All jobs within 50 km around Etobicoke West Mall in Maintenance & Repair

The Maintenance Technician III supports the FedEx industrial maintenance of material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial maintenance related systems. May troubleshoot component and systems issues.

ESSENTIAL FUNCTIONS

• Under minimal supervision, provides preventative and predictive maintenance, troubleshooting and repair of material handling systems through demonstrated proficiency in mechanical power transmission and electrical with working knowledge of PLC/controls and welding/fabrication
• Adheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concerns
• Will interpret electrical or mechanical schematics, manufacturer’s manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalation
• Responds to sort calls to diagnose problems and make repairs
• Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data
• Complex skills required in diagnosing and troubleshooting mechanical, electrical and/or PLC/controls failures
• May rely on higher level Technicians in complex control systems issues
• May begin to read PLC and have the ability to burn EEPROMs
• May begin to assist lower level technicians
• May begin to develop scopes of work and project plans for small scale projects to be executed at a local level
• May be required to work a flexible schedule including all days and shifts as the business need dictates.
• Performs other duties as assigned

Examples of what you can expect to learn in the Tech III level (does not include all areas/responsibilities).

Mechanical

• Understand power transmission concepts, such as gear ratios, service factor, horsepower and frame size to repair/replace a failed gearbox and/or motor when the correct replacement parts are not available
• Understand mechanical design concepts to be able to replace failed pulleys and bearings with replacements that don’t match design without impacting performance of a conveyor (speed, torque, etc.)
• Can read, interpret and create or modify mechanical drawings

Electrical

• Use a digital multimeter to resistance test de-energized circuits.
• Troubleshoot and diagnose both the power and the control branch of motor controls circuits.
• Read, interpret and create or modify electrical drawings/schematics

PLC/Controls

• Go online with PLC processors to aid in troubleshooting
• Burn EEPROMs
• Understand PLC networks, such as ControlNet, DeviceNet, etc.

Welding or Fabrication

• MIG, stick and TIG weld in all positions.
• Understand difference between structural and non-structural welds and when to apply them
• Repair broken components where factors such as position or load may impact the repair, such as motor mounting plates or conveyor legs.
• Use vertical mill/drill and other machining tools

MINIMUM EDUCATION

• High School Diploma or GED required
• Certificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred.

MINIMUM EXPERIENCE

• Four (4) years experience in Industrial Maintenance with proficiency in knowledge and demonstrated skills in mechanical power transmission, electrical and working knowledge of PLC/Controls and welding/fabrication skills through job experience, related military experience and/or related education required.
• Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experience

KNOWLEDGE, SKILLS AND ABILITIES

• Ability to follow procedures as directed by work orders or high-level technicians/management
• Ability to interpret electrical or mechanical schematics, manufacturer’s manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalation
• Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data
• Ability to solve mechanical or electrical problems, which may include understanding of engineering formulas
• Ability to diagnose mechanical power transmission, electrical or PLC/controls issues by troubleshooting at multiple component and system level
• Effective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needs
• Need to collaborate successfully with department, operations, vendors and support teams that failures or projects may require
• Software skills, including Microsoft Office suite and other web-based applications

• Possess time management and organizational skills

JOB CONDITIONS

• Will need to use hand tools and possibly power tools
• May be working in hot or cold temperatures
• May need to stand, walk, bend, stoop and squat

Additional Details:Schedule: Monday - Friday or Sunday - Thursday 3:00PM - 11:30PM

• Location: 45 Di Poce Way, Woodbridge, ON L4H 4J4, Canada

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 1 to less than 2 years

Physical Requirements:

Other Requirements:

• The candidates should be able to demonstrate a client-focused approach and communicate excellently orally
• The candidates should be able to communicate excellently in writing and display flexibility in their work approach
• The candidates should be able to maintain punctuality in their work schedule and be hardworking in their role

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to interpret welding process specifications, read and interpret welding blueprints, drawings specifications, manuals, and processes, and determine the weldability of materials
• The candidates should be able to operate manual or semi-automatic, fully automated welding equipment, operate manual or semi-automatic flame-cutting equipment, and operate previously set-up welding machines to fabricate or repair metal parts and products
• The candidates should be able to examine welds and ensure that they meet standards and/or specifications, operate brakes, shears, and other metal shaping, straightening, and bending machines, and operate hoisting and lifting equipment
• The candidates should be able to operate previously set-up brazing or soldering machines to bond metal or to fill holes, indentations, and seams of metal, and maintain and perform minor repairs on welding, brazing, and soldering equipment

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates need experience of 3 years to less than 5 years

Physical Requirements:

• The candidate should be able to pay attention to detail and also for bending, crouching, kneeling
• The candidate should be physically strong

Other Requirements:

• • The candidate should be a team player

• • The candidate should have experience of equipment and machinery like Fans and blowers, Hydraulic system, Lathes and other machining tools, Pneumatic system, Power tools, Power transmission system, Pumps and compressors, Welding equipment and also Hand tools

• The candidate should have specialization on troubleshooting

Responsibilities:

• The candidate should be able to repair or replace defective machinery parts, operate machining tools to fabricate parts, assembling machinery and equipment (prior to installation) and also installing machinery and equipment
• The candidate should be able to read and interpret blueprints, maps, drawings and specifications and also operate hoisting and lifting equipment

Benefits:

• The employees get dental plan, disability benefits and health care plan
• The employees get as per collective agreement
• The employees get life insurance, other benefits and pension plan

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

• Number of Positions Open: 7
• Posting Period: 31-May-2024 to 28-Jun-2024

•  

• Location and Shift Information: 

• 1 Position - Island Water Treatment Plant, 446 Lakeshore Avenue
• 1 Position - Water Central Service Yard, 545 Commissioners Street
• 2 Positions - Ashbridges Bay Wastewater Treatment, 9 Leslie Street
• 1 position at Richview Pumping Station, 551 Martin Grove Road.
• 1 position at 435 Kipling Ave
• 1 position at John Street Pumping Station, 28 Reese

Toronto Water is a dynamic City of Toronto Division with talented employees who are committed to service excellence and take pride in providing high quality water services in a safe and environmentally friendly manner. We offer careers that make a difference in the lives of more than three million people living and working in the City of Toronto.

We are hiring electricians and offering an opportunity to upgrade their skill with a paid

on-the-job training program for instrumentation control leading to permanent employment as an Electrical Instrumentation Control Technician (EICT). More information about working for Toronto Water as an EICT is available here: https://www.toronto.ca/wp-content/uploads/2024/05/870e-A1603743-SPWDElectricalInstrumentTec-2024-FinalWeb.pdf

Major Responsibilities:

At Toronto Water, Electrical Instrumentation Control Technicians (EICTs) ensure the optimal performance of electrical/electronic instrumentation equipment, control devices and systems in various infrastructure sites throughout the city. They also work with advanced water systems to help provide clean, safe drinking water for Toronto residents and businesses or with advanced wastewater treatment systems to help protect public health and safety. EICTs are also responsible for the installation, maintenance, and repair of equipment.

• Performs skilled trade work and is responsible for electrical, electronic instrumentation equipment and control system overhauling, installation and maintenance of all processes in advanced Toronto Water facilities.
• Inspects, tests, records, monitors, and performs analysis, evaluation, selection, integration, installation and maintenance on electrical, electronic and instrumentation control devices and systems used in major Water/Wastewater facilities and ensures compliance to all regulatory requirements and procedures.
• Utilizes process operations, sampling and laboratory analysis results to interpret equipment performance. Performs laboratory tests, checks and calibration as required.
• Utilizes a number of different computerized software systems, such as Process Control System (PCS) involving a SCADA-based system as well as a Performance and Operations Management System (POMS), a Work Management System (WMS), a Statistical Process Control (SPC), a Laboratory Information Management System (LIMS), and other related technology.
• Makes timely decisions and addresses/responds to alarm conditions and emergencies.
• Provides, updates and maintains the required documentation of all work area electrical maintenance activities.
• Initiates and expedites material purchase orders, issues tracking and payment documents receives materials, maintains inventories and records using computerized systems.
• Trains, assists and supports skilled, semi-skilled, and unskilled staff as required. Fosters and supports a team environment.
• Assists in the maintenance and cleaning of work areas.

Key Qualifications:

Your application must describe your qualifications as they relate to:

1. Must be licensed in the Province of Ontario as an Electrician Construction and Maintenance (Licence 309A, Ontario College of Trades and Apprenticeship Act (OCTAA), 2009) or as an Industrial Electrician (Licence 442A, OCTAA, 2009). All Electrical Licences (309A or 442A) must be registered, valid and maintained with Skilled Trades Ontario (STO). Applicant name must match licence.
2. Experience in the operation, maintenance and repair of equipment for the generation and distribution of electrical energy at different voltages in an industrial environment. 
3. Completed program in Industrial Electronics/Instrumentations or equivalent practical experience in maintenance and calibration of process instruments and analyzers.
4. Experience in the utilization of computers, various software programs and applications, and the ability to make necessary calculations and interpret data.
5. Must possess and be able to maintain a valid Province of Ontario Class “G” licence and qualify for the City’s equipment operating permits and requirements, as determined by work location.

You must also have:

• Must obtain through examination by an agency recognized by the Ministry of the Environment, Conservation and Parks (MOECP), a valid Class 1 Operators Licence/Certificate in the appropriate discipline as per the applicable legislation within 90 days from employment start date. Should the incumbent be employed without holding any Operator Certification/Licence or an Operator-in-Training (OIT) Licence, they will be required to write and pass the Level 1 certification exam in the appropriate discipline within 90 days from their respective start date in this position.
• Knowledge of the maintenance, repair and troubleshooting of programmable controllers, remote terminal units and data communications circuits, pneumatic and hydraulic instrumentation.

• Understanding of the standard methods, technology, materials and tools used in Eelectrical/electronic/instrumentation control principles.
• Must be familiar with the Occupational Health and Safety Act, environmental legislation and the policies, procedures and regulations that apply to this work and have practical knowledge and be conversant with the current Ontario Electrical Safety Code and its practices.
• Ability to read, interpret and prepare layouts, diagrams, schematics and manuals.
• Knowledge of electrical controls and monitors as applied to programmable logic controllers, motor types, motor magnetic centers, lockouts and grounding.
• Knowledge of the processes, procedures and equipment used in automated process control in an industrial environment.
• Comfortable working in an industrial environment using hazardous chemicals.
• Strong interpersonal skills such as coaching, initiative, conflict resolution, problem solving, teamwork and an ability to effectively communicate both verbally and in writing.
• Strong analytical and problem-solving skills and interest in continuous learning and improvement.
• Must be available to work weekends/overtime/on call duty as needed as per Collective Agreement.

On-The-Job Training Program (Approximately 12 Months)

Should a successful candidate be employed without possessing the instrumentation
competencies required of this position, they will be required to progress through the various levels of the City's Toronto Water "EICT On the Job Training Program" by successfully passing the assessment requirements in accordance with the current training schedule.

Employees in this program shall receive the rates of pay applicable to the training rates for the EICT classification set out below:

• Training Rate 1: $41.24 (for first 6 months)
• Training Rate 2: $41.96 (6th to 9th months)
• Training Rate 3: $42.81 (after 9th months)
• Training Rate 4: $43.77 (after 12 months)

**This is a dayshift position 7:00am -7:00pm Wed to Fri for 2 weeks and Wed-Sat the 3rd week**

Responsibility

• Adhere to all safety policies and procedures; working in a safe and effective manner
• Perform service and preventative maintenance on all equipment within the DC
• Respond to all equipment breakdowns in a timely manner based on priority systems
• Maintain accurate parts and work order records (logged hours, Stores parts used, and detailed comments on failure cause/solution(s) or other relevant technical details) on computerized maintenance system (MAXIMO)
• Perform repairs with minimal supervision, take responsibility and make decisions to see the job to completion within time demands
• Troubleshoot electrical systems through the use of electrical schematics, personal computers, panel layouts or manufacturer's specifications to effect repair
• Provide information on equipment/system problems to coordinator and provide updates as required
• Provide required shift change hand-off information on equipment repairs or work orders to shift coordinator and incoming trades
• Make recommendations to improve equipment operation/efficiency, reduce maintenance costs and improve maintenance service to customers
• Demonstrate flexibility when tasks are reassigned or altered
• Follow maintenance quality and standard operating procedures as established

Qualifications

• MANDATORY - Current Ontario Certificate of Qualification (Industrial Electrician – 442A) or #309A Construction Electrician with relevant industrial experience
• Experience effectively troubleshooting equipment electrical/controls problems and investigating the root cause of such problems
• Experience in troubleshooting programmable controller (PLC) systems
• Knowledge of electrical and electronic equipment as well as various testing procedures to diagnose and repair/setup of such equipment
• Experience in the installation, trouble shooting and repair of DC Controllers and AC drives
• Photo Electrics
• Experience in working with computerized maintenance management software (CMMS)
• Ability to work at heights up to 100 feet
• Ability to stand for long periods with occasional laying down, stooping and crouching, plus frequent heavy lifting

Assets

• Experience working on conveyors, sortation equipment, towlines& cranes
• Detailed programming of PLCs and PLC systems
• Experience with Maximo
• Demonstrated ability to plan/execute own work effectively and efficiently
• Demonstrated ability to work effectively either alone or with other electricians
• Technical training via apprenticeship

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates need standard educational qualifications such as Registered Apprenticeship certificate or equivalent experience
Experience: Candidates should have experience of 1 to less than 2 years’

Location: Moose Creek, ON
Shifts: Day, Evening, Night, Weekend, Early Morning, Morning, 22:00 to 08:00

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position.
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to perform routine maintenance work on machinery
• The candidates should be able to installing machinery and equipment
• The candidates should be able to complete work orders, test and maintenance reports

Benefits:

• The candidates will get dental plan, health care plan, paramedical services coverage, disability benefits, free parking, on-site housing options, travel insurance, wellness program, and other benefits as per collective agreement

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume) through below mentioned details.

By email
[email protected]

The Industrial Electrician is responsible for achieving department and customer operation goals; ensuring ongoing equipment (system) reliability and uptime through preventative maintenance, breakdown repairs, troubleshooting, analysis and equipment upgrades.

*This is a full-time 12-hour shift 7p-7a (Sunday-Tuesday)

Responsibility

• Adhere to all safety policies and procedures; working in a safe and effective manner
• Perform service and preventative maintenance on all equipment within the DC
• Respond to all equipment breakdowns in a timely manner based on priority systems
• Maintain accurate parts and work order records (logged hours, Stores parts used, and detailed comments on failure cause/solution(s) or other relevant technical details) on computerized maintenance system (MAXIMO)
• Perform repairs with minimal supervision, take responsibility and make decisions to see the job to completion within time demands
• Troubleshoot electrical systems through the use of electrical schematics, personal computers, panel layouts or manufacturer's specifications to effect repair.
• Provide information on equipment/system problems to coordinator and provide updates as required
• Provide required shift change hand-off information on equipment repairs or work orders to shift coordinator and incoming trades
• Make recommendations to improve equipment operation/efficiency, reduce maintenance costs and improve maintenance service to customers
• Demonstrate flexibility when tasks are reassigned or altered
• Follow maintenance quality and standard operating procedures as established

Qualifications

• MANDATORY - Current Ontario Certificate of Qualification (Industrial Electrician – 442A) or #309A Construction Electrician with relevant industrial experience
• Experience effectively troubleshooting equipment electrical/controls problems and investigating the root cause of such problems
• Experience in troubleshooting programmable controller (PLC) systems
• Knowledge of electrical and electronic equipment as well as various testing procedures to diagnose and repair/setup of such equipment
• Experience in the installation, trouble shooting and repair of DC Controllers and AC drives
• Photo Electrics
• Experience in working with computerized maintenance management software (CMMS)
• Ability to work at heights up to 100 feet
• Ability to stand for long periods with occasional laying down, stooping and crouching, plus frequent heavy lifting

Assets

• Experience working on conveyors, sortation equipment, towlines& cranes
• Detailed programming of PLCs and PLC systems
• Experience with Maximo
• Demonstrated ability to plan/execute own work effectively and efficiently
• Demonstrated ability to work effectively either alone or with other electricians
• Technical training via apprenticeship

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as other trades certificate or diploma or equivalent experience
Experience: Candidates should have experience of 5 years or more
Equipment: Carpet cleaning machine, Power lawn mowers, Steam cleaners, Power tools

Location: Pickle Lake, ON
Work setting: Apartment/condominium complex, Various locations, Hotel, motel, resort
Asset languages: Ukrainian, Polish

Physical Requirements:

• • The candidates should be physically demanding
  • The candidates should be able to bend, crouch, and kneel for extended periods

• The candidates should be able to handle heavy loads

Other Requirements:

• The candidate should be dependable, organized, initiative, flexible, reliable, and judgmental
• The candidates should have excellent oral communication

Candidate Status:

• Canadian citizen and permanent or temporary foreign workers of Canada are eligible for this position.
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to make adjustments and minor repairs to heating, cooling, ventilation, plumbing and electrical systems, and contact tradespersons for major repairs
• The candidates should be able to perform minor repairs on appliances
• The candidates should be able to move heavy furniture, equipment and supplies
• The candidates should be able to perform other routine maintenance jobs such as painting and drywall repair
• The candidates should be able to water and tend to plants, lawns and/or gardens
• The candidates should be able to work with minimal supervision
• The candidates should be able to clean snow and ice from walkways and parking areas

Benefits:

• The candidates will get on-site recreation and activities, learning/training paid by employer, on-site housing options, health care plan, and other benefits

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume, copy of portfolio or relevant work examples, and cover letter) through below mentioned details.

By email
[email protected]

Reporting to the Manager, Maintenance Control, this position supports MOC, Cabin MOC and Technical Support for all administrative requirements. This position provides data entry support for TRAX data entry (Defects), enabling positive control and on time performance. This position also supports third party and internal technicians on TRAX functionality and Air Canada processes, as well as third party line maintenance contractors with their required data entry.

Responsibilities:

• Provide central point for Line Maintenance on a 24 hour around- basis for TRAX data entry (Defects) support.  
• Liaise with other Third-party technicians, internal departments, along with internal personnel as required to support TRAX update.
• Maintaining up to date Training profile and TRAX & Aircraft Defect Handling processes.
• Operational support for TRAX data entry (Defects), enabling positive control and on time performance.
• Liaise with internal Air Canada departments (receiving inspection, AOG, Stores, etc.) to enable positive control and on time performance.
• Provide administrative functions in Maintenance Operations Control to enable technical dispatch. 
• This position will provide assistance by supporting the Manager, MOC in the non-technical, administrative and transactional activities associated with MOC, Cabin MOC and Technical Support.
• Provide routine Defect update performance reporting, as well as ad hoc reports required to support the business.
• Liase with MOC Management to proactively respond to MOC staffing administrative requirements.
• Act as point of with employees for schedules/ change notifications.
• Responsible for the completion and accuracy of MOC employee time exceptions and to liaise with eservices to communicate employee status and schedules.
• Provide accurate and updated schedule changes information to MOC Management.
• Support the Managers with employee schedule development and identification of anticipated staffing issues and canvassing for overtime.
• Administrative support for AOG booking related to hotel booking, AOG bookings and reconciling invoices. 
• Working with software tools this position will track and report out on MOC employee training status as well as departmental and branch training compliance.

Qualifications

• College diploma, professional degree or equivalent work experience.
  
• Proven knowledge of TRAX, for example but not limited to: Part transactions, Defect deferral, and GMM TRAX requirements.
  
• Knowledge of TRAX & Aircraft Defect Handling is a definite asset.
  
• Proficiency with PC (Word, Excel, MS Outlook) is a definite asset.
  
• Ability to shift focus given changing priorities and time constraints.
  
• Willingness to work shifts and at times extended hours. 
  
• Demonstrate strong interpersonal skills and ability for teamwork. 
  
• Detailed oriented.
  
• Excellent English communication skills both (oral & written). 
  
• Ability to work with minimum supervision. 
  

Conditions of Employment:

• Candidates must be eligible to work in the country of interest, at the time any offer of employment is made and seeking any required work permits/visas or other authorizations which may be required is the sole responsibility of the candidates applying for this position.

Linguistic Requirements

Based on equal qualifications, preference will be given to bilingual candidates.

The Mobile Equipment Technician repairs all warehouse mobile equipment, including counterbalance, turret, reach and tugger trucks, propane-powered scissor lifts/booms and automated guided vehicles (AGVs).

•    Perform service and preventative maintenance on all mobile equipment within the D.C.
•    Maintain parts and work records on computerized maintenance system (MAXIMO)
•    Troubleshoot mobile equipment & systems using schematics, detailed drawings or manufacturer's specifications
•    Troubleshoot and Repair: electric motors and combustion engines, electrical battery charging systems and mobile equipment charging distribution systems, electrical vehicle control systems, vehicle power trains (power shift transmissions, torque converters, pumps and linkages), brake systems, steering systems, hydraulic systems, load masts and systems, and Automated Guided Vehicle controls and power systems.
•    Read blueprints, diagrams and schematic drawings to determine work procedures
•    Operate hoisting and lifting devices such as cranes, jacks and lift trucks to position machinery and parts during the installation, set-up and repair of mobile equipment
•    Inspect and examine mobile equipment to detect and investigate irregularities and malfunctions
•    Assist in other Maintenance department repairs as required while working in a safe and effective manner and adhere to all safety policies and procedures
•    Respond to truck breakdowns in a timely manner and perform repairs with minimal supervision, taking responsibility and decision making to see the job to completion within time demands
•    Follow Maintenance Quality and Standard Operating Procedures as established

What you bring:

•    Certificate of Qualification:
    Ontario Powered Lift Truck Technician (Ontario #282E) or
    Automotive Service Technician (Ontario #310S) and relevant experience or
    Heavy Duty Equipment Technician (Ontario #421A) and relevant experience 
•    Able to work at heights up to 45 feet, to stand for long periods with occasional laying, stooping and crouching and frequent heavy lifting up to 50 lbs.
•    Background or experience in electrical systems or electronics and demonstrated experience in vehicle repair and troubleshooting is an asset
•    Experience with computerized maintenance management system (CMMS) is an asset

Ability to work Wed/Thurs/Fri for 2 weeks and then Wed/Thur/ Fri/ Sat on the 3rd week (7:00pm-7:00am)
 

* Wage will consider skills and years of experience; plus, a competitive signing bonus to the successful new/external qualified applicants, a generous Profit-Sharing program, and a competitive savings and total rewards program