All jobs within 50 km around Brampton in Maintenance & Repair

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Maintenance Supervisor position will be responsible for coordinating and supervising the activities of skilled and unskilled maintenance workers ensuring proper methods and procedures are followed to maintain, repair and service equipment, buildings and facilities in compliance with building codes and safety standards. Primarily accountable for maintaining production equipment in a manner that meets organization standards and ensure minimum equipment downtime. In addition, inspect projects to ensure conformity to specifications, direct safety inspections and preventative maintenance programs. This position is responsible for maintaining stock of inventory of materials, parts and specialized tools for the maintenance function.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Manage and direct the activities of employees and equipment in maintenance department in the absence of the maintenance manager.

· Effective employee relations including handling employee complaints, obtaining help and guidance for employee's with problems.

· Conducts monthly department meetings.

· Complete performance evaluations for all maintenance employees.

· Ensure appropriate parts and supplies are available.

· Maintain and direct all PM&PD activities.

· Maintain PMX software and all related documentation.

· Arrange for quotes from contractors in conjunction with maintenance buyer.

· Oversee, mentor and direct all staff.

· Department champion to ensure all contractors have appropriate documentation in order.

· Read completed inspection forms to ensure all maintenance, repair and inspection tasks have been adequately completed by workers.

· Study assembly drawings for equipment to determine what parts are required and how they go together.

· Establish work schedules and shift priorities and appointments to accommodate emergencies and cancellations.

· Develop and monitor detailed overhaul, repair and preventative maintenance schedules for shop tools, equipment and vehicles.

· Develop and monitor operating and project budgets.

· Assume a wide variety of roles to coordinate job tasks with those of junior workers, co-workers and subcontractors.

Credentials

· Completion of secondary school or equivalent general education.

· Journeyperson trade certification in a relevant trade considered an asset.

· MMP (Maintenance Management Professional) certification considered an asset.

· Minimum five years in a maintenance machining environment and two years as a supervisor or equivalent.

· Intermediate knowledge of all applicable Microsoft and other software applications.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

· Knowledge of fire alarm system:  Sprinkler, Ontario fire code.

·Automotive manufacturing experience required.

Desired Characteristics

· Ability to prioritize tasks to maintain efficiency.

· Ability to work independently to provide professional guidance and oversight.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

The Maintenance Mechanic is responsible for inspecting, maintaining, and replacing filters and performing minor preventative maintenance on heating, ventilation, and air conditioning (HVAC) equipment on all client sites to maintain efficiency and mechanical integrity of HVAC units. This position is well-suited for graduates of a college or other post-secondary programs in HVAC studies. Minimum G3 Gas License required, G2 preferred.

KEY DUTIES & RESPONSIBILITIES

Essential duties and responsibilities include the following. Other duties may be assigned.

All routine maintenance and inspection regardless of size of location of the mechanical equipment being inspected or maintained, where this work is done as a periodic routine service inspection maintenance procedure by the employer, limited to:

• Filter Changing and maintenance thereof
• All oil and greasing
• All belt adjusting or replacement
• Cleaning of cooling towers, coils, evaporator and condenser tubes and water treatment
• Delivery of parts and equipment
• General housekeeping
• In the area where a problem exists with non-union competition, the assignment of Maintenance Mechanics duties may be adjusted to meet local conditions in agreement with the Local Union Business Manager
• Cleaning, repairing and routine maintenance of solar energy equipment
• Helper for service and maintenance Journeymen and Apprentices, as long as the Apprentices are fully employed

KNOWLEDGE AND SKILLS

Must possess required knowledge and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• HVAC tools, materials, and safe work practices.
• Types of air filters.

SKILLS

 Must possess required skills and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• Maintaining an established work schedule.
• Effectively using interpersonal and communications skills.
• Effectively using organizational and planning skills.
• Maintaining HVAC equipment.
• Maintaining confidentiality of work-related information and materials.
• Establishing and maintaining effective working relationships.
• Manage the budget within assigned department.

EDUCATION

Minimum G3 Gas fitter certification is required

Must be a member of UA787

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as Other trades certificate or diploma
Experience: Candidates should have experience of 3 to less than 5 years
Area of specialization: Shutdown operations and troubleshooting
Equipment and machinery experience: Automated and robotic system, electrical and electronic controls, fans and blowers, heat exchangers, hydraulic system, industrial and stationary engine, lathes and other machining tools, pneumatic system, power tools, pumps and compressors, tool grinders, welding equipment, hand tools, and forklift
Own tools/equipment: Steel-toed safety boots
Credentials: Industrial Mechanic (Millwright) Trade Certification and Industrial Mechanic (Millwright) Red Seal Endorsement 

Physical Requirements:

• The candidates should be physically fit to handle a demanding workload, capable of working under pressure
• The candidates should demonstrate attention to detail and be willing to work overtime when required
• The candidates should be able to perform bending, crouching, and kneeling tasks, stand for extended periods, and handle weights up to 23 kg (50 lbs)

Other Requirements:

• The candidates should demonstrate excellent oral and written communication skills
• The candidates should be collaborative team players

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Benefits:

• The candidates will get free parking area

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Be prepared for the screening questions. Include answering the following questions while applying:

• Are you available for the advertised start date?
• Are you currently legally able to work in Canada?
• Do you currently reside in proximity to the advertised location?
• Do you have previous experience in this field of employment?
• Do you have the above-indicated required certifications?

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 1 to less than 2 years

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to adjust, repair, or replace parts and components of commercial transport truck systems and automotive systems
• The candidates should be able to inspect and test mechanical units to locate faults and malfunctions, inspect motors in operation, and review work orders
• The candidates should be able to adjust, repair, or replace parts and components of truck-trailer systems, repair or replace mechanical units or components, and test and adjust repaired systems to manufacturer’s specifications
• The candidates should be able to perform scheduled maintenance service, advise customers on work performed and future repair requirements, and provide customer service

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Our employee-partners enjoy:

• Competitive Pay
• Weekly Pay Cheques
• RRSP and DPSP Contribution
• Medical, Dental & Vision Insurance Package
• Disability & Life Insurance Package
• Paid Vacation & Holidays

• Career Advancement Opportunities

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates need standard educational qualifications such as College, CEGEP, or other non-university certificate or diploma from a program of 1 year to 2 years or equivalent experience
Experience: Candidates should have experience of 1 to less than 2 years

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position.
• International Candidates who don’t have a valid Canadian work permit also can apply

Benefits:

• The candidates will get on-site amenities, team-building opportunities, and free parking

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume, references attesting to experience, copy of portfolio or relevant work examples, and the highest level of education and name of the institution where it was completed) through below-mentioned details.

In-person
1845 Birchmount Rd Unit 3-4
Scarborough, ON
M1P 0B8
Between 12:00 PM and 05:00 PM

Be prepared for the screening questions. Include answering the following questions while applying:

• Are you available for shift or on-call work?
• Are you currently legally able to work in Canada?
• Are you willing to relocate for this position?
• Do you currently reside in proximity to the advertised location?
• Do you have previous experience in this field of employment?
• What is the highest level of study you have completed?
• What is your current field of study?

The General Repair Technician II is a mid entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility components (i.e. walls, floors, etc.). The Technician II is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility technical and non-technical component monitoring and inspection.
• Responds to routine service requests and performs preventative and corrective maintenance.
• Operates facility mechanical, electrical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.

Administration

• Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

KNOWLEDGE & SKILLS

• High school diploma or equivalent
• Minimum 3 years of facility operations and maintenance work experience
• Knowledge of processes and practices relating to facility operations and maintenance
• Ability to maintain, troubleshoot and repair non-technical facility components
• Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair
• Ability to research, learn, and gain greater proficiency in applying on-the-job—fire, life, and building codes and standards
• Possesses a strong environment, health and safety mindset. Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Basic knowledge and understanding of Building Automation Systems (BAS)
• Ability to read understand and interpret technical drawings and information
• Self-motivated
• Computer literacy
• Demonstrated maintenance and repair skills
• Must be able and willing to work shifts, be available for on-call/stand-by and emergency call outs as they arise
• Must be willing to wear personal protective equipment
• Must meet enhanced security clearance requirements
• Valid drivers’ license

Licenses and/or professional accreditation 

• Demonstrate an interest in obtaining a diploma or a certificate, or be in the process of obtaining one.
• Meet the requirements for a higher security clearance.
• Any one of the following are considered an asset:
  • Building Operator Certification or equivalent through an accredited institution preferred
  • Building Systems Maintenance Certificate (SMC)
  • Systems Maintenance Administrator (SMA)
  • Systems Maintenance Technician (SMT)
  • Facilities Technician Certification
  • Working towards a trade license, an asset
  • Working towards Building Environment Systems (BES) Operation Class 1

General Repair Technician III is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

•    Provides observations about residential houses, mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance with established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on residential equipment and other systems.
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
• Operates facility mechanical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.

.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements. 
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Ability to research, learn and gain greater proficiency in applying on-the-job – fire, life, safety and building codes and standards.
• Create scopes of work for various residential repairs / renovations.  
• Other duties as assigned

EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years experience in residential construction and maintenance. 
• Sound knowledge of processes and practices relating to residential maintenance
• Ability to create a quality scope or work, engage with contractors and follow up on the progress of work to completion. 
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment.
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency
• Knowledge and understanding of HVAC Systems, residential plumbing, or  water wells and septic systems.
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technician’s development
• Must be available for on-call/standby and emergency call-outs as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Hold a valid driver's license

Licenses and/or Professional Accreditation (one of the following bullet points)

• Demonstrates an interest in enrolling and completing a trades certification or license, or beginning to work towards a trades certification or license
• Must meet enhanced security clearance requirements
• Valid drivers’ license

Overview