All jobs within 50 km around Sainte-Anne-des-Plaines in Maintenance & Repair

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Registered Apprenticeship certificate or equivalent experience
Experience: Candidates need experience of 3 years to less than 5 years

Location: 61 Rue des Menuisiers Local 104, Sainte-Anne-des-Plaines, QC, J0N 1H0
Shifts: Day and Overtime
Work setting: In shop
Program title: Jobs for Ukraine
Program description: This employer has selected to promote this job through “Jobs for Ukraine”. Canadian citizens and permanent residents can still apply

Other Requirements:

• The candidate should be able to work with being focused on the client
• The candidate should be dependable, reliable and also a team player
• The candidate should have specialization on Electrical and electronic system, diesel engines, diagnostics, alignment, steering and suspension, Brake system, Hydraulic system, Fuel and emission system, Ignition and electrical system, drive train components, welding, truck-trailer repair and also Heating, ventilation and air conditioning (HVAC) system

Responsibilities:

• The candidate should be able to adjust, repair or replace parts and components of commercial transport truck systems, inspect and test mechanical units to locate faults and malfunctions, inspect motor in operation, road test motor vehicles and test automotive systems and components, adjust, repair or replace parts and components of automotive systems, adjust, repair or replace parts and components of truck-trailer systems, repair or replace mechanical units or components, test and adjust repaired systems to manufacturer’s specifications and also test and adjust units to specifications
• The candidate should be able to diagnose faults and malfunctions and confirm findings with supervisor to determine whether to repair or replace unit, perform scheduled maintenance service, complete reports to record problems and work performed and also review work orders and discuss work with supervisor

Benefits:

• The employees get dental plan, disability benefits, health care plan and paramedical services coverage
• The employees get group insurance benefits, life insurance, long-term care insurance, maternity and parental benefits and Registered Retirement Savings Plan (RRSP)
• The employees get learning/training paid by employer

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

Screening questions:

• Are you currently legally able to work in Canada?

To-do list

Training-Skills and experience required

• B.SC. or DEC in mechanical engineering or related discipline;
• 10 years of experience in maintenance supervision;
• Knowledge of Microsoft Office;
• Experience with maintenance management software;
• Technical analysis and planning skills;
• Good vision of the continuous improvement process;
• Ability to make decisions and solve problems;
• People management skills;
• Ability to react quickly in crisis situations;
• Attention to detail;
• Excellent communication and interpersonal skills;
• Bilingual: French and English (oral and written). English is required to communicate with suppliers and colleagues located outside Quebec. 

We thank all applicants for their interest in exploring employment opportunities with Maple Leaf Foods, however, only those selected for an interview will be contacted. Applicants may be subject to a background check and must meet security requirements for the position.

To-do list

Training-Skills and experience required

• B.SC. or DEC in mechanical engineering or related discipline;
• 10 years of experience in maintenance supervision;
• Knowledge of Microsoft Office;
• Experience with maintenance management software;
• Technical analysis and planning skills;
• Good vision of the continuous improvement process;
• Ability to make decisions and solve problems;
• People management skills;
• Ability to react quickly in crisis situations;
• Attention to detail;
• Excellent communication and interpersonal skills;
• Bilingual: French and English (oral and written).

Requirements:

Languages: Candidates must have knowledge of the English or French Language
Education: Candidates don’t need standard educational qualifications
Experience: Candidates don’t need experience although having experience is an asset

Physical Requirements:

• The candidates should be able to work in a fast-paced environment with attention to detail.
• The candidates should be able to stand for extended periods

Other Requirements:

• The candidate should be accurate, client focus, dependable, flexible, and be able to work as a team player

Responsibilities:

• The candidates should be able to adjust, repair or replace parts and components of commercial transport truck systems
• The candidates should be able to adjust, repair or replace parts and components of automotive systems
• The candidates should be able to adjust, repair or replace parts and components of truck-trailer systems
• The candidates should be able to diagnose faults and malfunctions and confirm findings with supervisor to determine whether to repair or replace unit
• The candidates should be able to repair or replace mechanical units or components, test and adjust repaired systems to manufacturer’s specifications, test and adjust units to specifications
• The candidates should be able to perform scheduled maintenance service
• The candidates should be able to complete reports to record problems and work performed, review work orders and discuss work with supervisor

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

Hourly wage: $28.50/hr

Hours per week: Between 40 and 60

Benefits after 3 months

Responsibilities

Reporting to the Operations Director, the Mechanic is responsible for the operations of this position, maintaining machinery, equipment and vehicles functional. His role is to perform the installation, maintenance and repairs, both electrical, mechanical, pneumatic and hydraulic, of the equipment and vehicles used at work. Do what is necessary to keep the garage clean and tidy at all times. The Mechanic performs all of the following functions;

• Ensures the optimal operational maintenance of all equipment and vehicles;
• Performs preventive maintenance on equipment according to established schedule. Performs various troubleshooting, repair and manufacturing tasks on equipment;
• Participates in equipment adjustments. Performs repairs written on work sheets left by drivers;
• Works from maintenance or manufacturing schedules, detailed drawings, sketches, specifications, manuals, or verbal and written instructions;
• Mechanically assembles machinery. Recommends possible modifications to equipment;
• Perform periodic maintenance operations such as oil changes, lubrication, brakes, tire rotations, etc.
• Organize your work according to requests and the availability of equipment to be repaired
• See to ordering the parts required for manufacturing and repairs as needed;
• Be aware of and work in accordance with current safety standards and regulations;
• May be called upon to train and provide coaching when required;
• Actively participates in improving the department's productivity, improving products and working methods.

SKILLS

Education and experience:

• DEP in heavy vehicle mechanics or other relevant training and experience;
• Mechanics: 1 year (Desired)

Competence profile:

• A minimum welding skill is required, any additional certifications or qualifications will be considered an asset;
• Any electrical knowledge will be considered an asset;
• Ability to work at heights, in confined spaces, and outdoors regardless of changing seasonal conditions;
• Must be able to work overtime when required;
• Know how to drive heavy manual trucks. Having a class 1 or 3 is an asset
• Must be available to be on call in the evenings and weekends on a rotating basis.
• English not required

Thank you for your interest. Only selected candidates will be contacted for an interview. Lafarge is committed to employment equity and encourages applications from women, visible minorities and persons with disabilities.

Requirements:

Languages: Candidates must have knowledge of the English or French Language
Education: Candidates don’t need standard educational qualifications
Experience: Candidates don’t need experience although having experience is an asset

Shifts: Day, Shift, Overtime, Early Morning, Morning
Transportation information: The candidates should have a valid driver’s license

Physical Requirements:

• The candidates should be able to work in a fast-paced environment with attention to detail.
• The candidates should be able to stand for extended periods

Other Requirements:

• The candidate should be accurate, client focus, dependable, flexible, and be able to work as a team player

Responsibilities:

• • The candidates should be able to adjust, repair or replace parts and components of commercial transport truck systems

• The candidates should be able to adjust, repair or replace parts and components of automotive systems
• The candidates should be able to adjust, repair or replace parts and components of truck-trailer systems
• The candidates should be able to diagnose faults and malfunctions and confirm findings with supervisor to determine whether to repair or replace unit
• The candidates should be able to repair or replace mechanical units or components, test and adjust repaired systems to manufacturer’s specifications, test and adjust units to specifications
• The candidates should be able to perform scheduled maintenance service
• The candidates should be able to complete reports to record problems and work performed, review work orders and discuss work with supervisor

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

The electrician is responsible for performing preventative and corrective maintenance, routine and on-demand services on facility mechanical and electrical equipment and systems for the assigned facility. The electrician is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

At this position level:

• Performs preventative and corrective maintenance on facility mechanical and electrical equipment and systems
• Trades certification or license in one or more of the following - required:
  • Journeyman level Electrician license (must be a member of the CCQ)

KEY DUTIES & RESPONSIBILITIES

Subject to legislative licensing requirements and company policy:

• Performs work in accordance to established processes and practices
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection
• Performs regular facility, facility mechanical and electrical equipment and systems monitoring and inspection, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained
• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides recommendations for enhancement and repair
• Monitors assigned facility by conducting facility walkthroughs, mechanical and electrical equipment and system monitoring and inspection
• Maintains, troubleshoots and repairs mechanical and electrical building systems and equipment
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on  facility mechanical and electrical equipment and systems
• Records resolution data within service maintenance management database.  Ensures work completed meets quality, contract response and all other requirements
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Assists in the implementation of preventative maintenance (PM) program.  Ensures that deficiencies are identified, recorded and escalated, and that related documentations are maintained
• Participates in facility-related projects
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis
• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered
• Other duties as assigned

Work Requirements

• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must be willing to wear personal protective equipment

The General Repair Technician III is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance with established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems.
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
• Operates facility mechanical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements. 
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years' experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems.
• Sound knowledge of processes and practices relating to facility operations and maintenance
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency
• Knowledge and understanding of Building Automation Systems (BAS)
• Knowledge and understanding of HVAC Systems 
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower-level technician’s development
• Must be able and willing to work shifts, be available for on-call/standby and emergency callouts as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Hold a valid driver's license

Licenses and/or Professional Accreditation (one of the following bullet points)

• Building Operator Certification or equivalent through an accredited institution required
• Provincial HVAC or apprentice license (ex: Gasfitter I & II license refrigeration license, etc.)

To-do list

Training-Skills and experience required

• DEP in mechanics or equivalent, an asset;
• 5 to 10 years of experience in industrial maintenance;
• Proficient in computer tools, in-depth knowledge of the Microsoft Office suite (Word, Excel, Outlook, PowerPoint) and maintenance planning software;
• Knowledge of Intéral software, an asset;
• Bilingual French / English, spoken and written;
• Be an excellent communicator;
• Good ability to work under pressure;
• Have a sense of organization, priorities and a taste for teamwork;
• Ability to manage multiple files at the same time;
• Good mechanical sense;
• Have good self-confidence; and enjoy challenges.

We thank all applicants for their interest in exploring employment opportunities with Maple Leaf Foods, however, only those selected for an interview will be contacted. Applicants may be subject to a background check and must meet security requirements for the position.

Maple Leaf Foods is committed to employment equity and maintaining a diverse workforce. Applicants with disabilities who require reasonable accommodation for any part of the application or hiring process may contact our Talent Acquisition team at [email protected] . Reasonable accommodations will be determined on a case-by-case basis and we will respond to your request as soon as possible.

Disclaimer: Please note that salaries posted on sites other than the Maple Leaf Foods Careers page are not reflective of Maple Leaf Foods and are an estimated salary range provided by the job site in question. Maple Leaf Foods offers competitive salaries and an attractive total compensation package which will be discussed during an interview with our Talent Acquisition team.

The Building Automation Specialist is responsible for the Building Automation Systems (BAS) and other controls in the building  including preventive and corrective maintenance, configuration modifications, programming, and developing and implementing optimization initiatives. They are also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Installation & Troubleshooting

• Responds to demand service requests for BAS/Control related issues to diagnoses and rectifies.
• Works with building operators and site managers to identify efficiencies and energy savings in building operations.
• Optimizes facility uptime and asset integrity of assigned facility.
• Develops recommendations for BAS system changes and implements approved changes which may include working with external control contractors for the programming.
• Performs commissioning inspections to transition projects from installation to an on-going operation.

Maintenance

• Performs systems monitoring, inspection, preventative, corrective and demand service maintenance on building automation/controls system (hardware and software), as well as energy management system and equipment and to ensure facility uptime, uninterrupted client operations, asset integrity, and energy and operating cost objectives are achieved.
• Ensures that the HVAC control strategy is stable and efficient.
• Ensures that the graphic user interface allows quick and accurate diagnostics. Works with vendor to implement improvements.
• Maintains, troubleshoots, repairs and optimizes building automation/controls systems and equipment. Also, may include work on security, surveillance and fire alarm systems.
• Oversees the overall implementation of BAS preventative maintenance program including vendor involvement. Ensures that deficiencies are identified, recorded and escalated, and that related documentation is maintained.
• Backups and maintains server platforms, both physical and virtual.
• Receives, actions, tracks, monitors and reports status of maintenance and repair work within the work order management system including progress notes and resolution notes.
• Monitors assigned facilities by conducting facility walkthroughs, building automation system monitoring and inspection of BAS interface as well as sequence of operation for optimization.
• Assists in the implementation of overall electrical/mechanical/fire protection preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documentations are maintained.
• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.

Client Relations

• Provides observations about facility building automation equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.
• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through way work is performed and services delivered.

Administration

• Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.
• Initiates documents to obtain formal approval of work required.
• Participates in and assists with facility-related projects.
• Maintains all assigned tools and arranges for repair and replacement where required.
• Submits all expenditures on a timely basis.
• Other duties as assigned.

KNOWLEDGE & SKILLS

• College OR University Degree/Diploma/Certification in HVAC, Controls, and/or Building Operations is desirable.
• Minimum of 5 years’ experience in the field of designing, installing, programming, and/or maintenance of automated control/energy management systems.
• Demonstrated experience with computers, computer networks and internet protocols.
• Familiar with integration concepts and platforms such as BACnet systems.
• Operational experience in fault detection platforms considered an asset
• Good knowledge of optimization and energy management strategy for BAS system.
• Strong ability to adhere and to properly execute processes and practices relating to facility operations and maintenance
• Current knowledge of fire, life, safety and building codes and standards and ability to research and apply related codes and standards, is desirable.
• Possesses a strong environmental, health and safety mindset. Ability to perform work in a safe manner.
• Strong client-service orientation along with a high sense of urgency.
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification.
• Mentoring skills required to support lower level technician’s development.
• Must be willing to wear Personal Protective Equipment.
• Must be available for on-call/standby and emergency callouts as they arise. Extended hours may be required.
• Bilingualism considered an asset.
• Valid drivers’ license.

License and/or Professional Accreditations

• None required