206 Jobs Found
Motor vehicle mechanic Full-time Job
Top Auto Repair & Collision Ltd
Maintenance & Repair Scarborough VillageJob Details
Requirements:
Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 1 to less than 2 years
Candidate Status:
- Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
- Candidate must have legal authorization (Work Permit) to work in Canada
- If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position
Responsibilities:
- The candidates should be able to adjust, repair, or replace parts and components of commercial transport truck systems and automotive systems
- The candidates should be able to inspect and test mechanical units to locate faults and malfunctions, inspect motors in operation, and review work orders
- The candidates should be able to adjust, repair, or replace parts and components of truck-trailer systems, repair or replace mechanical units or components, and test and adjust repaired systems to manufacturer’s specifications
- The candidates should be able to perform scheduled maintenance service, advise customers on work performed and future repair requirements, and provide customer service
How to apply:
If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details
By email
[email protected]
Motor vehicle mechanic
Top Auto Repair & Collision Ltd
Scarborough Village - 11.35kmMaintenance & Repair Full-time
28.50
Learn More
Maintenance Worker II Full-time Job
Maintenance & Repair Scarborough VillageJob Details
Under general supervision, the Maintenance Worker performs heavy cleaning and custodial duties, moves and sets up furniture and equipment on a routine basis and for special events.
Typical Duties:
The following illustrative tasks indicate the level of skill required, and the extent of responsibility involved in this job. They in no way limit the incumbent to the tasks indicated. Flexibility of the employee to perform a wide variety of functions is necessary in successfully fulfilling the requirements of this position. The degree to which each employee performs each of the following tasks listed below will vary according to where and when the employee is scheduled to work.
- cleans and scrubs floors and washrooms using appropriate equipment including automatic floor cleaning machines, electric buffers, mops and vacuum cleaners;
- performs cleaning and dusting at elevated heights, using ladder and lifting devices as required;
- sets up cleaning equipment for use; maintains cleaning equipment;
- reconditions floors, repairs and cleans grout, using appropriate equipment;
- performs routine and special room set ups which entails: following work orders, room diagrams and verbal instructions; moving and setting up of furniture and equipment according to plan and schedule; opens and locks doors to assigned rooms; may assisting setting out academic examination booklets;
- clears furniture and equipment as requested and stores in appropriate areas.
- disassembles/reassembles furniture for the purpose of moving;
- performs maintenance functions such as changing lights and adjustments to furniture and equipment;
- other related duties as required.
Minimum Requirements for Selection
Education:
Completion of Grade 10 or equivalent; technical training is desirable.
Experience:
One year of related work experience, education may be substituted for experience.
Other:
Physical ability to perform required duties, including heavy lifting and pushing of furniture and equipment, considerable walking and stair climbing; ability to communicate effectively in English (oral and written), ability to follow written instructions; awareness of building security and fire procedures; tact and diplomacy in dealing with others; ability to work at varying heights and to operate and use safety ladders and lifts. Applicants are also expected to show evidence of a commitment to equity, diversity, inclusion, and the promotion of a respectful and collegial learning and working environment.
Notes:
- The hours of work will be Monday to Friday from 12:30 pm - 9:00 pm.
- A full job description is available upon request from the UTSC HR Office.
Closing Date: 08/07/2024,11:59PM ET
Employee Group: Hourly
Job Category: Facilities/Ancilliary Services
All qualified candidates are encouraged to apply; however, Canadians and permanent residents will be given priority.
Maintenance Worker II
The University Of Toronto
Scarborough Village - 11.35kmMaintenance & Repair Full-time
25.50
Learn More
Maintenance Supervisor Full-time Job
Maintenance & Repair Scarborough VillageJob Details
Cintas is seeking a Maintenance Supervisor to lead all maintenance activities at our Cintas facilities. Responsibilities include improving functionality and reliability of all production and facility equipment including but not limited to mechanical, electrical, pneumatic and hydraulic systems equipment and components; managing and scheduling all facility and equipment work assignments; performing and scheduling all preventative maintenance assignments; developing and implementing safety processes and procedures; managing building, equipment, capital expenditures and parts and labor budgets; preparing maintenance reports; identifying and evaluating parts suppliers, negotiating with inside and outside service companies; conducting training for all maintenance staff; supervising and mentoring maintenance team; maintaining staffing levels and responding to emergency alarms.
Skills/Qualifications
Required
- Minimum 5 years' experience repairing industrial processing equipment in an industrial environment or in the military
- Minimum 2 years' supervisory experience
- Equipment knowledge: wiring, electrical, electronic components, pipe systems and plumbing, machinery
- Maintenance management experience including planning, scheduling, budgeting, negotiating, parts management, vendor management and with maintenance management systems
- Ability to read maintenance literature printed in English
- Experience with blueprints and ability to read blueprints
- Proficiency with Microsoft Office (Word, Excel, Outlook) and intranet/internet
- Ability to stand for up to 7 hours of an 8 hour shift.
- Ability to be on call 24 hours per day
- High School Diploma/GED
Preferred
- Boiler knowledge
- HVAC experience
- Prior experience and ability to perform welding activities including MIG, TIG, ARC, cutting and brazing
- Reliability certification such as CPMM or CRMP
Our employee-partners enjoy:
- Competitive Pay
- Weekly Pay Cheques
- RRSP and DPSP Contribution
- Medical, Dental & Vision Insurance Package
- Disability & Life Insurance Package
- Paid Vacation & Holidays
- Career Advancement Opportunities
Maintenance Supervisor
Cintas Corporation
Scarborough Village - 11.35kmMaintenance & Repair Full-time
Learn More
Construction electricians foreman/woman | LMIA Approved Full-time Job
BASE International Traders Inc.
Maintenance & Repair Scarborough VillageJob Details
Requirements:
Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as College, CEGEP, or other non-university certificate or diploma from a program of 1 year to 2 years or equivalent experience
Experience: Candidates should have experience of 1 to less than 2 years
Candidate Status:
- Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position.
- International Candidates who don’t have a valid Canadian work permit also can apply
Benefits:
- The candidates will get on-site amenities, team-building opportunities, and free parking
How to apply:
If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume, references attesting to experience, copy of portfolio or relevant work examples, and the highest level of education and name of the institution where it was completed) through below-mentioned details.
In-person
1845 Birchmount Rd Unit 3-4
Scarborough, ON
M1P 0B8
Between 12:00 PM and 05:00 PM
Be prepared for the screening questions. Include answering the following questions while applying:
- Are you available for shift or on-call work?
- Are you currently legally able to work in Canada?
- Are you willing to relocate for this position?
- Do you currently reside in proximity to the advertised location?
- Do you have previous experience in this field of employment?
- What is the highest level of study you have completed?
- What is your current field of study?
Construction electricians foreman/woman | LMIA Approved
BASE International Traders Inc.
Scarborough Village - 11.35kmMaintenance & Repair Full-time
31
Learn More
Welder Full-time Job
Maintenance & Repair Woodbine CorridorJob Details
Requirements:
Languages: Candidates must have knowledge of the English Language
Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates should have experience of 1 to less than 2 years
Candidate Status:
- Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
- Candidate must have legal authorization (Work Permit) to work in Canada
- If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position
Responsibilities:
- The candidates should be able to operate manual or semi-automatic, fully automated welding equipment, read and interpret welding blueprints, drawings specifications, manuals, and processes, and operate oxygen arc cutting equipment (arc-air) (AOC)
Benefits:
- The candidates will get dental plan, disability benefits, health care plan, and other benefits
How to apply:
If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details
By email
[email protected]
Welder
Alps Welding Ltd
Woodbine Corridor - 11.38kmMaintenance & Repair Full-time
25
Learn More
General Repair Technician II Full-time Job
Maintenance & Repair MarkhamJob Details
The General Repair Technician II is a mid entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility components (i.e. walls, floors, etc.). The Technician II is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.
KEY DUTIES & RESPONSIBILITIES
Troubleshooting
- Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.
Maintenance
- Performs work in accordance to established processes and practices.
- Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
- Performs regular facility technical and non-technical component monitoring and inspection.
- Responds to routine service requests and performs preventative and corrective maintenance.
- Operates facility mechanical, electrical and other systems
- Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements
- Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.
Client Relations
- Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.
Administration
- Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
- Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database. Initiates documents to obtain formal approval of work required
- Participates in and assists with facility-related projects.
- Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
- Maintains all assigned tools and arranges for repair and replacement where required
- Submits all expenditures on a timely basis.
- Other duties as assigned
KNOWLEDGE & SKILLS
- High school diploma or equivalent
- Minimum 3 years of facility operations and maintenance work experience
- Knowledge of processes and practices relating to facility operations and maintenance
- Ability to maintain, troubleshoot and repair non-technical facility components
- Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair
- Ability to research, learn, and gain greater proficiency in applying on-the-job—fire, life, and building codes and standards
- Possesses a strong environment, health and safety mindset. Ability to perform work in a safe manner
- Strong client-service orientation along with a high sense of urgency
- Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
- Basic knowledge and understanding of Building Automation Systems (BAS)
- Ability to read understand and interpret technical drawings and information
- Self-motivated
- Computer literacy
- Demonstrated maintenance and repair skills
- Must be able and willing to work shifts, be available for on-call/stand-by and emergency call outs as they arise
- Must be willing to wear personal protective equipment
- Must meet enhanced security clearance requirements
- Valid drivers’ license
Licenses and/or professional accreditation
- Demonstrate an interest in obtaining a diploma or a certificate, or be in the process of obtaining one.
- Meet the requirements for a higher security clearance.
- Any one of the following are considered an asset:
- Building Operator Certification or equivalent through an accredited institution preferred
- Building Systems Maintenance Certificate (SMC)
- Systems Maintenance Administrator (SMA)
- Systems Maintenance Technician (SMT)
- Facilities Technician Certification
- Working towards a trade license, an asset
- Working towards Building Environment Systems (BES) Operation Class 1
General Repair Technician II
BGIS
Markham - 11.89kmMaintenance & Repair Full-time
Learn More
Maintenance Technician III Full-time Job
Maintenance & Repair MarkhamJob Details
General Repair Technician III is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.
KEY DUTIES & RESPONSIBILITIES
Troubleshooting
• Provides observations about residential houses, mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.
Maintenance
- Performs work in accordance with established processes and practices.
- Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
- Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
- Responds to routine and on-demand service requests and performs preventative and corrective maintenance on residential equipment and other systems.
- Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
- Operates facility mechanical and other systems
- Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements
- Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.
Client Relations
- Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.
.
Administration
- Participates in and assists with facility-related projects.
- Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements.
- Maintains all assigned tools and arranges for repair and replacement where required
- Submits all expenditures on a timely basis.
- Ability to research, learn and gain greater proficiency in applying on-the-job – fire, life, safety and building codes and standards.
- Create scopes of work for various residential repairs / renovations.
- Other duties as assigned
EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS
- High school diploma plus trades training and/or certification or licensing.
- Minimum 3 years experience in residential construction and maintenance.
- Sound knowledge of processes and practices relating to residential maintenance
- Ability to create a quality scope or work, engage with contractors and follow up on the progress of work to completion.
- Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment.
- Possesses a strong environmental, health, and safety mindset.
- Strong client-service orientation along with a high sense of urgency
- Knowledge and understanding of HVAC Systems, residential plumbing, or water wells and septic systems.
- Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
- Mentoring skills required to support lower level technician’s development
- Must be available for on-call/standby and emergency call-outs as they arise
- Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
- Must be capable of obtaining appropriate security clearance
- Hold a valid driver's license
Licenses and/or Professional Accreditation (one of the following bullet points)
- Demonstrates an interest in enrolling and completing a trades certification or license, or beginning to work towards a trades certification or license
- Must meet enhanced security clearance requirements
- Valid drivers’ license
Maintenance Technician III
BGIS
Markham - 11.89kmMaintenance & Repair Full-time
Learn More
Fleet Maintenance Foreman Full-time Job
Maintenance & Repair Downsview-Roding-CFBJob Details
Cintas is seeking a Fleet Maintenance Foreman. Responsibilities include leading and overseeing a group of technician through the completion of repairs and daily preventative maintenance on trucks, cars, small engines and other heavy-duty applications; managing all daily shop activities including repairs, administration, organization, planning and scheduling; monitoring quality control; warranty repairs; evaluating maintenance, repair services and technicians; handling emergency breakdowns, towing, outsourcing; managing vendor and customer relations; managing all fleet parts and supplies; planning. scheduling and assigning maintenance work/activities of the maintenance shop; arranging work schedules to accommodate employee absences/work load; supervising general automotive and truck maintenance, including, but not limited to, major and minor engine overhaul and tune up, transmission and differential repair, air and hydraulic brake work, front axle assemblies and suspension systems, lubrication and tire repair and replacement; proving training for diagnostic equipment; and providing safety and compliance training required by corporate policy.
Skills/Qualifications
Required
- High School Diploma/GED
- Completion of specialized courses in automotive and truck mechanics and apprenticeship
- 10+ years' experience as a technician
- 5+ years' shop supervisory experience
- Valid 310S and 310T certificate of qualification license
- Welding, machining, electrical, air and hydraulic brakes, overhaul and rework of trucks, machine work experience
- Possess a valid driver's license in good standing
Preferred
- Medium and heavy-truck repair experience
Our employee-partners enjoy:
- Competitive Pay
- Weekly Pay Cheques
- RRSP and DPSP Contribution
- Medical, Dental & Vision Insurance Package
- Disability & Life Insurance Package
- Paid Vacation & Holidays
- Career Advancement Opportunities
Fleet Maintenance Foreman
Cintas Corporation
Downsview-Roding-CFB - 12.54kmMaintenance & Repair Full-time
Learn More
Truck Mechanic Assistant Full-time Job
Maintenance & Repair Downsview-Roding-CFBJob Details
Cintas is seeking a Truck Mechanic Assistant to help manage the safety and efficiency of the location's vehicle fleet. At Cintas, we pride ourselves on the professional appearance and maintenance of our fleet and on providing vehicle safety for our team of Route Drivers. The Truck Mechanic Assistant will move trucks at the facility or vendor. Responsibilities include assisting in providing on-site repair of company vans and gasoline and diesel trucks, to include: oil and fluid changes, tune-ups, state and Department of Transportation compliance inspections and major service repairs.
Skills/Qualifications
Required
Qualified candidates must meet all requirements outlined by Provincial requirements for driving a regulated vehicle weighing more than 10,000 lbs. In order to comply with Provincial requirements, qualified candidates must, prior to their first day of employment:
- Possess a valid driver's license in good standing
Preferred
- High School Diploma/GED
- Availability to start within two weeks after offer made/accepted
Our employee-partners enjoy:
- Competitive Pay
- Weekly Pay Cheques
- RRSP and DPSP Contribution
- Medical, Dental & Vision Insurance Package
- Disability & Life Insurance Package
- Paid Vacation & Holidays
- Career Advancement Opportunities
Headquartered in Cincinnati, Cintas is a publicly held company traded over the Nasdaq Global Select Market under the symbol CTAS and is a component of both the Standard & Poor’s 500 Index and Nasdaq-100 Index.
Truck Mechanic Assistant
Cintas Corporation
Downsview-Roding-CFB - 12.54kmMaintenance & Repair Full-time
Learn More
Truck Mechanic Assistant Full-time Job
Maintenance & Repair Downsview-Roding-CFBJob Details
Cintas is seeking a Truck Mechanic Assistant to help manage the safety and efficiency of the location's vehicle fleet. At Cintas, we pride ourselves on the professional appearance and maintenance of our fleet and on providing vehicle safety for our team of Route Drivers. The Truck Mechanic Assistant will move trucks at the facility or vendor. Responsibilities include assisting in providing on-site repair of company vans and gasoline and diesel trucks, to include: oil and fluid changes, tune-ups, state and Department of Transportation compliance inspections and major service repairs.
Skills/Qualifications
Required
Qualified candidates must meet all requirements outlined by Provincial requirements for driving a regulated vehicle weighing more than 10,000 lbs. In order to comply with Provincial requirements, qualified candidates must, prior to their first day of employment:
- Possess a valid driver's license in good standing
Preferred
- High School Diploma/GED
- Availability to start within two weeks after offer made/accepted
Our employee-partners enjoy:
- Competitive Pay
- Weekly Pay Cheques
- RRSP and DPSP Contribution
- Medical, Dental & Vision Insurance Package
- Disability & Life Insurance Package
- Paid Vacation & Holidays
- Career Advancement Opportunities
Truck Mechanic Assistant
Cintas Corporation
Downsview-Roding-CFB - 12.54kmMaintenance & Repair Full-time
Learn More
Maintenance Coordinator Full-time Job
Maintenance & Repair VaughanJob Details
Work Location: 7540 Jane Street, Vaughan, Ontario
Educational Requirements:
Degree or Diploma in Mechanical / Electrical Engineering
Required Knowledge:
Good knowledge in maintenance activities in a manufacturing factory.
Must have some experience in PM,
Breakdown coordination activities. Knowledge of maintaining CMMS for maintenance activities.
Preventive Maintenance Program
Microsoft Office (Excel, Word, PowerPoint)
Experience:
Trained in Mechanical Maintenance and Maintenance Coordinator
Proven experience in maintenance coordination in and industrial organization.
Job Description:
Reporting to Maintenance Supervisor, the Maintenance Technician’s responsibilities will include:
Orders and tracks parts and deliveries for all the Capexes and equipment we have
Runs PM system ready for customer or ISO audits
Runs Maintenance software
Takes repair calls from office or other service calls, like broken door, cracked concrete patch etc.
Read and interpret blueprints and drawings to determine breakdown issues and/or to order necessary parts.
Conduct and perform planned preventive & predictive maintenance and keep maintenance records.
Minimize production downtime by responding to production calls promptly.
Participate in spare parts control system and follow all department rules and regulations.
Support to dismantle and assemble equipment, tools and machines for repair.
Comply with all regulations relating to equipment for a manufacturing facility.
Record keeping of all maintenance of all activities on a daily basis.
Respond to shop floor requests for problem solving assistance.
Perform other duties as assigned.
To apply
please email Nancy Barrett at [email protected]
Maintenance Coordinator
Mobile Climate Control Canada
Vaughan - 13.76kmMaintenance & Repair Full-time
Learn More
Millwright Full-time Job
Coca-Cola Canada Bottling Limited
Maintenance & Repair VaughanJob Details
Coke Canada Bottling Maintenance Mechanics provide competent and effective maintenance support to plant operations. The Mechanic will identify, troubleshoot, and repair problems in mechanical systems within production equipment and processes. Execute electrical and diagnostics test and other tasks as needed. This role also performs preventive maintenance and systems upgrades.
Responsibilities
- Performs preventive maintenance on all mechanical/electrical systems and equipment; this includes disassembly, cleaning, reassembly, and calibration.
- Analyzes test results, machine error messages, and information obtained from operators; troubleshoot/diagnose equipment and system problems based on data received.
- Repairs and maintains the operating condition of production equipment, including reassembly of parts after completion of repair, testing, or inspection.
- Continuously improves technical skills to remain current on equipment installation and operations, including the set-up and programming processes.
- Utilizes welding skills to cut and weld metal for parts repairs, fabrication, and assembly of new equipment.
- Provides operations demonstrations on production equipment for new machine operators; communicates the various safety, control, and operating features in a clear and concise manner.
- Enters repair and maintenance data performed daily into SAP system using proper damage codes.
- Communicates potential mechanical hazards on equipment to appropriate leadership and operators.
- Coordinates completion of work orders with cross-functional team members, to ensure cost-effectiveness and productivity standards are met.
- Ensures that any safety related work orders are given a top priority in operations, ensuring adherence to Provincial and Federal regulations as well as company policy and procedures.
- Supports continuous improvement initiatives for operations and Coke Canada Bottling as a whole.
- Provides recommendations on preventative maintenance programs for applicable equipment and improvement opportunities for systems functionality.
- Performs other tasks and special assignments as requested by management.
Qualifications
- High School Diploma or GED required
- Minimum of two years of work experience required
- Prior experience in the role or equal vocational and technical training
- Maintenance background should consist of hydraulics, controls, welding, electrical, PLCs, machine tools and pneumatics
- Working knowledge of hand, power, and electrical testing tools
- Ability to read and understand one-line diagrams, blueprints, and schematics
- Strong computer application skills, including Word, Excel, PowerPoint, and SAP
- Capable of identifying defective parts and malfunctions in the production equipment and processes
- Excellent problem-solving and analytical skills; ability to work collaboratively and effectively with other departments
- Understanding and practice of all tasks in a safe manner, ensuring achievement of quality, service, and cost objectives
- Knowledge of TPM (Total Preventative Maintenance)/AM (Autonomous Maintenance) Pillar Tools including preferred.
- Prior experience with LEAN principles
Millwright
Coca-Cola Canada Bottling Limited
Vaughan - 13.76kmMaintenance & Repair Full-time
Learn More
