Job Summary: As a member of the BGIS SCS Team, you will be generally responsible for cleaning in a designated zone with an emphasis on quality control, health and safety & striving to exceed client expectations. 

Key Responsibilities: Functioning as a core member of the operational team and reporting to the Manager/ Supervisor as a Cleaner you may be required to perform some of the following tasks as required by the Manager/Supervisor and needs of the client:

• Clean floors by sweeping, scrubbing, or vacuuming
• Dry/wet mop (wash/scrub) and polish hard surface floors. (The washing/scrubbing of floors is done with handheld or auto scrubbers. In large open applications, automatic equipment may be used to perform these functions) 
• Strip and finish hard surface floors manually or with power equipment when required 
• Dry/wet mop (wash/scrub) and polish hard surface floors including washroom floors. (The washing/scrubbing of floors is done with handheld or walk behind buffing machines. In large open applications, automatic equipment may be used to perform these functions) 
• Transport garbage from drop points to garbage bins or compactor 
• Transport maintenance machinery, where necessary, between floors and job sites 
• Cleans and stores equipment and machinery used
• Cleans glass areas requiring ladders, scaffolding or other extension equipment to reach. 
• Cleans washroom floors including stripping and finishing 
• Cleans stairwells and elevator cabs where ladders are required 
• Loads and unloads supplies and replenishes cleaning solutions
• Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures
• Other duties that management may assign 
• Strip, seal, finish, and polish floors
• Strip and finish hard surface floors manually or with power equipment when required 
• Steam clean or shampoo carpets 
• Notify managers concerning the need for major repairs or additions to building operating systems
• Mix water and detergents in containers to prepare cleaning solutions, according to specifications
• Strip, seal, finish, and polish floors
• Steam clean or shampoo carpets
• Remove snow and debris from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow melting chemicals.

Job Requirements:

• Experience in performing various cleaning, housekeeping and maintenance activities in an institutionalized environment.
• Experience in using floor maintenance machines, cleaning equipment, materials and solutions.
•  Knowledge of the Occupational Health and Safety Act and the provisions that apply to this work including WHMIS.
• Ability to lift, push and pull heavy items as well as climb ladders.
• Excellent interpersonal skills with the ability to maintain cooperative working relationships with staff, clients and the general public.
• Ability and willingness to work weekends, holidays and shifts as assigned as well as work in multiple locations.
• Ability to follow verbal and written instructions, prepare and maintain manual and electronic records.

Licenses and/or Professional Accreditation

• Must meet security clearance requirements, where applicable
• Must have a valid Class G license (may be required)

 Physical demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The employee must occasionally lift and/or move up to 25 pounds. 

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

The Cleaning Supervisor is responsible for the effective operations of the cleaning service through planning, quality control and management all cleaners.   Supervisor is to set high standards for cleaning and to ensure those standards are maintained and achieve our customer Standard by the most economical use of materials, equipment and manpower.

KEY DUTIES & RESPONSIBILITIES

• Will be require to work with multiple Client accounts
• Provide a clean, safe and pleasant environment.
• Consult with BGIS Operations Manager and Facility Manager Administration regular basis, regarding the condition of the building.
• Provide information of staffing, special project tasks, work orders and the effectiveness of Housekeeping to maintain and provide with quality services. 
• Make decisions in matters of employment, training, discipline, termination of staff under his jurisdiction and report to Operations Manager and Facility Manager.
• Make independent decisions and consult with Operations Manager, as necessary, in the day-to-day operations of the BGIS Cleaning Service Department and keep documentations for overall benefit of the clients and BGIS.
• Maintain good communications with the Operations Manager and Facility Manager and Customer Administration.
• Consult with Operations Manager for specific projects and work orders and follow up on special project work.
• Supervise, training, motivating and developing personnel to achieve competence within the cleaning responsibilities.
• Supervise all aspects of cleaning to provide an atmosphere conductive to the comfort of the all clients staff and its clients.
• Manage and keep inventory of operating equipment and supplies.
• Analyze needs and recommend supplies and equipment.
• Analyze trends in equipment, materials and methods and recommend changes when these would benefit the client.
• Carry out daily quality assurance inspections.
• Complete payroll forms, variance records, cost control reports and supplies cost reports.
• Liaise daily with BGIS Operation Manager and Facility Manger.
• Set priorities in scheduling of project duties for Cleaning Staff.
• Prepare Daily, Weekly & Monthly reports for Operations Manager of BGIS Cleaning Services.
• Prepare monthly reports for submission to Administration.
• Conduct Monthly staff and training meetings.
• Requisition or purchase supplies and materials in advance.
• Record staff absenteeism and sickness.
• Inform Operations Manager and Facility Manager of his/her designate in the event of your absence.
• Conduct evaluation interviews for cleaning personnel
• Other duties as required

KNOWLEDGE & SKILLS

• Must be able and willing to days / evenings / weekends and be available for on-call / standby and emergency call-outs as they arise
• Experience of managing, communicating and motivating workforce teams
• Good communication skills
• Ability to organize and manage work programs
• 3-5 years or more of cleaning experience
• Flexible and willing attitude to working hours as overtime, nights and weekend on a rotation basis.
• Willingness to learn and acquire new skills
• Will solved problem through applying established procedures.
• High school diploma

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

Technician III is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

•    Provides observations about facility, facility mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance with established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems.
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
• Operates facility mechanical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements. 
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems.
• Sound knowledge of processes and practices relating to facility operations and maintenance
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency
• Knowledge and understanding of Building Automation Systems (BAS)
• Knowledge and understanding of HVAC Systems 
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technician’s development
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Hold a valid driver's license

Licenses and/or Professional Accreditation (one of the following bullet points)

• Building Operator Certification or equivalent through an accredited institution required
• Provincial HVAC or apprentice license (ex: Gasfitter I & II license  refrigeration license, etc.)

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

Job Summary: As a member of the BGIS SCS Team, you will be generally responsible for cleaning in a designated zone with an emphasis on quality control, health and safety & striving to exceed client expectations. 

Key Responsibilities: Functioning as a core member of the operational team and reporting to the Manager/ Supervisor as a Cleaner you may be required to perform some of the following tasks as required by the Manager/Supervisor and needs of the client:

• Clean floors by sweeping, scrubbing, or vacuuming
• Dry/wet mop (wash/scrub) and polish hard surface floors. (The washing/scrubbing of floors is done with handheld or auto scrubbers. In large open applications, automatic equipment may be used to perform these functions) 
• Strip and finish hard surface floors manually or with power equipment when required 
• Dry/wet mop (wash/scrub) and polish hard surface floors including washroom floors. (The washing/scrubbing of floors is done with handheld or walk behind buffing machines. In large open applications, automatic equipment may be used to perform these functions) 
• Transport garbage from drop points to garbage bins or compactor 
• Transport maintenance machinery, where necessary, between floors and job sites 
• Cleans and stores equipment and machinery used
• Cleans glass areas requiring ladders, scaffolding or other extension equipment to reach. 
• Cleans washroom floors including stripping and finishing 
• Cleans stairwells and elevator cabs where ladders are required 
• Loads and unloads supplies and replenishes cleaning solutions
• Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures
• Other duties that management may assign 
• Strip, seal, finish, and polish floors
• Strip and finish hard surface floors manually or with power equipment when required 
• Steam clean or shampoo carpets 
• Notify managers concerning the need for major repairs or additions to building operating systems
• Mix water and detergents in containers to prepare cleaning solutions, according to specifications
• Strip, seal, finish, and polish floors
• Steam clean or shampoo carpets
• Remove snow and debris from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow melting chemicals.

Job Requirements:

• Experience in performing various cleaning, housekeeping and maintenance activities in an institutionalized environment.
• Experience in using floor maintenance machines, cleaning equipment, materials and solutions.
•  Knowledge of the Occupational Health and Safety Act and the provisions that apply to this work including WHMIS.
• Ability to lift, push and pull heavy items as well as climb ladders.
• Excellent interpersonal skills with the ability to maintain cooperative working relationships with staff, clients and the general public.
• Ability and willingness to work weekends, holidays and shifts as assigned as well as work in multiple locations.
• Ability to follow verbal and written instructions, prepare and maintain manual and electronic records.

Licenses and/or Professional Accreditation

• Must meet security clearance requirements, where applicable
• Must have a valid Class G license (may be required)

Physical demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The employee must occasionally lift and/or move up to 25 pounds. 

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

This is a regular, part-time position with a wage range of $16.75 - $18.00 per hour. The starting salary will be based on the successful candidate's competencies, including but not limited to experience, education and performance related to this role.

The Maintenance Team Leader is responsible for overseeing a team of Technicians in the delivery of preventative and corrective maintenance, routine and on-demand services for assigned facilities.  The Maintenance Team Leader is responsible for overseeing the execution of activities performed by Technicians to ensure that work is performed in accordance to established processes and practices and is in compliant with all internal and external requirements including but not limited to environmental, health and safety, fire protection.  In addition to people leadership responsibilities, the Maintenance Team Leader also performs and delivers preventative and corrective maintenance as well as routine and on-demand services.

KEY DUTIES & RESPONSIBILITIES

People Leadership

• Leads a team of individual contributors
• Assigns, prioritizes and monitors work progress
• Monitors execution of activities and performance to ensure timely completion and adherence to all requirements including but not limited to operating procedures and practices, quality, performance and contract response requirements
• Guides, coaches and trains direct reports
• Provides input for performance review

Leads the delivery of as well as performs the following:

• Oversees and monitors the activities and performance of Technicians within assigned facility.  Ensures that activities are performed in accordance to established processes as well as internal and external requirements including but not limited to environmental, health and safety, fire protection
• Oversees the proper application and execution of processes and practices to ensure achievement of and adherence to all requirements
• Oversees and performs regular facility, facility mechanical and electrical equipment and systems monitoring and inspection, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.  Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides recommendations for enhancement and repair
• Oversees and monitors assigned facility by conducting facility walkthroughs, mechanical and electrical equipment and system monitoring and inspection
• Oversees and maintains, troubleshoots and repairs mechanical and electrical building systems and equipment
• Oversees and responds to routine and on-demand service requests and performs preventative and corrective maintenance on  facility mechanical and electrical equipment and systems
• Oversees the maintenance of as well as maintains work order records within service management maintenance database.  Initiates documents to  obtain formal approval of work required
• Coordinates and assists in the implementation of preventative maintenance program.  Ensures that deficiencies are identified, recorded and escalated, and that related documentations are maintained
• Coordinates and participates in facility-related projects
• Oversees and maintains all assigned tools and arranges for repair and replacement where required.  Submits all expenditures on a timely basis
• Provides, participates and supports training, safety meetings, operational meetings, tool box talks, etc.
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered
• Other duties as assigned

Work Requirements

• Must be able to work shifts, be on-call and be available to respond to emergencies
• Must be willing to wear personal protective equipment

KNOWLEDGE AND SKILLS

• 5 years of facility operations and maintenance work experience
• Previous people leadership experience, preferred
• High school diploma plus trades training and certification
• Ability to lead a team of individuals
• Highly-advanced ability to adhere to processes and practices relating to facility operations and maintenance
• Highly-advanced ability to maintain and repair building mechanical and electrical equipment and systems
• Highly-advanced building mechanical and electrical equipment and system  troubleshooting and resolution skills
• Current knowledge of fire, life, safety and building codes and standards and ability to research and apply related codes and standards
• Possesses a high level of environmental, health and safety mindset.  Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification

Licenses and/or Professional Accreditation

One or more of the following:

• Journeyman level Refrigeration license
• Journeyman level Electrical license
• Journeyman level Plumbing license
• Power Engineering 3rd Class or 4th Class
• Building Operator Certification
• Gasfitter I or II
• Systems Maintenance Administration Certification considered an asset

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

Job Summary: As a member of the BGIS SCS Team, you will be generally responsible for cleaning in a designated zone with an emphasis on quality control, health and safety & striving to exceed client expectations. 

Key Responsibilities: Functioning as a core member of the operational team and reporting to the Manager/ Supervisor as a Cleaner you may be required to perform some of the following tasks as required by the Manager/Supervisor and needs of the client:

• Clean floors by sweeping, scrubbing, or vacuuming
• Dry/wet mop (wash/scrub) and polish hard surface floors. (The washing/scrubbing of floors is done with handheld or auto scrubbers. In large open applications, automatic equipment may be used to perform these functions) 
• Strip and finish hard surface floors manually or with power equipment when required 
• Dry/wet mop (wash/scrub) and polish hard surface floors including washroom floors. (The washing/scrubbing of floors is done with handheld or walk behind buffing machines. In large open applications, automatic equipment may be used to perform these functions) 
• Transport garbage from drop points to garbage bins or compactor 
• Transport maintenance machinery, where necessary, between floors and job sites 
• Cleans and stores equipment and machinery used
• Cleans glass areas requiring ladders, scaffolding or other extension equipment to reach. 
• Cleans washroom floors including stripping and finishing 
• Cleans stairwells and elevator cabs where ladders are required 
• Loads and unloads supplies and replenishes cleaning solutions
• Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures
• Other duties that management may assign 
• Strip, seal, finish, and polish floors
• Strip and finish hard surface floors manually or with power equipment when required 
• Steam clean or shampoo carpets 
• Notify managers concerning the need for major repairs or additions to building operating systems
• Mix water and detergents in containers to prepare cleaning solutions, according to specifications
• Strip, seal, finish, and polish floors
• Steam clean or shampoo carpets
• Remove snow and debris from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow melting chemicals.

Job Requirements:

• Experience in performing various cleaning, housekeeping and maintenance activities in an institutionalized environment.
• Experience in using floor maintenance machines, cleaning equipment, materials and solutions.
•  Knowledge of the Occupational Health and Safety Act and the provisions that apply to this work including WHMIS.
• Ability to lift, push and pull heavy items as well as climb ladders.
• Excellent interpersonal skills with the ability to maintain cooperative working relationships with staff, clients and the general public.
• Ability and willingness to work weekends, holidays and shifts as assigned as well as work in multiple locations.
• Ability to follow verbal and written instructions, prepare and maintain manual and electronic records.

Licenses and/or Professional Accreditation

• Must meet security clearance requirements, where applicable
• Must have a valid Class G license (may be required)

 Physical demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The employee must occasionally lift and/or move up to 25 pounds. 

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

The General Repair Technician II is a mid entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility components (i.e. walls, floors, etc.). The Technician II is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility technical and non-technical component monitoring and inspection.
• Responds to routine service requests and performs preventative and corrective maintenance.
• Operates facility mechanical, electrical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.

Administration

• Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

KNOWLEDGE & SKILLS

• High school diploma or equivalent
• Minimum 3 years of facility operations and maintenance work experience
• Knowledge of processes and practices relating to facility operations and maintenance
• Ability to maintain, troubleshoot and repair non-technical facility components
• Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair
• Ability to research, learn, and gain greater proficiency in applying on-the-job—fire, life, and building codes and standards
• Possesses a strong environment, health and safety mindset. Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Basic knowledge and understanding of Building Automation Systems (BAS)
• Ability to read understand and interpret technical drawings and information
• Self-motivated
• Computer literacy
• Demonstrated maintenance and repair skills
• Must be able and willing to work shifts, be available for on-call/stand-by and emergency call outs as they arise
• Must be willing to wear personal protective equipment
• Must meet enhanced security clearance requirements
• Valid drivers’ license

Licenses and/or professional accreditation 

• Demonstrate an interest in obtaining a diploma or a certificate, or be in the process of obtaining one.
• Meet the requirements for a higher security clearance.
• Any one of the following are considered an asset:
  • Building Operator Certification or equivalent through an accredited institution preferred
  • Building Systems Maintenance Certificate (SMC)
  • Systems Maintenance Administrator (SMA)
  • Systems Maintenance Technician (SMT)
  • Facilities Technician Certification
  • Working towards a trade license, an asset
  • Working towards Building Environment Systems (BES) Operation Class 1

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds . We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

The Intermediate Financial Analyst (FA II) provides complex transactional support for a process within an accounting cycle and/or full cycle accounting support. Understands the impact of transactions on financial results and can be proactive to recommend necessary actions and can communicate with stakeholder about transactions, processes and analysis. Provides analysis for areas such as planning, forecasting, reporting and audit and process improvements.
 

KEY DUTIES & RESPONSIBILITIES 
 

Treasury Management

• Supporting in opening and closing bank accounts.
• Updating and documenting user access and privileges for each online banking platform.
• Coordinating surety bonds and letters of credit on an ad hoc basis.
• Setting up transactions within each online banking platform on an ad hoc basis.

Accounting

• Intermediate transactional support for a process within an accounting cycle.
• Ability to complete and resolve assigned intermediate account reconciliations independently.
• Identifies complex issues and resolves basic transactional accounting discrepancies.

Accounting Policy

• Understand GAAP requirements relevant to the financial cycle or portfolio supported.

Audit Support and Controls

• Intermediate understanding of internal/client control requirements.
• Maintains accurate and complete records for audits.
• Gathers audit support data upon request.

Financial Systems

• Intermediate level knowledge of current accounting systems and MS Office suite of software.
• Basic understanding and ability to document the transactional and financial data flows between relevant financial systems.
• Able to work with IT and operational teams on intermediate system setups.

Planning / Forecasting

• Prepares standard forecasts (internal and external) with the appropriate back-up (including assumptions and calculations).
• Responsible for partnering with internal stakeholders in preparation of standard forecasts.

Analysis

• Prepares in-depth financial analysis (recurring and ad-hoc) and makes recommendations to Internal Stakeholders.

Reporting

• Preparation of internal reports.
• Provide input and support for external reports.
• Prepares basic business cases and provides input to intermediate business cases.

Scope/Complexity

• Single, high volume or multiple, low volume portfolios.
• With some complex transactions.

Interaction with Stakeholder

• Some Stakeholder interaction with transactional level data and for the purpose of Stakeholder reporting.
• Generate transactional data and ad-hoc analysis to support operational decision making, with recommendations.

Financial Management / Contract Interpretation

• Basic understanding of financial obligations of portfolio.
• Ensures delivery of contract/portfolio deliverables of a financial nature in a timely and efficient manner, in areas of less complexity.
• Supports the monitoring of performance and assists in action plans.
• Seeks guidance on contract/portfolio financial terms and conditions for assigned accounts.

Process Adherence / Implementation

• Understand intermediate business processes and ensures compliance and ensures appropriate documentation.
• Can identify and escalate gaps.

Problem Solving

• Identification of basic issues or discrepancies.

Technical and Business Knowledge

• Has gleaned a basic understanding of the industry and business which they support.
• Has established professional working relationships with operational counterparts in support of transactional processes.

KNOWLEDGE & SKILLS

• Ability to identify complex and resolve basic transactional accounting discrepancies.
• College/University graduation or professional certification (e.g., CPA, CMA, CGA or equivalent courses).
• Minimum of 3-5 years of work-related experience.
• Ability to identify and recommend process improvement opportunities at an account level following GAAP procedures.
• Ability to communicate basic accounting principles to support procedures and to explain financial results within the team and to internal customers.
• Ability to prepare memos, provide variance explanations and input to process documentations, and write summaries of findings and recommendations.
• Intermediate level knowledge of current accounting systems and MS Office suite of software.

Licenses and/or Professional Accreditation

• Registered in an Accounting designation program (CGA, CMA).

BGIS is an equal opportunity employer and we welcome you to apply for a position with us! If you require accommodation during the recruitment process, please contact us at askHR. Upon request for accommodation, we will consult with the applicant in question and provide, or arrange for the provision of, a suitable accommodation in a manner that takes into account the applicant’s accessibility needs due to disability.

The Technician III is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance with established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems.
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
• Operates facility mechanical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements. 
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned
• EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS
• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems.
• Sound knowledge of processes and practices relating to facility operations and maintenance
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency
• Knowledge and understanding of Building Automation Systems (BAS)
• Knowledge and understanding of HVAC Systems 
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technician’s development
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Hold a valid driver's license

Licenses and/or Professional Accreditation (one of the following bullet points)

• Power Engineer 5th Class as minimum requirement
• Power Engineer 4th Class considered a strong asset
• Building Operator Certification or equivalent through an accredited institution required
• Provincial HVAC or apprentice license (ex: Gasfitter I & II license  refrigeration license, etc.) considered an asset

Job Summary: As a member of the BGIS SCS Team, you will be generally responsible for cleaning in a designated zone with an emphasis on quality control, health and safety & striving to exceed client expectations. 

Key Responsibilities: Functioning as a core member of the operational team and reporting to the Manager/ Supervisor as a Cleaner you may be required to perform some of the following tasks as required by the Manager/Supervisor and needs of the client:

• Clean floors by sweeping, scrubbing, or vacuuming
• Dry/wet mop (wash/scrub) and polish hard surface floors. (The washing/scrubbing of floors is done with handheld or auto scrubbers. In large open applications, automatic equipment may be used to perform these functions) 
• Strip and finish hard surface floors manually or with power equipment when required 
• Dry/wet mop (wash/scrub) and polish hard surface floors including washroom floors. (The washing/scrubbing of floors is done with handheld or walk behind buffing machines. In large open applications, automatic equipment may be used to perform these functions) 
• Transport garbage from drop points to garbage bins or compactor 
• Transport maintenance machinery, where necessary, between floors and job sites 
• Cleans and stores equipment and machinery used
• Cleans glass areas requiring ladders, scaffolding or other extension equipment to reach. 
• Cleans washroom floors including stripping and finishing 
• Cleans stairwells and elevator cabs where ladders are required 
• Loads and unloads supplies and replenishes cleaning solutions
• Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures
• Other duties that management may assign 
• Strip, seal, finish, and polish floors
• Strip and finish hard surface floors manually or with power equipment when required 
• Steam clean or shampoo carpets 
• Notify managers concerning the need for major repairs or additions to building operating systems
• Mix water and detergents in containers to prepare cleaning solutions, according to specifications
• Strip, seal, finish, and polish floors
• Steam clean or shampoo carpets
• Remove snow and debris from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow melting chemicals.

Job Requirements:

• Experience in performing various cleaning, housekeeping and maintenance activities in an institutionalized environment.
• Experience in using floor maintenance machines, cleaning equipment, materials and solutions.
•  Knowledge of the Occupational Health and Safety Act and the provisions that apply to this work including WHMIS.
• Ability to lift, push and pull heavy items as well as climb ladders.
• Excellent interpersonal skills with the ability to maintain cooperative working relationships with staff, clients and the general public.
• Ability and willingness to work weekends, holidays and shifts as assigned as well as work in multiple locations.
• Ability to follow verbal and written instructions, prepare and maintain manual and electronic records.

Licenses and/or Professional Accreditation

• Must meet security clearance requirements, where applicable
• Must have a valid Class G license (may be required)

 Physical demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The employee must occasionally lift and/or move up to 25 pounds. 

The Maintenance Mechanic is responsible for inspecting, maintaining, and replacing filters and performing minor preventative maintenance on heating, ventilation, and air conditioning (HVAC) equipment on all client sites to maintain efficiency and mechanical integrity of HVAC units. This position is well-suited for graduates of a college or other post-secondary programs in HVAC studies. Minimum G3 Gas License required, G2 preferred.

KEY DUTIES & RESPONSIBILITIES

Essential duties and responsibilities include the following. Other duties may be assigned.

All routine maintenance and inspection regardless of size of location of the mechanical equipment being inspected or maintained, where this work is done as a periodic routine service inspection maintenance procedure by the employer, limited to:

• Filter Changing and maintenance thereof
• All oil and greasing
• All belt adjusting or replacement
• Cleaning of cooling towers, coils, evaporator and condenser tubes and water treatment
• Delivery of parts and equipment
• General housekeeping
• In the area where a problem exists with non-union competition, the assignment of Maintenance Mechanics duties may be adjusted to meet local conditions in agreement with the Local Union Business Manager
• Cleaning, repairing and routine maintenance of solar energy equipment
• Helper for service and maintenance Journeymen and Apprentices, as long as the Apprentices are fully employed

KNOWLEDGE AND SKILLS

Must possess required knowledge and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• HVAC tools, materials, and safe work practices.
• Types of air filters.

SKILLS

 Must possess required skills and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• Maintaining an established work schedule.
• Effectively using interpersonal and communications skills.
• Effectively using organizational and planning skills.
• Maintaining HVAC equipment.
• Maintaining confidentiality of work-related information and materials.
• Establishing and maintaining effective working relationships.
• Manage the budget within assigned department.

EDUCATION

Minimum G3 Gas fitter certification is required

Must be a member of UA787

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success