All jobs in Engineering

Responsible to perform PSAs (Potential Supplier Audits), responsible to close out PSA audit short falls.  Responsible to manage the APQP process to support program launches.  Responsible to develop and continually improve our Engineering Feasibility documents to include lessons learned by commodity/component.  Support supply crisis situations related to capacity and quality.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·       Ensure compliance with all legislative requirements in the facility’s geographic location and:

o   The Global Operating System Plays;

o   OHSAS 18001:2007 Health and Safety Management system standard;

o   ISO 14001:2004 Environmental Management System standard;

o   IATF/TS16949 Technical Specification Management and Linamar Quality Basics System standards.

·       Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.

·       Maintain balance between customer, employee, and financial satisfaction by maximizing facility/department Performance Indicators (Linamar Supplier Scorecard System).

·       Supply Management including APQP, Launch, PSA’s and crisis management.

·       Maintain effective communication with internal and external customers to ensure program requirements are met.

·       Interpret regulatory quality documents in order to apply them to manufacturing and quality systems.

·       Be actively involved in quality planning of the supply base (Control Plans, APQP, FMEA, PPAP, MSA).

·       Identify gauging methods required for the supplier to ensure quality requirements are met.

·       Participate & lead in APQP meetings.

·       Initiate and participate in 8D Problem solving meetings with suppliers.

·       Review accuracy of process documentation and update as required.

·       Supplier development activities (Prototype running, pre-production process analysis, run at rate on site, early containment evaluation, process production release).

·       Part Readiness follow up and support.

·       Safe launch assurance and/or red launch follow up and solution.

·       Follow up on lessons learned matrix and read across, ensure added to engineering feasibilities by commodity/component.

·       Willingness to travel as needed.

Credentials

·       A bachelor’s degree in engineering or related engineering discipline is required.

Desired Characteristics

·       Five to seven years of related experience.

·       Experience with risk analysis and problem failure modes and effects analysis (FMEA) for automotive products.

·       Experience in writing and executing engineering test protocols.  Write quality assurance reports that describe manufacturing problems, corrective actions taken, and preventative measures needed.  Proposals are usually written for non-technical audiences such as clients and management.

·       Ability to make presentations to senior management during annual meetings to provide an overview of areas such as product costing, maintenance and equipment failures which need to be considered when planning for the coming year.

·       Read operating and quality assurance reports to understand technical and operational information about facilities, processes, and equipment.

·       Experience in drawing interpretations and geometric dimensional tolerancing.  Knowledge and experience in gauging methods, calibration, and gauge R&R’s.  Ability to take precise measurements using specialized equipment and techniques.

·       Lead and co-ordinate project teams which include other engineers, technologists, clients, and contractors when designing, developing, and building products or facilities.

·       Proficient with MS Office and CAD applications. Familiar with material processes and IATF/TS16949 standards.  Experience with the use of statistical analysis software and computer-assisted design, manufacturing, and machining.

·       Attend formal professional development seminars and conferences as needed.  Conduct self-directed studies by reading journals and trade publications.  Must be aware of new technologies and advances in the engineering field.

What Linamar Has To Offer

·       Opportunities for career advancement.

·       Community based outreach supporting both local and global initiatives and charities.

·       Social committees and sports teams.

·       Discounts for local vendors and events, including auto supplier discounts.

We’re hiring a Mechanical Engineer to be part of a dynamic Maintenance Engineering team. We are particularly interested on a Mechanical Engineer that comes from the Mine Industry with experience on Fixed Plant equipment i.e. Crushers, Conveyors, Hoppers, Screens, Slurry Pumps, etc. If you are passionate about continuous improvement, root cause failure analysis, and one-time cost-effective repairs, this is the job for you!

This role gives you the opportunity to be at the forefront of our Extraction and Tailings operations, where you will have an immediate impact on the business. You will be directly interfacing with Operations and Maintenance teams to mitigate threats impacting reliability.

Minimum Qualifications

• Bachelor’s Degree in Mechanical Engineering discipline, or equivalent
• Professional Engineering designation or eligible for registration with APEGA
• Four years of field experience in an operating facility troubleshooting equipment problems and providing short and long term solutions to increase the reliability and availability of the equipment
• Experience in Root Cause Failure Analysis and Reliability metrics
• Experience with hydraulic systems is considered an asset
• Proficiency in Microsoft Office Suite programs
• Experience with SAP / S4 and Fieldglass is considered an asset
• Lean Six Sigma certification is considered an asset
• Client service oriented, ability to work both independently and collaboratively within a team as required, and Analytical and creative problem-solving skills
• Strong verbal and written communication and excellent organizational and time management skills

Responsibilities: 

• Serve as the primary contact between the Production Unit and the Rotating Engineering team, ensuring clear communication and coordination
• Participate in daily and weekly Production Unit meetings to support equipment availability and decision-making
• Provide updates and reports to stakeholders on the status of tasks, progress, and any potential concerns or deviations from the plan
• Issue scope of work and inspection recommendations for Outage and routine maintenance activities
• Issue reliability metrics reports for different equipment classes
• Monitor equipment health, troubleshoot performance and failures, and complete root cause analysis
• Complete equipment wear analysis
• Apply a continuous improvement mindset to increase equipment reliability and decrease operating cost

Location and other Key Details: 

• You will work out of a Syncrude Mildred Lake location in Fort McMurray
• Hours of work are a regular 40-hour work week, Monday to Friday
• Our engineering roles follow internal compensation guidelines and the pay band will generally be based years of experience and scope of work

04/10/2025

Address:

4100 Gordon Baker Road

Designs, builds, deploys, evaluates and maintains existing and future IT infrastructure. Ensures all IT systems function efficiently and seamlessly. Applies in-depth experience with components of on-premises and cloud infrastructure. Plans, acquires, and coordinates the installation of infrastructure devices across the enterprise while ensuring safe networks with disaster recovery options. Administers automated workflow tools, middleware application servers, and server visualization technologies. Acts as the primary technical liaison between Infrastructure and other IT teams, vendors and partners, as well as the business to design infrastructure solutions.

• Works to determine enterprise security controls and identify any threats to the infrastructure.
• Diagnoses complex network, storage and server issues and implements corrective solutions.
• Tracks vulnerabilities, applies remediations and patches to network and server assets.
• Conducts feasibility studies to determine the likelihood of proposed project's success in the current environment.
• Administers automated workflow tools, middleware application servers (e.g. Oracle Weblogic, IBM WebSphere), and server visualization technologies (e.g. VMware, Red Hat Virtualization, or Oracle VM) to maximise their efficiency.
• Provides proactive network/server monitoring to ensure optimum performance and acts on real-time alerts of critical issues.
• Performs hardware, software, and firmware upgrades - researches and recommends network upgrades.
• Manages and coordinates the release of changes into production applying standardized procedures and minimizing risk to existing services.
• Creates release plans, test and validation strategies, schedules and tracking tools to coordinate the contents of release packages for network and business applications.
• Evaluates effectiveness of current systems and supports in developing improvement strategies based on the findings.
• Focus is primarily on business/group within BMO; may have broader, enterprise-wide focus.

• Exercises judgment to identify, diagnose, and solve problems within given rules.
• Works independently on a range of complex tasks, which may include unique situations.
• Broader work or accountabilities may be assigned as needed.
• This role is a onsite role
• The role involves weekends and after hours work on a "as needed" basis.
• Must be able to lift up to 50 pounds.

Qualifications:

Foundational level of proficiency:

• Network routing, switching, and security.
• Configuration management.
• Systems administration.
• Scripting languages.
• IT infrastructure library.
• Root cause analysis.
• Troubleshooting.
• Cloud computing.
• Cybersecurity and privacy concepts, principles and solutions.
• It automation - DIGITAL FIRST.
• Building and managing relationships.
• Adaptability.
• Virtualization and virtual machines.
• Operating Systems and Platforms.
• Infrastructure as code (IaC).
• Quality assurance and control.
• Database administration.
• Containerization.
• Continuous improvement management.
• Communicating with impact.
• Customer Centricity.

Intermediate level of proficiency:

• Hardware Infrastructure.
• Version control.
• Verbal & written communication skills.
• Collaboration & team skills.
• Analytical and problem solving skills.
• Influence skills.
• Data driven decision making.
• Complex Problem Solving.
• Typically between 4 - 6 years of relevant experience and post-secondary degree in related field of study or an equivalent combination of education and experience.
• Technical proficiency gained through education and/or business experience.

$60,000.00 - $111,700.00

Salaried

The Engineer - Process position will be responsible for determining the operations for fabrication and assembly of products by reviewing parts drawings, specifications, and other engineering data. Primarily accountable for planning, scheduling, conducting, or coordinating phases of major engineering projects in addition to developing sequence of operations, estimate time requirements for each, and prepare operation sheets.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

• Work with production planning to set shop priorities and ensure all necessary tools and documentation needed in the plant are available.
• Attend Advance Quality Planning meetings to finalize design of required fixtures and tooling.
• Interface with suppliers of raw material and tools to establish engineering requirements for start of production.
• Investigate and find resolution of specific processing problems for assigned projects and parts.
• Prepare quotations for new jobs, including material and processing costs, tooling, gauges and capital investment costs if required.
• Participate in productivity improvement investigations.
• Conduct time studies.
• Maintain ongoing process control through quality troubleshooting and process improvement investigation.
• Regular review of all processes and operator instructions for assigned customers to ensure accuracy and conformance to actual procedures.
• Collect data and develop statistics to describe equipment and system functionality.
• Estimate durations of development, fabrication, construction and repair tasks.
• Define which materials and equipment to use for projects and select appropriate codes.
• Complete work order and change work order forms to notify key parties about projects.
• Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Credentials

• Post-Secondary education in Engineering or Equivalent.
• Minimum three years of related experience.
• Knowledge/work experience in machine processes, cutting tools, fixtures, CNC and Special purpose machines.
• Working knowledge of ISO-TS16949 and ISO 14001, and with mechanical blueprint interpretation including GD and T.
• Good computer skills, including Word, Excel and Outlook.
• Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining (i.e. AutoCAD, CAD/CAM and SolidWorks).

Desired Characteristics

• Able to interact with supervisors or managers and integrate work within teams of engineers and technicians to work on common projects.
• Attend formal professional development seminars and conferences as needed.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

Molson Coors Beverage Company is currently recruiting for the position of Shift Engineer (Relief) for our St. John's brewery. The ideal candidate for this position is a team player who possesses outstanding communications skills and has strong problem-solving abilities. The candidate, who will provide relief operation of our powerhouse operations, will be comfortable in a fast paced, multi-tasked, consumer packaged goods environment.

The Responsibilities:

The ideal candidate must possess the following:

• Work with a safety mindset and ensure brewery and Asset Care compliance with all relevant EH&S legislation and regulations
• Ability to work in a team environment
• Be self-motivated, hard-working and energetic
• Ability to troubleshoot problems quickly and to complete repairs effectively and efficiently

• Willingness to champion a culture of proactive and preventative maintenance with safety, quality, and reliability as key priorities
• Lead the team's pursuit of continuous improvement under the umbrella of World Class Supply Chain (WCSC)
• Always operate in alignment with Our Purpose, Ambition and Values

The Shift Engineer will:

• Provide relief coverage (vacation, sick, etc.) of brewery shift engineers
• Work a 12-hour shift rotation including weekends and stat holidays
• Have proven abilities for the safe and efficient operation of the plant pressure systems including boilers and related equipment, refrigeration, CO2 and compressed air systems.
• Troubleshoot problems quickly to complete repairs effectively and efficiently
• Be dependable, with the ability to work overtime, including weekends, when necessary
• Participate in maintaining spare parts to ensure we can support any potential equipment failures
• Respond to any equipment downtime issues in the brewery and warehouse(s)
• Support equipment capital improvement projects in the brewery
• Be willing to train and backfill in packaging operations should the need arise

The Other Qualifications:

• Possess a Red Seal 3rd Class Inter-Provincial stationary engineering designation and current registration within the province of NL
• 5+ years’ experience in a combined pressure plant containing an ammonia refrigeration system
• Ability to participate in a culture of continuous improvement with an EHS mindset
• Preference will be given to candidate with dual tickets
• Project Management experience is an advantage
• Experience in an Asset Care department is a plus
• Mechanical experience / hydraulic and pneumatic systems an asset
• Experience in CMMS (Computer Maintenance Management System) is also an asset

Weekly Hours: 40 

Term: 1 Temporary Full Time position available for approximately 18 months.

Additional Requirements:

• Successful candidates may be required to provide a satisfactory criminal record check per the City of Regina's Criminal Record Check Policy.
• Proof of education is required.
• Additional assessments may be conducted to evaluate competencies, skills, and knowledge.

Posting Period: 21-FEB-2025 to 14-MAR-2025
 

Toronto Water is the City of Toronto division responsible for all aspects of drinking water treatment and supply, wastewater collection and treatment, and stormwater management. The Division’s six business sections manage facilities and assets across the city, including treatment plants, pumping stations, water and sewer mains, laboratories, and yards.

Water Infrastructure Management (WIM) is responsible for the long-term management of Toronto's water, wastewater, and stormwater management assets to optimize infrastructure investment, level of service, and performance. WIM provides engineering analysis, asset management, infrastructure planning and policy development and coordination across Toronto Water to serve 3.6 million residents in Toronto and surrounding regions daily, manage over $83 billion in assets, and plan a 10-year capital budget of approximately $16.2 billion.

The successful candidate for this position will be a member of the Development & Growth Transformation Project Office (Project Office) in WIM. The Project Office leads, coordinates, monitors and tracks initiatives aimed at enhancing Toronto Water's involvement with development approvals. The Project Office focuses on improving pre-application touchpoints, site specific challenges, and coordination with water and sewer capital works projects.

MAJOR RESPONSIBILITIES:

Your primary responsibilities as an Engineer will vary, depending on assigned duties, but you will be expected to:

• Work with internal staff and consultants to complete studies, projects and programs related to water infrastructure management including sewer and water system design, development servicing, and business process improvements.
• Review and comment on engineering design reports and drawings, policies, guidelines, procedures, bylaws, and legislation.
• Provide technical review and advanced engineering input to other sections and divisions on matters related to water infrastructure and municipal engineering.Manage assigned projects, ensuring effective teamwork and communication, and high standards of work quality, ensuring projects are completed within established timeframes.
• Represent Toronto Water as a technical specialist at meetings with internal sections, City divisions, external agencies, the public and Councillor’s offices.
• Prepare technical reports, Committee and Community Council reports and content for public education/communication purposes, as required.
• Prepare capital business cases, project charters, bid documents (RFPs, RFQs, REOIs), terms of reference, and scope of work for consultant assignments, including selection and direction of consultants undertaking professional services for Toronto Water.
• Develop procedures, guidelines, technical standards, and policies related to managing water infrastructure including sewer and water system design, development servicing, and business process improvements.
• Assist the Manager in defining and allocating work and setting goals.
• Lead and provide input for working groups, training sessions, and presentations aimed at implementing continuous improvements related to development review processes and water infrastructure management.
• Perform other related duties, as assigned.

KEY QUALIFICATIONS

Your application for the role of Engineer must describe your qualifications as they relate to:

1. Registration as a Professional Engineer (P.Eng.) with Professional Engineers Ontario (PEO).
2. Completion of post-secondary degree or diploma in civil and/or municipal engineering; an equivalent combination of education and experience may be considered.
3. Experience as a Professional Engineer in an engineering role working with water, sewer and/or stormwater infrastructure including experience with scope, schedule, and cost management for design and construction projects.
4. Experience with capacity assessment, infrastructure servicing and funding, and the development approvals process.
5. Experience using software pertinent to the job function including Geographical Information Systems (GIS), hydraulic modelling, process flow mapping, and stakeholder survey software.
6. Experience contributing to or developing policies, standard operating procedures, design criteria, and guidelines.
7. Excellent communication and analytical skills to write technical reports, briefing notes, reports to Committee and Council, and responses to inquiries by external agencies and the public.
8. Knowledge of the Municipal Class Environmental Assessment (EA) process, especially related to municipal infrastructure planning, project management, and design.
9. Fundamental knowledge of federal, provincial and municipal regulations, policies and guidelines related to the job (e.g. Occupation Health & Safety Act) and applicable to water, wastewater, and stormwater systems.
10. Stakeholder management skills to plan, lead, manage and implement multidisciplinary projects of varied scope.
11. Competencies including interpersonal, conflict resolution, leadership and problem-solving skills, with the ability to interact effectively with all levels of the organization and to forge solid internal and external relationships.
12. Possession of, and ability to maintain, a valid Province of Ontario class "G" driver's licence and eligibility to qualify for a City driver's permit is an asset for this position.

A Qualified List of candidates will be established for the Engineer position in the Toronto Water Division and will be in effect for up to two years from the date the list is created. Qualified candidates on the list may be considered when filling future permanent and/or temporary vacancies in this position.

Notes:

• Applicants are required to demonstrate in their resume that their qualifications match those specified in the job posting.
• If selected for a temporary position, employee's placement is conditional on the approval of his/her executive director/general manager or designate
• Temporary and fixed-term part-time non-union employees will be reassigned to this position.

Conduct studies and develop and supervise programs to achieve the best use of equipment, human resources, technology, materials and procedures to enhance efficiency and productivity. Provide support in the design, fabrication, modification and evaluation of manufacturing operations such as machining, metal forming, welding/brazing, assembly and material handling. May develop sequence of operations, estimate time requirements for each, and prepare operation sheets.  Act as a resource to assist and troubleshoot manufacturing and quality issues. May assign work to drafters and technicians, technical writers, engineering technicians, and machine operators as required.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·        Ensure compliance with all legislative requirements in the facility’s geographic location and:

·        The Global Operating System Plays;

·        OHSAS 18001: Health and Safety management system standard;

·        ISO 14001: Environmental Management system standard;

·        TS 16949 Technical Specification Management and Linamar Quality Basics system standards.

Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.

Maintain balance between customer, employee and financial satisfaction by maximizing facility/department Performance Indicators to align to Linamar’s Stepping Stool of Success Strategy.

Support and maintain department lean initiatives as set out in LPS system requirements.

·        Maintain department 5S requirements.

Work with production planning to set shop priorities and ensure all required tools and documentation required in the plant for production run jobs are available.

Investigate and monitor new machinery and equipment and recommend or select efficient combinations.

Conduct time studies to optimize cycle counts of existing processes.

Assist in defining the plant lay-out and enhance ergonomic requirements by establishing programs and conducting studies. 

Planning and executing of projects related to new and pre-existing production lines, improvements, upgrades, layouts and new equipment related to machining or assembly.

Attend Advanced Product Quality Planning (APQP).

Recognize and resolve tooling related difficulties with existing and new projects while working with the manufacturing support staff.

Interface with suppliers of raw material and tools to establish engineering requirements for start of production.

Investigate and find resolution of specific processing problems for assigned projects/parts.

Conduct studies of the reliability and performance of plant facilities and production or administrative systems.

Develop and review all processes and operator instructions to ensure accuracy and conformance to actual procedures, revise as needed.

Participate in corrective action to meet ongoing cost, quality and delivery.

Lead development of process flows, process sheets, FMEA’s, and control plans.

Ensure the process is capable of producing parts to print specifications.

Recognize and resolve process related difficulties with current and future projects.

Participate in Customer Focus meetings.

Assist in the preparation of quotations

Assist in training shop floor personnel in machine set-up, equipment operation and best practices.

Adhere to TS16949 and applicable customer standards.

Credentials

·        A university degree or diploma in engineering or equivalent.

·        Licensing by a provincial or territorial association of Professional Engineers (P.Eng.) would be an asset.

Desired Characteristics

The ideal candidate will exhibit the following characteristics.

A minimum of five years of experience in a machining or manufacturing environment.

Knowledge/ work experience with machine processes, cutting tools, fixtures, CNC and special purpose equipment.

Ability to write comprehensive entries into technical log books which are then used as reference documents.

Discuss daily production with plant operators and maintenance staff.

Ability to evaluate the ability of current building systems to address increased demands from plant operations.

Experience with risk analysis and failure modes and effects analysis (FMEA).

Review scale drawings to ensure the proposed designs satisfy the clients' requirements and comply with manufacturing capabilities.

Ability to take precise measurements using specialized equipment and techniques.

Collect data and develop statistics to describe equipment and system functionality. Estimate durations of development, fabrication, construction and repair tasks.

Determine which materials and equipment to use for projects and decide the appropriate codes and standards to apply when completing these projects.

Contact suppliers to verify product availability, obtain equipment specifications and negotiate timely deliveries. Interact with others such as supervisors or managers for advice and direction, to discuss work and provide updates.

Coordinate and integrate work within teams of engineers and technicians to work on common projects. Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Interact with technicians or technologists for tasks such as creating scale drawings, preparing specifications, writing proposals and developing plant maintenance schedules.

Proficient with Microsoft Office and CAD applications. Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining i.e. Microsoft Office including Project, AutoCAD, SolidWorks).

What Linamar Has to Offer

·        Opportunities for career advancement.

·        Community based outreach supporting both local and global initiatives and charities.

·        Social committees and sports teams.

·        Discounts for local vendors and events, including auto supplier discounts.

The Streets Design GIS Technician performs the entry, update, and maintenance of GIS data as it relates to the City’s street infrastructure; this includes roads, sidewalks, bike lanes, pathways, seawalls, structures, etc. The GIS Technician interprets information captured on various paper as-built records and enter the data into the GIS using the Autodesk Topobase software. This position supports internal technical and operational staff.

This position requires GIS/CADD skills and a strong overall knowledge of GIS/CADD and municipal assets, in particular streets and sidewalks. Work is performed under supervision, with considerable independent judgment and action exercised in the technical aspects of the work.

This position reports directly to the Streets Design Asset Manager/Senior Engineer and works as part of a broader team of EIT’s, Civil Engineers, Planners, Project Managers, GIS Analysts and Engineering Assistants. Key contacts this position liaisons with are staff from other branches within Engineering Services, staff from Technology Services and GIS/CADD services, external utility companies, consultants, and contractors

Specific Duties & Responsibilities

• Gathers streets asset management data from a variety of sources and organizes the data to maximize the efficiency of entry into the City’s GIS system and MS Excel.
• Consults with appropriate subject matter experts to gain a full understanding of the data prior to entry into the system.
• Enters data in the City’s GIS system and MS Excel using appropriate procedures and adhering to business best practices as defined.
• Assists in managing, modifying and creating features in Topo-base (AutoCAD Map) and ArcGIS Pro
• Creates map layers and CADD resources in GIS applications
• Ensures work is carried out according to project schedules.
• Prepares and maintains detailed documentation as it relates to the GIS data entry process.
• Communicates with supervisor and senior leadership

Qualifications

Education and Experience:

• Completion of Grade 12, supplemented by completion of diploma in drafting, geographic information systems, computer based graphics or basic computer training, CAD and GIS courses at the vocational or technical school level and related work experience or an equivalent combination of training and experience.
• Sound work-related experience in working with GIS/CADD systems and related technology.

 Knowledge, Skills and Abilities:

• Knowledge of geographic principles related to roads, sidewalks, bike lanes, pathways, seawalls and structures.
• Proficient in the use of ArcGIS Pro (managing features and geodatabase) and experience in the use of AutoCAD.
• Ability to read and interpret engineering drawings
• Considerable knowledge of Geographical Information Systems (GIS) concepts in a municipal environment and of their interaction with CAD systems and business processes.
• Some knowledge of the operations, procedures and policies of various city departments.
• Exceptional organizational, time management, and self-starting skills.
• Ability to effectively collect, analyze and evaluate information required for GIS data entry.
• Ability to be able to interpret and follow policies and procedures related to GIS data entry.
• Ability to be able to work effectively and under pressure to meet project deadlines.
• Ability to work effectively with changing and competing priorities with frequent interruptions within a multiple task environment.
• Good verbal and written communication skills
• Good computer and data processing skills including applications such as Microsoft Outlook, Word and Excel. Ability to create spreadsheets.
• Detail oriented ability to perform thorough, complete, and accurate work.

Where operationally appropriate and subject to change, the City of Vancouver has a Flexible Work Program. This program allows staff to work remotely 1 – 4 days a week from locations that are a daily commutable distance from their work at a City worksite.  At this time this position is eligible to be part of the Flexible Work Program.

Business Unit/Department: Engineering Services (1300) 

Affiliation: CUPE 15 Non Pks 

Employment Type: Temporary Full Time 

Position Start Date: March, 2025 

Position End Date: June, 2025 

Salary Information: Pay Grade GR-021: $37.20 to $43.78 per hour

Application Close: February 23, 2025