All jobs within 50 km around Abbotsford in Maintenance & Repair

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates need standard educational qualifications such as Registered Apprenticeship certificate or equivalent experience
Experience: Candidates should have experience of 3 to less than 5 years’

Other Requirements:

• The candidate should be client focus, organized, flexible and judgmental
• The candidates should have efficient interpersonal skills

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorized (Work Permit) to work in Canada
• If Candidates unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• • The candidates should be able to install underground wiring and cables, install, replace and repair electrical controls and panel boxes, splice, join and connect wires
  • The candidates should be able to test and measure voltage, loads, ground faults integrity of circuits, troubleshoot and isolate faults, connect power to audio and visual equipment, install surface mount and/or overhead cables

• The candidates should be able to install power generation, stand-by power generation and power conditioning systems, ground and bond electrical equipment, systems and structures including swimming pools and hot tubs
• The candidates should be able to renovate electrical systems in residential and commercial structures, conduct preventive maintenance programs
• The candidates should be able to read and interpret blueprints, maps, drawings and specifications

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume) through below mentioned details.

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 3 to less than 5 years

Physical Requirements:

• The candidates should be able to work in noisy environments and be comfortable with dusty condition
• The candidates should be capable of handling heavy loads and prepared for physically demanding tasks
• The candidates should demonstrate attention to detail and be comfortable with bending, crouching, and kneeling
• The candidates should be able to stand for extended periods and work effectively under pressure

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to detect and troubleshoot irregularities and malfunctions, as well as repair or replace defective machinery parts
• The candidates should be able to fabricate parts required during overhaul, maintenance, or set-up, and perform routine maintenance work on machinery
• The candidates should be able to read and interpret blueprints, maps, drawings, and specifications, as well as operate machining tools to fabricate parts
• The candidates should be able to assemble machinery and equipment (prior to installation), install machinery and equipment, and operate hoisting and lifting equipment

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

By mail
10945 132 Street
Surrey, BC
V3T 3W8

In person
10945 132 Street
Surrey, BC
V3T 3W8
Between 10:00 a.m. and 04:00 a.m

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 2 to less than 3 years 

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to interpret welding process specifications and operate manual or semi-automatic, fully automated welding equipment
• The candidates should be able to read and interpret welding blueprints, drawings specifications, manuals, and processes, as well as examine welds to ensure they meet standards and/or specifications
• The candidates should be able to operate manual or semi-automatic flame-cutting equipment, operate brakes, shears, and other metal shaping, straightening, and bending machines, and fit, braze, and torch-straighten metal
• The candidates should be able to determine the weldability of materials and operate hoisting and lifting equipment
• The candidates should be able to operate previously set-up welding machines to fabricate or repair metal parts and products, operate previously set-up brazing or soldering machines to bond metal, and start up, shut down, adjust, and monitor robotic welding production lines
• The candidates should be able to maintain and perform minor repairs on welding, brazing, and soldering equipment

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as trades certificate or diploma
Experience: Candidates should have experience of 1 to less than 2 years’
Security and safety: Criminal record check

Transportation information: Willing to travel
Work setting: Construction, Repair, Various locations, Maintenance, Commercial, Residential 

Physical Requirements:

• The candidates should be physically demanding
• The candidates should be able to work with attention to detail
• The candidates should be willing to for overtime

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorized (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume, cover letter) through below mentioned details.

By email
[email protected]

Be prepared for the screening questions. Include answering the following questions while applying:

• Are you available for the advertised start date?
• Are you currently a student?
• Are you currently legally able to work in Canada?
• Are you willing to relocate for this position?
• What is the highest level of study you have completed?
• What is your current field of study?
• What is your current level of study?

As a member of the Maintenance team, the Millwright – Relief is responsible for the routine/preventive maintenance and troubleshooting of the manufacturing equipment, building and Building Equipment. This is a full-time permanent relief position, home shift is Wednesday-Saturday 3:00PM – 12:30AM.

Schedule:  Home shift is Wednesday-Saturday 3:00PM – 12:30AM, when not relieving

Wage: $50.10 per hour

We support and care for our employees by providing them with…

• Competitive salaries
• Advantageous corporate agreements
• Full range of group insurance benefits
• Group retirement pension plan with employer contribution
• Purchase option of company stocks
• Group RRSP
• Health and wellness program in the workplace
• Assistance program for employees and their families
• Saputo products at a discounted price

How you will make contributions that matter…

• Facilitate the timely and efficient processing and packaging of fluid products.
• Carries out preventative maintenance on assigned equipment.
• Trouble shoots and repairs equipment in breakdown situations to ensure production efficiencies are achieved.
• Provides training to plant staff as required.
• Works with other trades groups to complete project assignments.
• Works with vendors as required.
• Coordinates and assist in mechanical and electrical installations.
• Maintains/Programs plant PLCs (if qualified to do so).
• Keeping of proper HACCP documents, Sanitary and Preventative maintenance documents as required.
• Performance of other duties as required.

You are best suited for the role if you…

• Certified Journeyman
• Excellent mechanical skills and ability to carry out general plant/ equipment maintenance
• Food industry or high-speed packaging experience
• PLC training and experience would be an asset
• Demonstrate excellent trouble shooting skills and analytical skills
• Able to work independently with minimum supervisor and within an interdependent team
• A high level of self-motivation and initiative
• Proven proficiency and dependability in current position with a good safety record
• Able to work in confined spaces
• Some heavy lifting required

PURPOSE OF POSITION:

In this challenging role you will be a member of a team working in a high production environment performing preventative maintenance to locomotives. The starting Diesel Mechanic rate is $45.24 per hour with a $15,000 signing bonus. The Diesel Mechanic classification will be determined by experience and current shop mix. 

By applying to this job you will be put into a pool of candidates that will be used throughout the year to fill positions when they become available in this area. You will only be contacted if you are selected to move forward in the hiring process.

POSITION ACCOUNTABILITIES:

• Maintain, inspect, service, test and repairs all systems on locomotives, mobile equipment and vehicles used in plant, yard and road service
• Services locomotive cabs which include cleaning/washing cab walls, windows, floors and servicing of locomotive toilets compartment and toilets
• Make the evaluation of parts for reuse, repair or replacement
• Work to blueprints, schematic drawings, service manual and other like information. Adapts to new methods, processes, material and equipment
• Perform non-structural welding, (i.e. Tacking)
• Perform adjustment and calibration to mechanical components
• Perform modification and construct mechanical assemblies
• Perform maintenance and low voltage repairs of locomotive electrical systems
• Use various hand and power hand tools
• Operate equipment such as overhead or mobile cranes and forklifts to assist in assignments
• Adapts to new methods, processes, material and equipment

POSITION REQUIREMENTS:

• Must have a High School Diploma or General Equivalence Diploma
• Must have completed previous apprenticeship and ability to provide proof of apprenticeship
• Must have 6 years practical or general experience in mentioned apprenticeship applicable to the trade or possess a Unifor Local Journeyman/Journeywomen 101R card 
• Must Possess one of the following; Journeyman Red Seal Heavy Duty Mechanics Certification, Journeyman Automotive Technician Certification, and Journeyman Electrician Certification
• Strong problem solving and computer skills
• Must be able to work within strict established safety and work guidelines/rules to complete job
• Will be required to obtain all CPKC certification pertaining to specific tasks and assignments
• CPKC operates 7 days a week, 24 hours a day, 365 days a year; must be able to work on various shifts and days off

WHAT CPKC HAS TO OFFER:

• Flexible and competitive benefits package
• Competitive company pension plan
• Annual Fitness Subsidy
• Part-time Studies Program
• Employee Share Purchase Plan

ADDITIONAL INFORMATION: 

Medical Requirements:

Operating safely is a core foundation of CPKC. Our commitment is to protect our people, customers, communities in which we operate the environment and our assets. We are also committed to a healthy and safe workplace. CPKC’s Alcohol and Drug Policy and Procedures (“Policy and Procedures”) support these commitments.   All new hires for a safety sensitive position will be required to complete a pre-employment medical that includes a physical, vision, hearing, alcohol and drug audit assessment. Pre-employment qualification drug test(s) are also required.

Background Investigation:

The successful candidate will need to successfully complete the following clearances:    

• Criminal history check
• Drivers license verification
• Education verification

CPKC is an employment equity employer committed to the principles of employment equity and inclusion. We encourage all qualified candidates to apply including women, Black, Indigenous, People of Colour (BIPOC), members of the LGBTQ+ community, and people with disabilities. Accommodations for the job application process can be provided, as appropriate, upon request. All applicant information will be managed in accordance with the federal Personal Information Protection and Electronic Documents Act (PIPEDA)”.

Canadian Pacific (CPKC) and Kansas City Southern (KCS) are now CPKC. As the only truly North American railway, we are making big moves! Drawing on our strong foundations and heritage, CPKC moves essential goods across our 20,000-mile network to support economic growth throughout Canada, the U.S. and Mexico. Be a part of history as we connect a continent and create exciting career opportunities across our new transnational network. Visit cpkcr.com to learn about the CPKC advantage, our purpose and culture.

PURPOSE OF THE POSITION:

You will assist the General Foreman with the planning, scheduling and assignment of manpower to specific jobs within the Shop/Yard and Line Point environments ensuring that all repairs and/or servicing are performed in a safe and efficient manner, in accordance with Company, Association of American Railroad and Transport Canada regulations.

POSITION ACCOUNTABILITIES:

• Conduct job briefings, end of shift briefings, safety meetings and activities, ensuring that safety rules, procedures and policies are adhered to through efficiency testing and safety tracking document

• Correct and document safety incidents, safety hazards/concerns, investigates for corrective actions to the various departments, involving the Mechanical Manager and Health and Safety Committee in the prescribed timelines

• Support, communicate and deliver to key performance indicators.  Leads to ensure all direct reports have an understanding of the business objectives, as well as the role they are all accountable for

• Communicate and interact regularly with management within field operations to ensure locomotive repair and train servicing is meeting the expectations of internal and external customers

• Ensure that there is the appropriate level of stock/material and is responsible for ordering within prescribed limits through the SAP system.  Supports all expenditure reduction initiatives

• Maintain communication and fosters positive working relationships with local union officials. Ensures the collective agreement is understood and managed as it is written

• Support and participate in continuous improvement initiatives to improve productivity and effectiveness of the operation.  Support Lean Philosophy and Principals

• Ensure locomotive bad order repair, cycle time, dwell time, productivity and key metrics are met including inventory management for all locomotives on the territory.  Coordinate with Field Operations to ensure Local Service Operating Plan (LSOP) targets are met.

• Direct road repair on the territory to meet 24 hour repair cycle time

• Ensure repairs and train servicing are in compliance with AAR, Transport Canada standards and CPKC policies

• Support mechanical forces at train incidents within their jurisdiction adhering to the guidelines of the Emergency Response Plan

• Communicate and interact regularly with local/external counterparts

• Work directly with employees in the shop & yard environments to establish self-managed work teams and provides guidance and support to employees to bring about the vision of an empowered and engaged workforce

POSITION REQUIREMENTS:

• Must possess a minimum of a High school diploma or mechanical trade certification

• Proficient knowledge of railway operations (road, yard, locomotive, mechanical)

• Working knowledge of CPKC systems (CIM, TYES, YOP, Nexus, ITM, SAP and Wreck Estimator)

• Microsoft Outlook, Word, Power Point and Excel

• Knowledge of collective agreement/non- union policies

• Strong mechanical aptitude

• Must be able to work with vast array of employees and be adaptable

• Must be able to work under pressure and adapt to change
• Able to drill down, understand root cause and resolve complex issues

WHAT CPKC HAS TO OFFER:

• Flexible and competitive benefits package

• Competitive company pension plan
• Employee Share Purchase Plan
• Performance Incentive Program 
• Annual Fitness Subsidy
• Part-time Studies Program

ADDITIONAL INFORMATION:

As an employer with national presence, the possibility does exist that the location of your position may be changed based on organizational requirements.

Medical Requirements:

Operating safely is a core foundation of CPKC. Our commitment is to protect our people, customers, communities in which we operate the environment and our assets. We are also committed to a healthy and safe workplace. CPKC’s Alcohol and Drug Policy and Procedures (“Policy and Procedures”) support these commitments.   All new hires for a safety sensitive position will be required to complete a pre-employment medical that includes a physical, vision, hearing, alcohol and drug audit assessment. Pre-employment qualification drug test(s) are also required.

Background Investigation:

The successful candidate will need to successfully complete the following clearances:    

• Criminal history check
• Reference check
• Driver's License Verification

Management Conductor Program:

Becoming a qualified conductor or locomotive engineer is the single best way for a management employee to learn the business at CPKC. You may be required to obtain a certification or to maintain your current certification/qualification as a conductor or locomotive engineer.

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Other trades certificate or diploma or equivalent experience
Experience: Candidates need experience of 2 years to less than 3 years
Certificates, licences, memberships, and courses: Candidates must have Electrician Trade Certification

Shifts: Day and Morning
Work setting: Construction, service, repair, various locations, maintenance, commercial, residential, installation and troubleshooting/diagnostic

Physical Requirements:

• The candidate should be able to work in fast-paced environment, maintain tight deadlines and also pay attention to detail
• The candidate should be physically strong

Other Requirements:

• The candidate should be able to work in an organized way
• The candidate should be someone who can judge and also have excellent written communication
• The candidate should have experience of equipment and machinery like conventional electrical devices, electronic devices, high voltage and energized equipment and also instrumentation
• The candidate should have specialization on lighting system

Responsibilities:

• The candidate should be able to have professionalism in customer service
• The candidate should be able to install, replace and repair electrical controls and panel boxes and also install surface mount and/or overhead cables
• The candidate should be able to keep maintenance reports and documentation, splice, join and connect wires, renovate electrical systems in residential and commercial structures and also read and interpret blueprints, maps, drawings and specifications
• The candidate should be able to test and measure voltage, loads, ground faults integrity of circuits, troubleshoot and isolate faults and also conduct preventive maintenance programs

Benefits:

• The employees get health care plan

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]