g., safety committee experience)

• Strong skills using MS Office (Excel, Word) or AutoCAD

• Ability to teach/mentor inexperienced trades or apprentices.

• Maximo CMMS experience

Bolton, ONAJ Billes Distribution Centre [AJBDC]

Reporting to the Manager, Maintenance Control, this position supports MOC and Cabin MOC for all administrative requirements. This position provides data entry support for TRAX data entry (Defects), enabling positive control and on time performance. This position also supports third party and internal technicians on TRAX functionality and Air Canada processes, as well as third party line maintenance contractors with their required data entry.

Responsibilities:

• Provide central point for Line Maintenance on a 24 hour around- basis for TRAX data entry (Defects) support.  
• Liaise with other Third-party technicians, internal departments, along with internal personnel as required to support TRAX update.
• Maintaining up to date Training profile and TRAX & Aircraft Defect Handling processes.
• Operational support for TRAX data entry (Defects), enabling positive control and on time performance.
• Liaise with internal Air Canada departments (receiving inspection, AOG, Stores, etc.) to enable positive control and on time performance.
• Provide administrative functions in Maintenance Operations Control to enable technical dispatch. 
• This position will provide assistance by supporting the Manager, MOC in the non-technical, administrative and transactional activities associated with MOC and Cabin MOC.
• Provide routine Defect update performance reporting, as well as ad hoc reports required to support the business.
• Liaise with MOC Management to proactively respond to MOC staffing administrative requirements.
• Act as point of with employees for schedules/ change notifications 
• Responsible for the completion and accuracy of MOC employee time exceptions and to liaise with eservices to communicate employee status and schedules.
• Provide accurate and updated schedule changes information to MOC Management.
• Support the Managers with employee schedule development and identification of anticipated staffing issues and canvassing for overtime.
• Administrative support for AOG booking related to hotel booking, AOG bookings and reconciling invoices. 
• Working with software tools this position will track and report out on MOC employee training status as well as departmental and branch training compliance

Qualifications

• College diploma, professional degree or equivalent work experience.
  
• Proven knowledge of TRAX, for example but not limited to: Part transactions, Defect deferral, and GMM TRAX requirements is a definite asset.
  
• Knowledge of TRAX & Aircraft Defect Handling is a definite asset.
  
• Proficiency with PC (Word, Excel, MS Outlook) is a definite asset.
  
• Ability to shift focus given changing priorities and time constraints.
  
• Willingness to work shifts and at times extended hours. 
  
• Demonstrate strong interpersonal skills and ability for teamwork. 
  
• Detailed oriented.
  
• Excellent English communication skills both (oral & written). 
  
• Ability to work with minimum supervision. 
  

Conditions of Employment:

• Candidates must be eligible to work in the country of interest, at the time any offer of employment is made and seeking any required work permits/visas or other authorizations which may be required is the sole responsibility of the candidates applying for this position.

Linguistic Requirements

Based on equal qualifications, preference will be given to bilingual candidates.

Posting End Date: Sep 20, 2024

As an Electronics Technician, you will assemble, prototype and test electronic boards and will help integrate and build electro-mechanical models and systems. You will also troubleshoot electronics boards, prototypes and products, test, and repair on a regular basis.

How will you create impact?

• Ability to precisely solder electronics components, including soldering and de-soldering SMD components, and achieve high-quality PCB assemblies
• Fully understand and apply the knowledge of wiring diagrams and schematics, electronics operations, and functions of electronic components to troubleshoot, assemble, and test electronic prototypes and provide recommendations on performance improvements
• Excellent understanding of electronics equipment and how to use them effectively including soldering iron, oscilloscopes, multimeters, power supplies, signal generators, etc.
• Assist in the design, development, prototyping, repairing, and testing of electronic boards, equipment, and products
• Help with integrating electronics into mechanical prototypes and assist with building and testing early prototypes
• Assist in inspection, adjusting and testing of electronics and electro-mechanical components and assemblies to evaluate product specifications and tolerances
• Set up and operate test equipment to diagnose, evaluate and analyze the performance of electrical and electronic assemblies, boards, and products
• Assembling, repairing, troubleshooting and maintaining electronic components, and systems.
• Sourcing and fabricating replacement electronic parts

What are your skills and experience?
 

• Diploma of Electronics Technology or equivalent
• Certified Technician
• Minimum of 4 years prior experience in electronics, from reading wiring diagrams and schematics to using soldering and testing equipment
• Model making and prototyping skills
• Proficient eye and hand coordination to repair and install small electronic components
• Organizational skills in keeping testing equipment in good working condition, maintaining accurate and usable records for parts, components, and manuals
   

#LI-Onsite #LI-HM1