All jobs in Maintenance & Repair

• All routine maintenance and inspection, regardless of the size of location of the mechanical equipment being inspected or maintained, where this work is done as a periodic routine service inspection maintenance procedure by the employer, limited to:
  • Filter Changing and the maintenance thereof.
  • All oil and greasing.
  • All belt adjusting or replacement.
  • Cleaning of cooling towers, coils, evaporator and condenser tubes and water treatment.
  • Delivery of parts and equipment.
  • General housekeeping.
  • Mechanics duties may be adjusted to meet local client requirements.
  • Cleaning, repairing and routine maintenance of solar energy equipment.
  • Helper for service and maintenance Journeymen and Apprentices.

• Must possess the required knowledge and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.
• HVAC tools, materials, and safe work practices.
• Types of air filters.
• Must possess required skills and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.
• Maintaining an established work schedule.
• Effectively using interpersonal and communication skills.
• Effectively using organizational and planning skills.
• Maintaining HVAC equipment.
• Maintaining confidentiality of work-related information and materials.
• Establishing and maintaining effective working relationships.
• Manage the budget within assigned department.

• Gas fitter certification is an asset.

The General Repair Technician II is a mid-entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility components (i.e. walls, floors, etc.). The Technician II is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility technical and non-technical component monitoring and inspection.
• Responds to routine service requests and performs preventative and corrective maintenance.
• Operates facility mechanical, electrical and other systems.
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.

Administration

• Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required.
• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required.
• Submits all expenditures on a timely basis.
• Other duties as assigned.

KNOWLEDGE & SKILLS

• High school diploma or equivalent.
• Minimum 3 years of facility operations and maintenance work experience.
• Knowledge of processes and practices relating to facility operations and maintenance.
• Ability to maintain, troubleshoot and repair non-technical facility components.
• Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair.
• Ability to research, learn, and gain greater proficiency in applying on-the-job—fire, life, and building codes and standards.
• Possesses a strong environment, health and safety mindset. Ability to perform work in a safe manner.
• Strong client-service orientation along with a high sense of urgency.
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification.
• Basic knowledge and understanding of Building Automation Systems (BAS).
• Ability to read understand and interpret technical drawings and information.
• Computer literacy.
• Demonstrated maintenance and repair skills.
• Must be able and willing to work shifts, be available for on-call/stand-by and emergency call outs as they arise.
• Must be willing to wear personal protective equipment.
• Must meet enhanced security clearance requirements.
• Valid drivers’ license.

Licenses and/or professional accreditation 

• Demonstrate an interest in obtaining a diploma or a certificate or be in the process of obtaining one.
• Meet the requirements for a higher security clearance.
• Any one of the following are considered an asset:
  • Building Operator Certification or equivalent through an accredited institution preferred
  • Building Systems Maintenance Certificate (SMC)
  • Systems Maintenance Administrator (SMA)
  • Systems Maintenance Technician (SMT)
  • Facilities Technician Certification
  • Working towards a trade license, an asset
  • Working towards Building Environment Systems (BES) Operation Class 1

The Building Maintenance Technician is a mid entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility components (i.e. walls, floors, etc.). The Technician II is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

Onsite parking is available

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility technical and non-technical component monitoring and inspection.
• Responds to routine service requests and performs preventative and corrective maintenance.
• Operates facility mechanical, electrical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.

Administration

• Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

KNOWLEDGE & SKILLS

• High school diploma or equivalent
• Minimum 3 years of facility operations and maintenance work experience
• Knowledge of processes and practices relating to facility operations and maintenance
• Ability to maintain, troubleshoot and repair non-technical facility components
• Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair
• Ability to research, learn, and gain greater proficiency in applying on-the-job—fire, life, and building codes and standards
• Possesses a strong environment, health and safety mindset. Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Basic knowledge and understanding of Building Automation Systems (BAS)
• Ability to read understand and interpret technical drawings and information
• Self-motivated
• Computer literacy
• Demonstrated maintenance and repair skills
• Must be able and willing to work shifts, be available for on-call/stand-by and emergency call outs as they arise
• Must be willing to wear personal protective equipment
• Must meet enhanced security clearance requirements
• Valid drivers’ license

Licenses and/or professional accreditation 

• Obtain a diploma or certificate within 2 years of employment
• Any one of the following are considered an asset:
  • Building Operator Certification or equivalent through an accredited institution preferred
  • Building Systems Maintenance Certificate (SMC)
  • Systems Maintenance Administrator (SMA)
  • Systems Maintenance Technician (SMT)
  • Facilities Technician Certification
  • Working towards a trade license, an asset
  • Working towards Building Environment Systems (BES) Operation Class 1

Responsibilities

• Perform service and preventive and corrective maintenance on all DC equipment following department procedures and trade best practices; working in a safe and effective manner and adhering to all safety policies

• Respond to all equipment breakdowns in a timely manner

• Maintain accurate repair parts and work records on computerized maintenance system (MAXIMO)

• Perform repairs with minimal supervision, taking responsibility and decision making to oversee that the job is complete within time demands

• Provide information on equipment and system problems to team lead or maintenance coordinator and provide updates as required, seeing job to completion within time requirements

• Provide accurate repair and troubleshooting information for all work in Maximo: time spent, parts used, failure comments, suggestions for corrective repairs or improvements, etc.

• Provide information on equipment and system problems

• Demonstrate flexibility when tasks are re-assigned or altered

• Follow maintenance quality and standard operating procedures as established

• Train and mentor apprentices in mechanical & job-specific skills

Qualifications

• Licensed Industrial Mechanic Millwright (Ontario Certificate of Qualification #433A)

• Ability to work at heights up to 100 feet

• Ability to stand for long periods with occasional laying, stooping and crouching plus frequent heavy lifting (up to 50 lb)

• Fabrication experience and ability to weld in all positions

• Demonstrated skills/experience with pneumatics

• Demonstrated machinery/repair/overhaul & troubleshooting skills with material handling equipment (e.g., conveyors, sorters, combiners, etc.)

• Demonstrated equipment troubleshooting skills

• Machine shop experience , rigging experience and 5S experience

Assets

• Certificate of Apprenticeship (Ontario or Canadian equivalent)

• Experience with towlines, automated conveyor systems (Intelligrated is an asset), automated storage and retrieval systems (ASRS, Eaton-Kenway or HK Systems are assets)

• Health & Safety experience (e.g., safety committee experience)

• Strong skills using MS Office (Excel, Word) or Autocad

• Ability to teach/mentor inexperienced trades or apprentices

• Maximo CMMS experience

Responsibilities

To achieve the Maintenance department and customer operations goals and ensure ongoing equipment (system) reliability through preventative maintenance, breakdown repairs, troubleshooting/analysis and equipment upgrades.

• Perform service and preventive and corrective maintenance on all DC equipment following department procedures and trade best practices, working in a safe and effective manner, and adhering to all safety policies.

• Respond to all equipment breakdowns in a timely manner.

• Maintain accurate repair parts and work records on computerized maintenance system (MAXIMO)

• Perform repairs with minimal supervision, taking responsibility and decision making to oversee that the job is complete within time demands.

• Provide information on equipment and system problems to maintenance supervisor and provide updates as required, seeing job to completion within time requirements.

• Provide accurate repair and troubleshooting information for all work in Maximo: time spent, parts used, failure comments, suggestions for corrective repairs or improvements, etc.

• Provide information on equipment and system problems.

• Demonstrate flexibility when tasks are re-assigned or altered.

• Follow maintenance quality and standard operating procedures as established.

• Train and mentor apprentices in mechanical & job-specific skills

• Other duties as assigned

• Shift:12-hour shift 7p-7a (Wed - Fri for 2 weeks and then Wed - Sat for the 3rd week)

Qualifications

• Licensed Industrial Mechanic Millwright (Ontario Certificate of Qualification #433A)

• Ability to work at heights up to 100 feet.

• Ability to stand for long periods with occasional laying, stooping, and crouching plus frequent heavy lifting (up to 50 lb)

• Fabrication experience and ability to weld in all positions.

• Demonstrated skills/experience with pneumatics, hydraulics.

• Demonstrated machinery/repair/overhaul & troubleshooting skills with material handling equipment (e.g., conveyors, sorters, AGVs, etc.)

• Demonstrated equipment troubleshooting skills.

• Machine shop experience, rigging experience and 5S experience.

Assets

• Certificate of Apprenticeship (Ontario or Canadian equivalent)

• Experience with automated conveyor systems, Beumer Sorter systems,   Tire Gantry,  and Rite Hite Dock door System

• Health & Safety experience (e.g., safety committee experience)

• Strong skills using MS Office (Excel, Word) or AutoCAD

• Ability to teach/mentor inexperienced trades or apprentices.

• Maximo CMMS experience

Overview

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Maintenance Supervisor position will be responsible for coordinating and supervising the activities of skilled and unskilled maintenance workers ensuring proper methods and procedures are followed to maintain, repair and service equipment, buildings and facilities in compliance with building codes and safety standards. Primarily accountable for maintaining production equipment in a manner that meets organization standards and ensure minimum equipment downtime. In addition, inspect projects to ensure conformity to specifications, direct safety inspections and preventative maintenance programs. This position is responsible for maintaining stock of inventory of materials, parts and specialized tools for the maintenance function.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Manage and direct the activities of employees and equipment in maintenance department in the absence of the maintenance manager.

· Effective employee relations including handling employee complaints, obtaining help and guidance for employee's with problems.

· Conducts monthly department meetings.

· Complete performance evaluations for all maintenance employees.

· Ensure appropriate parts and supplies are available.

· Maintain and direct all PM&PD activities.

· Maintain PMX software and all related documentation.

· Arrange for quotes from contractors in conjunction with maintenance buyer.

· Oversee, mentor and direct all staff.

· Department champion to ensure all contractors have appropriate documentation in order.

· Read completed inspection forms to ensure all maintenance, repair and inspection tasks have been adequately completed by workers.

· Study assembly drawings for equipment to determine what parts are required and how they go together.

· Establish work schedules and shift priorities and appointments to accommodate emergencies and cancellations.

· Develop and monitor detailed overhaul, repair and preventative maintenance schedules for shop tools, equipment and vehicles.

· Develop and monitor operating and project budgets.

· Assume a wide variety of roles to coordinate job tasks with those of junior workers, co-workers and subcontractors.

Credentials

· Completion of secondary school or equivalent general education.

· Journeyperson trade certification in a relevant trade considered an asset.

· MMP (Maintenance Management Professional) certification considered an asset.

· Minimum five years in a maintenance machining environment and two years as a supervisor or equivalent.

· Intermediate knowledge of all applicable Microsoft and other software applications.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

· Knowledge of fire alarm system:  Sprinkler, Ontario fire code.

·Automotive manufacturing experience required.

Desired Characteristics

· Ability to prioritize tasks to maintain efficiency.

· Ability to work independently to provide professional guidance and oversight.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

What Linergy has to Offer

Inclusive Culture: Join a team that celebrates diversity and encourages collaboration. Our inclusive culture ensures that every voice is heard and respected.

Social Committee: Be a part of our exciting social committee that organizes regular activities and celebrations. From team-building events to seasonal festivities, there's always something to look forward to.

Local Vendor and Supplier Discounts: Enjoy exclusive discounts from local vendors and suppliers. We believe in supporting our community and providing extra perks to our employees.

Competitive Compensation: We recognize the hard work and dedication of our team members. That's why we offer competitive compensation packages that reflect your skills and contributions.

Comprehensive Benefits: Your well-being is important to us. We offer a comprehensive benefits package that includes health insurance, retirement plans, and more.

Career Growth Opportunities: We are committed to the growth and development of our employees. We provide ongoing training and advancement opportunities to help you reach your full potential.

Positive Work Environment: We foster a positive and inclusive work environment where everyone is valued and respected. We believe in teamwork, collaboration, and celebrating our successes together.

Cutting-Edge Technology: Linamar is at the forefront of technological advancements in our industry. Join us and you will have the unique opportunity to master both time-tested machinery and the latest in state-of-the-art equipment through our comprehensive maintenance programs.

Overview

The Journeyperson Electrician holds a valid Certificate of Qualification issued by the province in which the work is performed and who has passed any examination which may be required. This role is responsible for operating facility systems; performing preventative and corrective maintenance, routine and on-demand services on facility mechanical and electrical equipment and systems for the assigned facility within the limits of company policy and trade certification. The Journeyperson Electrician is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

At this position level:

• Operates facility systems
• Performs preventative and corrective maintenance on facility mechanical and electrical equipment and systems
• Trade certification or license of the following - required:
  • Journeyman level Electrical license

KEY DUTIES & RESPONSIBILITIES

Subject to legislative licensing requirements and company policy:

• Performs work in accordance to established processes and practices
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection
• Performs regular facility, facility mechanical and electrical equipment and systems monitoring and inspection, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides recommendations for enhancement and repair.
• Monitors assigned facility by conducting facility walkthroughs, mechanical and electrical equipment and system monitoring and inspection
• Maintains, troubleshoots and repairs mechanical and electrical building systems and equipment within the limits of company policy and trade certification and oversees service providers.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on  facility mechanical and electrical equipment and systems  within the limits of company policy and trade certification
• Manages work order life cycle progressing the work form dispatched through to complete and records resolution data within service maintenance management database.  Ensures work completed meets quality, contract response and all other requirements
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required.
• Assists in the implementation of preventative maintenance (PM) program.  Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.
• Participates in facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required 
• Submits all expenditures on a timely basis  
• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.
• Other duties as assigned

Work Requirements

• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise.
• Must strictly adhere to Health and Safety policies and processes including wearing required Personal Protective Equipment (PPE)

KNOWLEDGE & SKILLS

• 3-5 years of facility operations and maintenance work experience
• High school diploma plus trades training and certification or licensing
• Advanced ability to adhere and to properly execute processes and practices relating to facility operations and maintenance
• Advanced ability to maintain and repair mechanical and electrical building systems and equipment within the limits of certifications and policies
• Advanced troubleshooting and resolution skills in order to determine and resolve building mechanical and electrical equipment and system issues
• Current knowledge of fire, life, safety and building codes and standards and ability to research and apply related codes and standards
• Possesses a strong environmental, health and safety mindset.  Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification

In addition:

• Must be capable of obtaining appropriate  security clearance where required
• Valid drivers’ license if required
• Demonstrates an interest in completing, working towards or completed one or more of the following - preferred:
  • Building Systems Maintenance Certificate (SMC) Systems Maintenance Administrator (SMA) Systems Maintenance Technician (SMT)

Licenses and/or Professional Accreditation Trade certification or license in one or more of the following - required:

•  Journeyman level Electrical license

 The Opportunity:

Our pork processing plant in Brandon is currently seeking an enthusiastic, motivated, and energetic individual to join the Maple Leaf family.  Are you motivated, ready to be challenged and are driven to succeed in an environment that rewards success?  Get a fresh start with Maple Leaf Foods.

Any MLF team member interested in being considered for this role are encouraged to apply online by **. Applications received beyond that date are not guaranteed consideration.

Snapshot of a Day-in-the-Life:

• Our pork processing plant in Brandon is currently seeking an enthusiastic, motivated, and energetic individual to join the Maple Leaf family.  Are you motivated, ready to be challenged and are driven to succeed in an environment that rewards success?  Get a fresh start with Maple Leaf Foods.

What You’ll Bring:

• Red Seal Industrial Mechanic (Millwright) Certificate is required
• Minimum two years of experience as a Millwright, preferable in a food production facility
• Basic computer skills
• Strong communication skills
• Ability to work well in a team environment
• Highly motivated – able to work well with minimal supervision

What We Offer at Maple Leaf Foods:

• Being part of a high-performance, people-focused company that has an inspiring and unique vision to become the most sustainable protein company on earth, and a deep commitment to sustainable protein across North America.
• An inclusive company culture and a work environment that keeps our people safe, rewards excellence, and empowers everyone to learn and contribute their best.
• Competitive Health and Wellness benefits that offer flexibility to meet your individual or family needs, including programs focused on improving mental health and wellbeing. These benefits start on your first day of employment.
• Defined Contribution Pension Plan with company matching that starts on your first day of employment.
• Learning and development opportunities, including workshops, ‘speaker series’ events, and resources that allow you to develop your skills and progress your career.
• Comprehensive tuition reimbursement program that supports continuous learning and development of our team members through investment in eligible degrees, diplomas, professional certification, or trades programs.
• Supporting our deep commitment to community impact, we offer up to two paid days annually to volunteer at a cause of your choice.