Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 2 to less than 3 years

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to make adjustments and minor repairs to heating, cooling, ventilation, plumbing, and electrical systems, contact tradespersons for major repairs, and perform minor repairs on appliances
• The candidates should be able to contact contractors for repairs and maintenance of the establishment, perform safety and security checks, and perform other routine maintenance jobs such as painting and drywall repair

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 3 to less than 5 years

Physical Requirements:

• The candidates should be able to work in noisy environments and be comfortable with dusty condition
• The candidates should be capable of handling heavy loads and prepared for physically demanding tasks
• The candidates should demonstrate attention to detail and be comfortable with bending, crouching, and kneeling
• The candidates should be able to stand for extended periods and work effectively under pressure

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to detect and troubleshoot irregularities and malfunctions, as well as repair or replace defective machinery parts
• The candidates should be able to fabricate parts required during overhaul, maintenance, or set-up, and perform routine maintenance work on machinery
• The candidates should be able to read and interpret blueprints, maps, drawings, and specifications, as well as operate machining tools to fabricate parts
• The candidates should be able to assemble machinery and equipment (prior to installation), install machinery and equipment, and operate hoisting and lifting equipment

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

By mail
10945 132 Street
Surrey, BC
V3T 3W8

In person
10945 132 Street
Surrey, BC
V3T 3W8
Between 10:00 a.m. and 04:00 a.m

The successful candidate will be responsible to ensure that all Food Safety, GMP, HACCP and other Quality Assurance Program requirements are consistently achieved with a sense of urgency at the facility.  In addition, the candidate is responsible for ensuring a safe, cost effective and service-oriented department, while providing Values-Based Leadership at the facility. 

Any MLF team member interested in being considered for this role are encouraged to apply online by December 11. Applications received beyond that date are not guaranteed consideration.

Snapshot of a Day-in-the-Life:

• Provide leadership and direction to Operators on the line with particular focus on blending, formulation, CCPs, and documentation.
• Provide guidance on product SOPs and steps in formulating product blends while maintaining traceability and proper documentation of lot codes and batches in SAP.
• Conduct CCP and/or Prerequisite Program training including verification of training effectiveness. This includes training related to implementation of new programs and corrective actions related to deviations.
• Immediately address deviations to FSQA procedures by coaching and re-training.
• Support the investigation of customer and consumer complaints including documentation of findings and drafting responses as appropriate.
• Write and revise FSQA SOPs including maintenance of the product SOPs, FSQA SOPs and electronic directories.
• Maintain and deliver GMP Training and CCP presentations as a member of the plant new hire orientation program.
• Conduct HACCP reassessment, monitoring, and verification to meet regulatory requirements including updates to forms, documents, and programs as required.
• As a member of the cross-functional team, investigate, document (In SAP Non-conformance system) and establish/implement appropriate corrective action to address deviations related to all programs with specific focus on foreign material and quality critical non-conformances.
• Maintain hold and release databases - internal and SAP. 
• In-depth analysis of CTQ (Critical to Quality) data as collected in SAP including tracking and trending for interpretation and development of actions to address deviations.
• Support all aspects of audit preparation and execution including documentation, preparation, program review, on-site inspection, training and other duties as required.
• Collect samples and conduct raw material sensory assessment and communicate results to Operations.
• Perform other SAP functions as required such as hold/release program, inspection lot oversight, usage decisions, etc.
• Provide support to hourly Production Operators in delivery of FSQA procedures.
• Participate in Period review, Town Hall meetings, other communication sessions.
• Assist CFIA inspectors with CVS tasks or other support as requested.
• Participate in Six Sigma projects.
• Perform other duties as assigned.

What You’ll Bring:

• Bachelor of Science or College Diploma in Food Safety/Science program or equivalent experience.
• 1-3 years previous experience in a technical food manufacturing role is preferred.
• Strong understanding of Pre-requisite Programs, HACCP, CCP’s and GMPs related to the food industry.
• Intermediate to exceptional MS Office skills.
• Strong interpersonal skills.
• Strong oral and written communication skills.
• Excellent organization and planning skills.
• High attention to detail.
• The ability to work cooperatively in a team environment.
• Ability to work with a variety of people and to be assertive as required.
• Ability to work effectively under minimal supervision.
• Strong time management skills with an ability to work in an environment with shifting priorities.
• Willingness to learn and teach others, be self-directed and motivated.
• Work as part of a functional team and be an exceptional fit with our Maple Leaf Leadership Values.

What We Offer at Maple Leaf Foods:

• Being part of a high-performance, people-focused company that has an inspiring and unique vision to become the most sustainable protein company on earth, and a deep commitment to sustainable protein across North America.
• An inclusive company culture and a work environment that keeps our people safe, rewards excellence, and empowers everyone to learn and contribute their best.
• Competitive Health and Wellness benefits that offer flexibility to meet your individual or family needs, including programs focused on improving mental health and wellbeing. These benefits start on your first day of employment.
• Defined Contribution Pension Plan with company matching that starts on your first day of employment.
• Learning and development opportunities, including workshops, ‘speaker series’ events, and resources that allow you to develop your skills and progress your career.
• Comprehensive tuition reimbursement program that supports continuous learning and development of our team members through investment in eligible degrees, diplomas, professional certification, or trades programs.
• Supporting our deep commitment to community impact, we offer up to two paid days annually to volunteer at a cause of your choice.

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 2 to less than 3 years 

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to interpret welding process specifications and operate manual or semi-automatic, fully automated welding equipment
• The candidates should be able to read and interpret welding blueprints, drawings specifications, manuals, and processes, as well as examine welds to ensure they meet standards and/or specifications
• The candidates should be able to operate manual or semi-automatic flame-cutting equipment, operate brakes, shears, and other metal shaping, straightening, and bending machines, and fit, braze, and torch-straighten metal
• The candidates should be able to determine the weldability of materials and operate hoisting and lifting equipment
• The candidates should be able to operate previously set-up welding machines to fabricate or repair metal parts and products, operate previously set-up brazing or soldering machines to bond metal, and start up, shut down, adjust, and monitor robotic welding production lines
• The candidates should be able to maintain and perform minor repairs on welding, brazing, and soldering equipment

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Other trades certificate or diploma or equivalent experience
Experience: Candidates need experience of 2 years to less than 3 years
Certificates, licences, memberships, and courses: Candidates must have Electrician Trade Certification

Shifts: Day and Morning
Work setting: Construction, service, repair, various locations, maintenance, commercial, residential, installation and troubleshooting/diagnostic

Physical Requirements:

• The candidate should be able to work in fast-paced environment, maintain tight deadlines and also pay attention to detail
• The candidate should be physically strong

Other Requirements:

• The candidate should be able to work in an organized way
• The candidate should be someone who can judge and also have excellent written communication
• The candidate should have experience of equipment and machinery like conventional electrical devices, electronic devices, high voltage and energized equipment and also instrumentation
• The candidate should have specialization on lighting system

Responsibilities:

• The candidate should be able to have professionalism in customer service
• The candidate should be able to install, replace and repair electrical controls and panel boxes and also install surface mount and/or overhead cables
• The candidate should be able to keep maintenance reports and documentation, splice, join and connect wires, renovate electrical systems in residential and commercial structures and also read and interpret blueprints, maps, drawings and specifications
• The candidate should be able to test and measure voltage, loads, ground faults integrity of circuits, troubleshoot and isolate faults and also conduct preventive maintenance programs

Benefits:

• The employees get health care plan

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

The Maintenance Repairperson is the intermediary between facilities and their maintenance requirements. In this fast paced environment, you will be working on multiple requests and ensuring the requests are completed in a timely fashion. This role is also responsible for maintaining the lifecycle of all tools assigned to their facilities in accordance with all internal policies and procedures. This includes the purchase, delivery, inventory and any preventative maintenance requirements. Other additional tasks will include assisting with snow removal, assisting with trench cleaning, conducting safety inspections, ensuring preventative maintenance plans are being followed and rotating through a 24/7 on-call schedule for minor Fuel Maintenance at the city’s Fuel Sites.

Your success will be measured by your ability to achieve results in a respectful, inclusive and service-minded way.

With a focus on the City of Edmonton’s Cultural Commitments to Safe, Helpful, Accountable, Integrated and Excellent, you will:

• Liaising between the facility and the Facility Maintenance Service group to ensure work orders are submitted, processed and closed in a timely fashion
• Ensure that any and all preventative and planned maintenance is conducted in a timely fashion in accordance to the City’s policy
• Perform semi-skilled manual labour activities in Infrastructure Maintenance which may include but are not limited to: safety inspections and repairs, rehabilitation of assets, winter snow removal
• Perform rough carpentry work in the repair, maintenance and alteration of buildings
• Inspects cranes and other major assets on an ongoing schedule, reporting and following up with deficiencies
• Removal of furniture and fixtures when necessary
• Work closely with on-site facility Forperson/Supervisor and perform related work as required
• Ability to operate a variety of hand tools, power tools, shop tools, as well as the frequent operation of motor vehicles and other equipment
• Use equipment and tools that may include but are not limited to: trucks, skid steers, trailers, blowers, chainsaws, snow blowers, tampers, tapers, tractors, shovels, rakes, axes, power saws and other power/hand tools
• Regularly performs inspections on equipment to ensure equipment is functioning properly and has no irregularities; performs minor maintenance on equipment
• Performs work in a safe and efficient manner following policies and regulations; participates in safety talks, writes up simple reports (inspection reports, accident reports, inventories etc.) etc.
• Perform other related duties as required

Qualifications

• Completion of the tenth school grade; experience or training in building and mechanical maintenance and repair work; or an equivalent combination of training and experience
• Valid Alberta Class 5 driver's licence (or provincial equivalent). Obtaining and maintaining a City Driver's permit is a requirement of this position
• 3 years progressively responsible experience in buildings, maintenance and operations is considered an asset
• Knowledge of the occupational dangers and safety precautions of the trades involved
• Knowledge of the standard methods, materials, tools and equipment used in one or more of the building or mechanical trades applicable to work assignments
• Knowledge of departmental and civic policies, regulations and operations affecting the work assigned
• Ability to understand and carry out oral and written instructions
• Skill in the use and care of the tools required to perform the work assignments
• Ability to establish and maintain effective relationships as necessitated by work assignments
• Ability to perform outside tasks in all weather conditions
• Basic proficiency in Google Applications and operating tablets, smartphones and laptops
• Compliance with the City of Edmonton's safety standards for Personal Protective Equipment (PPE), such as wearing steel toed boots, is a requirement for this position
• Environmental conditions may include: heat, cold, wet, dust, noise 
• Demonstrate service excellence, embracing diversity and promoting inclusiveness
• Demonstrate alignment with the Cultural Commitments of Safe, Helpful, Accountable, Integrated and Excellent, fostering an environment for others to do the same. For more information on the City’s Cultural Commitments, please visit edmonton.ca/our-culture
• Demonstrate the foundational competencies, key behaviours and attributes of the City’s six leadership competencies: Courage, Inclusivity, Values-Based Influencer, Collaborative Networker, Systems Thinker and Creative Innovator.  For more information on the City’s leadership competencies, please visit edmonton.ca/our-culture
• Applicants may be tested

We are currently seeking skilled Welder Fabricator in the Vancouver, BC area to join our team. 

BASIC PURPOSE

• To ensure all assigned mechanical related tasks are completed in a timely and cost-effective manner with a high level of quality, using safe work practices acceptable to the customers’ satisfaction.

WAGE RANGE

Competitive wages will be based on qualifications, experience, and position.

KEY ACCOUNTABILITIES/RESPONSIBILITIES/COMPETENCIES

• Utilizes safe work practices and promote safety policies to others. Must maintain a clean and safe work area.
• Proficient in standards, codes, best practices, safe work policies and practices.
• Responsible for safe and conscientious use of equipment including forklift, skidsteer loader, scissor lifts, power tools along with proficiency in safe methods of hoisting and rigging at all times.
• Assist with mechanical equipment inspections, troubleshooting, repairing and preventative maintenance along with installations, dismantling, assembling as per manufacturer specifications and recommended standards.  Perform welding duties as required, fabrication and field fit/repairs of equipment.
• Proficient in material take offs, interpreting equipment and fabrication drawings, including providing accurate layout of the work and building to drawings and specifications. In addition, O+M Manuals to ensure correct maintenance and service has been provided.
• Accurately and effectively uses various types of welding and cutting equipment.
• Ability to complete required daily paperwork with legible penmanship and to KPIC standard.
• Responsible for all company tools ensuring they are accounted for at the end of each day. Maintaining a clean tool trailer each and every day.  

QUALIFICATIONS

• Demonstrates honesty and integrity in all business interactions and strives to meet customer needs in a creative and safe manner.
• Highly motivated, positive attitude, pleasant demeanor with an ability to handle multiple time-sensitive tasks while working within a team environment and cross-functional departments as well as independently.
• Have valid CWB certification, experience with GMAW/MIG).
• Mechanical ability and knowledge such as troubleshooting skills, ability to assemble and commission mechanical systems in addition to understanding of multi hp industrial drives, shafts, bearings, and lubrication considered an asset.
• Ability to install, examine, diagnose, and adjust various types of industrial and mechanical equipment is an asset
• Appropriate level of experience in industrial maintenance/service environment.  Agricultural Industry experience considered an asset.
• Enrolled in Apprenticeship program.  Journeyman status is an asset.
• Ability to work in cold & hot weather/environments and green/brown fields sites subject to grain dust.
• Required Safety tickets/training, minimally including a current First Aid Certificate, fall arrest, confined space, WHIMIS, CSTS will be considered an asset and preference will be shown towards candidate holding valid & current training.  Proof of training maybe requested.
• Holds no previous safety violation within the FWS Group of Companies.
• Perform other tasks as assigned 

OTHER INFORMATION

• Valid class 5 driver’s license required with driver’s abstract.
• Candidate must be open and flexible to change, work during scheduled shutdowns, shift and, when necessary, overtime hours to accommodate scheduled maintenance of equipment. 
• Position will involve occasional overnight trips and travel.

GREAT BENEFITS

KPIC is a proud member of the FWS Group of Companies and one of Canada’s Best Managed Companies for 9 consecutive years.

• Ride Sharing to Site
• Apprenticeship programs upon hire
• Competitive Wages
• Excellent Benefits Package, including Group Retirement Program with Employer match Contributions along with Life Insurance, Extended Health Care, Vision Care, Dental and more..
• Health and Wellness Program
• Prescription Safety Eyewear Reimbursement 
• Vacation starting at 3 weeks
• Profit Sharing/Bonus Plan
• Employee Share Ownership Plan (ESOP)
• Apprenticeship and Education Funding Programs
• Onboarding Gear Bag equipped with standard PPE and KPIC branded clothing
• Employee Recognition, Scholarship and Volunteerism Awards for employee’s children
• Annual Protective Clothing Reimbursement & Corporate Clothing Credit
• Employee and Family Assistance Program
• Onboarding & Referral Incentives

Apply Now!

Requirements:

Languages: Candidates must have knowledge of the French Language
Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates should have experience of 1 to less than 2 years
Equipment and machinery experience: Small engine equipment, weed trimmer/edger, and lawn mowers

Location: Saint-Hubert, QC
Work setting: Work in employer’s/client’s home, landscape maintenance, and private residence

Physical Requirements:

• The candidates should be comfortable working outdoors and able to work in noisy environments
• The candidates should be able to work in hot conditions
• The candidates should be capable of handling physically demanding tasks and demonstrate attention to detail
• The candidates should be comfortable with walking as part of their duties

Other Requirements:

• The candidates should exhibit reliability and demonstrate punctuality
• The candidates should be hardworking individuals

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to weed, prune, and trim trees and plants, cut grass, and rake and collect refuse
• The candidates should be able to cart and spread topsoil and other materials

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

At Corteva Agriscience, you will help us grow what’s next. No matter your role, you will be part of a team that is building the future of agriculture – leading breakthroughs in the innovation and application of science and technology that will better the lives of people all over the world and fuel the progress of humankind.

What You’ll Do:

• Support plant operations
• Deliver maintenance support for capital projects
• Maintain condition of production equipment, shop equipment and tools
• Support process safety management and location safety efforts
• Conduct seasonal prep work including preventative maintenance and equipment reliability tasks
• Ensure proper set-up, calibration, operation and preventative maintenance of equipment, machines and facilities
• Utilization of predictive maintenance tools and techniques to detect and remedy machine failures
• Create, continually update, adhere to and train preventative maintenance plans for process equipment
• Maintain detailed equipment records and prints
• Participate in root cause analysis of equipment failures
• Participate in pre-and post-mortems for annual production processes
• Provide experience on failure and repair techniques during root cause analysis
• Ensure repair techniques, repair procedures and equipment specific training are documented and made available
• Assist in creation of work instructions for maintenance related tasks
• Other duties as assigned by the supervisor

Qualifications

Education:

• You have your High School Diploma/GED

What Skills You Need:

• Willing and able to work overtime, weekends and holidays when necessary
• Willing and able to work shift work
• Willing and able to lift up to 50lbs. with or without reasonable accommodation
• Proficiency in Microsoft Office programs
• Journeyman industrial mechanic experience

What Makes You Stand Out:

• Knowledge of production agriculture and associated machinery, grain handling and cleaning equipment
• Dust collection systems knowledge
• Chemical pump systems knowledge
• Basic level of building systems knowledge
• Able to adjust quickly to changing conditions and multiple priorities
• Detail oriented
• Post-Secondary technical diploma / degree
• Millwright skills
• Welding skills
• Forklift operation
• Aerial work platform operation
• Working from heights
• Confined space work
• Pneumatics and hydraulics, install, testing, maintenance, repair
• Robotic packaging
• Process controls systems knowledge (PLC)
• Experience with electronic maintenance management systems (SAP)
• Ability to learn new skills and systems quickly

Relocation assistance not offered for this position.
VISA Sponsorship is (not) available for this position.

This positions is required to work in office 5 days a week.

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates should have experience of 1 to less than 7 months
Own tools/equipment: Steel-toed safety boots
Security and safety: Airport security clearance

Physical Requirements:

• The candidates should be able to thrive in a fast-paced environment, work effectively under pressure, and meet tight deadlines while demonstrating attention to detail

Other Requirements:

• The candidates should demonstrate client focus and exhibit dependability
• The candidates should possess excellent oral communication skills, be organized, and demonstrate reliability
• The candidates should be a team player and accurate in their work
• The candidates should have excellent written communication skills

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to clean, polish, and wax furniture

Location: Enfield, NS

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]