All jobs within 50 km around Ancaster

Under direct supervision, assist in establishing and implementing organizational policies and procedures related to local, provincial, and federal health and safety regulations. Ensure compliance through regular audits of laboratories and facilities, and provide training on emergency response, hazardous material handling, and industrial hygiene. Oversee the collection, storage, transportation, and shipping of hazardous waste.

Performance Expectations

• Conduct health and safety audits; both compliance and program based. 
• Prepare comprehensive written reports with clear findings and recommendations.
• Monitor, measure, and report on environmental health and safety performance.
• Act as an environmental health and safety resource to the Human Resources Manager.
• Review current policies and procedures to ensure compliance with the Occupational Health and Safety Act/Regulations and other relevant workplace legislation.
• Carry out health and safety objectives and programs within the facility.
• Develop, implement and monitor health and safety policies and procedures of the facility. 
• Serve as a resource and provide guidance and assistance to the Joint Health and Safety Committee at the facility.
• Provide safety training to all managers/supervisors, employees, and Joint Health and Safety Committee, regarding their duties and responsibilities, health safety and the law, incident investigations, hazard identification, workplace inspection and promotion of safety awareness.
• Ensure health and safety orientation/job-specific training for all new employees, transferred employees and/or promoted employees are conducted. 
• Review the Workplace Hazardous Materials Information System and update and implement procedures and practices, and ensure training is conducted promptly.
• Review safety statistics, conduct trend analysis and make recommendations for continual improvements. 
• Review illnesses and injuries both occupational and non-occupational with the health nurse and the company physician to ensure lost time is minimized.
• Review the Workplace Safety Insurance Board (WSIB) claims to make recommendations to minimize the time of work and maximize the safe return to work program. No direct involvement
• Conduct required workplace inspections, and facility audits and provide a corrective/prevention action plan complete with responsibilities and timelines.
• Perform other duties/projects as assigned. 

Credentials

• A minimum of 5-7 years of related experience.
• Typically requires a bachelor’s degree in an appropriate scientific or engineering field or equivalent.
• Completion of Canadian Registered Safety Professional (C.R.S.P.) designation or actively working towards the designation.

Desired Characteristics.

• Ability to communicate with external and internal stakeholders. For example, communicate with members of the medical community to gain insight into evolving ways to modify work environments to meet the needs of disabled employees. Use this information to analyze programs in effect in the workplace and provide input to policy development regarding the accommodation of disabled employees' needs.
• Extensive knowledge and application of environmental health and safety legislation and industry standards. Ability to review a variety of sources such as legislation on health and safety standards to become informed of the scope of employee relations cases. 
• Develop cost-benefit analyses for a wide range of programs, such as health and safety training programs, to present the company with significant input to long-range human resource planning.
• Ability to work independently to conduct research and develop policy papers and reports. Work as a team member in both internal and external working groups. Work with industry-wide professional organizations, boards and colleagues both inside and outside of their organization.
• Experience with ISO 14001 and ISO 45001 is an asset. 
• Undertake continuous learning through courses, such as community college and university courses, through on-the-job initiatives and highly developed networking and professional liaison. Attend conferences and seminars and read professional journals to learn about best practices and emerging trends in health and safety as needed.

What Linamar Has to Offer

• Competitive Compensation
• Employee Benefits package includes but not limited to, Drug, Dental & Vision etc. 
• Opportunities for career advancement.
• Sustainability Counsel 
• Community based outreach supporting both local and global initiatives and charities. 
• Discounts for local vendors and events, including auto supplier discounts.

The Materials Coordinator position, under general supervision, responsible for establishing the quantity and order date for materials needed to meet the master production schedule. In addition, initiate purchase or production requisitions as appropriate.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Coordination and release of vendor materials to meet daily production schedules.

· Directly influence weekly and long term production requirements for all lines, through the daily analysis of customer releases.

· Manage inventory stock levels by applying advanced inventory control techniques; monitoring and update minimum and maximum stock levels.

· Inventory management; maintain target inventory level for raw and finished good products, cycle counting and physical inventory.

· Develop and maintain weekly and daily shipping schedules for all customers and vendors.

· Utilize customer software systems to communicate their daily standards.

· Dispute any infractions to our Customer rating when applicable.

· Maintain close support with all Subcontracting suppliers to ensure all schedules are being met.

· Expediting of all customer and vendor requirements when necessary.

· Coordination of transportation and vendor releases to assure the timely delivery of materials and to minimize freight costs.

· Generation of Customer and Vendor Delivery performance metrics.

· Perform monthly Physical inventory, when necessary by Materials Manager.

· Maintaining computerized inventory control system in conjunction with manual systems.

· Provide information to customs department for clearing incoming/outbound shipments, i.e. purchased items, raw material, machines, etc.

· Receive assignments from supervisors at beginning of each shift and plan how best to sequence tasks to meet deadlines.

· Complete forms, such as weekly inventory sheets.

· Communicate with suppliers to confirm details, such as purchase order numbers.

· Calculate invoices and accept cash, cheque or credit card payments from customers.

Credentials

· Post-Secondary education in Materials Management or related experience.

· Minimum two years production planning experience in a manufacturing environment.

· MRP and Web-based Customer System (Ford DDL, GM SupplyPower, DCX S.M.A.R.T.) considered an asset.

· Knowledge of QS9000, TS16949 and ISO14001.

· Ability to read forms, such as invoices, parts order forms, packing slips and bills of lading.

· Use computer-operated machinery such as print delivery slips using computerized printers.

Desired Characteristics

· Ability to work with a partner and independently as needed.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

Our company was built on the dream of a pioneering entrepreneur, and that spirit continues to empower our work with businesses across Canada today. The Rogers Business team helps organizations of all sizes adapt, scale, and win with network services and other innovative technology solutions that are reliable, secure, and scalable. These solutions are built to allow businesses to operate more efficiently, reduce costs and improve productivity and collaboration. We are looking for team members who have a passion for delivering industry-leading value to customers and businesses in the communities where we live and work, so come build a rewarding career at Rogers and be a driving force behind our success story!

Account Manager – SWO Enterprise  

This position is responsible for retaining and growing Roger’s revenue within an assigned Enterprise Strategic Account territory.  By effectively partnering with clients, Account Manager will provide effective business solutions to customers through innovative and strategic planning, superior customer service, executive engagement, and prospecting.

What you will be doing:

• Responsible for the new business development with professional “Hunter” mindset within an assigned base of prospects, low share, & incumbent accounts and/or territories/industries within the Rogers For Business Strategic team.

• Primary client relationship manager; marshals Rogers resources across sales efforts.

• Capable of having business development conversations about client needs; leverages specialists for more complex sales opportunities.

• Selling & servicing an integrated suite of Rogers For Business solutions (Wireless, Network Access, Managed Services, Data Centre , Cloud, Disaster Recovery solutions, Voice Collaboration & Hosted PBX Business Productivity solutions, and Managed Services).

• Use innovative selling techniques and product knowledge, to grow business primarily within existing base of accounts using the full suite of Rogers products and services.

• Analyse and pursue opportunities for prospecting additional business within assigned construction and mixed vertical territory.

• Represent the company with a positive attitude and strong work ethic that will maintain a maximum retention rate and manage growth.

• Develop account and relationship management strategies, to gain insider status and to protect the account from any competitive activity.

• Act as the single point of contact for accounts on the full suite of products and services provided by Rogers Communications Inc.

• Share your ideas by actively participating at regular sales meetings and fulfil required administrative duties to support your role.

• Own and troubleshoot customer problems and provide solutions by working with key internal contacts to maintain integrity of business.

• Responsible for pro-actively maintaining a high level of Sales hygiene, forecasting, and account planning.

• Actively participate in regular sales meetings and fulfil administrative duties as required.

What you will bring:

• University degree or equivalent expertise.

• 5 to 10 years sales experience in Enterprise/Strategic sales (companies with 1500+ Employees).

• Experience working in complex sales environment selling to CIO, IT leaders with appreciation for long sales cycles & need to manage multiple customer stakeholders.

• Must be trustworthy, have Strong Business Acumen, likeable & customer focused on help customers solve problems & achieving their desired goals & outcomes.

• Ability to work in a “virtual” team environment with ability to work cross functionally with key internal stakeholders & executives.

• Must be proficient in selling telecom services (wireless, IOT, wireline, Data Centre + Cloud, Managed & Professional Services, Cloud based Phone systems).

• Experience in Office 365, Teams, PowerPoint, Excel, Word & Salesforce CRM.

• Seasoned Communicator both verbally & written.

• Technology Driven (understand market trends).

• Proven interpersonal skills.

• Proven aptitude for implementing sales strategies.

• Be self-motivated, results orientated & accountable for the development of new business.

• Positive Team Member and Contributor.

• Proven funnel management experience.

• Experienced presenting to Executives (Internal/External).

• Experience in data solutions selling and strategy.

What’s in it for you?

We believe in investing in our people and helping them reach their potential as valuable members of our team. As part of our team, you’ll have access to a wide range of incredible resources, growth opportunities, discounts, and perks, including:

• Competitive salary & annual bonus

• Competitive & flexible health and dental benefits, pension plan, RRSP, TFSA, and Stock matching programs.

• Discounts: Enjoy up to 50% off Rogers Services and Blue Jays Tickets, 25% off TSC items, and a 20% discount on all wireless accessories sold in Rogers stores.

• Paid time off for volunteering

• Company matching contributions to charities you support

• Growth & Development Opportunities:

o Self-driven career development programs (E.g. MyPath program)

o Rogers First: priority in applying to internal roles of interest

• Wellness Programs:

o Homewood employee & family assistance program

o Cognitive Behavioural Therapy (CBT) & Virtual therapy sessions

o Low or no-cost fitness membership with access to virtual classes

• Our commitment to the environment and diversity:

o Work for an organization committed to environmental protection

o Strong commitment to diversity and inclusion with employee resource groups supporting equity-deserving groups including groups representing People of Colour, 2SLGBTQIA+, Indigenous Peoples, Persons with Disabilities and Women. We all bring something different, and we know what makes us different makes us great.

This is a hybrid work position and will require you to be in office three days per week. 

If you are selected to move forward in the recruitment process, here is what you can expect:

• 15-minute phone screen with your recruiter, 1-hour virtual interview with Hiring Manager, 30-minute final round virtual interview with Director of the team. Best of luck!

As part of the recruitment process, the selected candidate will be required to complete a background check which includes credit and criminal checks.

To protect our people, brand and assets, a pre-employment background check will be conducted. As part of our selection process, all candidates must clear a criminal background check. Additionally, a credit check and drivers abstract may be required depending on the role.

Schedule: Full time
Shift: Day
Length of Contract: Not Applicable (Regular Position)
Work Location: 85 Grand Crest Place (031), Kitchener, ON
Travel Requirements: Up to 50%
Posting Category/Function: Sales & Account Management
Requisition ID: 318511

The Reliability Technician will be responsible for maintaining and servicing equipment used in the facility for daily production. They will ensure safe plant operations and a safe working environment for all employees.

The Reliability Technician will be responsible for effective troubleshooting, repair, installation, and preventative maintenance of facility electrical distribution systems and equipment in an industrial setting. They will ensure safe plant operations and a safe working environment for all employees.

Snapshot of a Day-in-the-Life:

• Read and interpret drawings, blueprints, schematics, and code specifications to determine lay-out of industrial equipment and installations
• Conduct planned preventive & predictive maintenance and keep maintenance records
• Actively participate in preventive maintenance program on building equipment processing equipment daily
• Efficient production equipment set up, inspection and shutdown of all related equipment when required, including process changeovers
• Assist in planning, organizing of work activities (drawing interpretation, parts preparation)
• Program, troubleshoot, maintain and repair industrial equipment and automation including PLCs, HMI, frequency drives, temperature control and other related devices

What You’ll Bring:

• Certified Journeyman Electrician with 5+ years’ experience. Preference to those with proof of completing the Industrial Apprenticeship Program
• Knowledge of conveyors, high speed slicers, pumps / compressor, electrical / electronic controls and high speed packaging equipment
• Strong working knowledge of HMI's, electric motor controls, programmable logic controllers, basic wiring circuits and skills necessary to safely test common electrical systems and make minor repairs where permitted
• 442A licensing an asset vs. 309A

What We Offer at Maple Leaf Foods:

• • Be part of a company with an inspiring and unique vision, with a deep commitment to sustainability and expanding its leadership in sustainable protein across North America
  • Competitive Health and Wellness benefits 
  • Defined Contribution Pension Plan
  • Employee Assistance Program

Conduct studies and develop and supervise programs to achieve the best use of equipment, human resources, technology, materials and procedures to enhance efficiency and productivity. Provide support in the design, fabrication, modification and evaluation of manufacturing operations such as machining, metal forming, welding/brazing, assembly and material handling. May develop sequence of operations, estimate time requirements for each, and prepare operation sheets.  Act as a resource to assist and troubleshoot manufacturing and quality issues. May assign work to drafters and technicians, technical writers, engineering technicians, and machine operators as required.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·        Ensure compliance with all legislative requirements in the facility’s geographic location and:

·        The Global Operating System Plays;

·        OHSAS 18001: Health and Safety management system standard;

·        ISO 14001: Environmental Management system standard;

·        TS 16949 Technical Specification Management and Linamar Quality Basics system standards.

Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.

Maintain balance between customer, employee and financial satisfaction by maximizing facility/department Performance Indicators to align to Linamar’s Stepping Stool of Success Strategy.

Support and maintain department lean initiatives as set out in LPS system requirements.

·        Maintain department 5S requirements.

Work with production planning to set shop priorities and ensure all required tools and documentation required in the plant for production run jobs are available.

Investigate and monitor new machinery and equipment and recommend or select efficient combinations.

Conduct time studies to optimize cycle counts of existing processes.

Assist in defining the plant lay-out and enhance ergonomic requirements by establishing programs and conducting studies. 

Planning and executing of projects related to new and pre-existing production lines, improvements, upgrades, layouts and new equipment related to machining or assembly.

Attend Advanced Product Quality Planning (APQP).

Recognize and resolve tooling related difficulties with existing and new projects while working with the manufacturing support staff.

Interface with suppliers of raw material and tools to establish engineering requirements for start of production.

Investigate and find resolution of specific processing problems for assigned projects/parts.

Conduct studies of the reliability and performance of plant facilities and production or administrative systems.

Develop and review all processes and operator instructions to ensure accuracy and conformance to actual procedures, revise as needed.

Participate in corrective action to meet ongoing cost, quality and delivery.

Lead development of process flows, process sheets, FMEA’s, and control plans.

Ensure the process is capable of producing parts to print specifications.

Recognize and resolve process related difficulties with current and future projects.

Participate in Customer Focus meetings.

Assist in the preparation of quotations

Assist in training shop floor personnel in machine set-up, equipment operation and best practices.

Adhere to TS16949 and applicable customer standards.

Credentials

·        A university degree or diploma in engineering or equivalent.

·        Licensing by a provincial or territorial association of Professional Engineers (P.Eng.) would be an asset.

Desired Characteristics

The ideal candidate will exhibit the following characteristics.

A minimum of five years of experience in a machining or manufacturing environment.

Knowledge/ work experience with machine processes, cutting tools, fixtures, CNC and special purpose equipment.

Ability to write comprehensive entries into technical log books which are then used as reference documents.

Discuss daily production with plant operators and maintenance staff.

Ability to evaluate the ability of current building systems to address increased demands from plant operations.

Experience with risk analysis and failure modes and effects analysis (FMEA).

Review scale drawings to ensure the proposed designs satisfy the clients' requirements and comply with manufacturing capabilities.

Ability to take precise measurements using specialized equipment and techniques.

Collect data and develop statistics to describe equipment and system functionality. Estimate durations of development, fabrication, construction and repair tasks.

Determine which materials and equipment to use for projects and decide the appropriate codes and standards to apply when completing these projects.

Contact suppliers to verify product availability, obtain equipment specifications and negotiate timely deliveries. Interact with others such as supervisors or managers for advice and direction, to discuss work and provide updates.

Coordinate and integrate work within teams of engineers and technicians to work on common projects. Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Interact with technicians or technologists for tasks such as creating scale drawings, preparing specifications, writing proposals and developing plant maintenance schedules.

Proficient with Microsoft Office and CAD applications. Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining i.e. Microsoft Office including Project, AutoCAD, SolidWorks).

What Linamar Has to Offer

·        Opportunities for career advancement.

·        Community based outreach supporting both local and global initiatives and charities.

·        Social committees and sports teams.

·        Discounts for local vendors and events, including auto supplier discounts.

Working on the line you will machine parts and perform quality checks in a timely manner. These positions require shift work and the ability to work overtime.

This position is for night-shift only.
 
Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

Requirements
 

• Previous Manufacturing experience is an asset
• Ability to work all rotating shifts
• Ability to work overtime as required
• Must be willing to learn
• Work independently and as part of a team
• Must be 16 years of age to work on the shop floor

Why Linamar

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

POSITION SUMMARY:

• Assist with the development and continual updating of company policies and interpretation, including employee handbook, supervisors manual, etc.
• Maintains interaction and communication with government bodies, other organizations, etc.
• Acts as a resource/consultant to supervisors/managers with regard to policies, legislation, Employee’s Charter, etc. In conjunction with Manager, assists in the planning of key programs and activities (e.g. staffing, layoffs, etc.).
• Prepares and provides quarterly absenteeism report to supervisors.
• Acts as Department Supervisor in His/Her absence.
• Assists in the preparation of the yearly departmental budget.
• Responsible for the delivery of Human Resources activities in their assigned areas of responsibility, including the following:
  • Recruitment and hiring
  • Immigration of offshore workers
  • Orientation and Training
  • Monitoring of job posting policy
  • Monitoring of performance appraisal procedures
  • Monitoring of progressive discipline
  • Terminations, layoffs and exit interviews
  • Maintaining and administering pay equity structure
  • Maintaining employee personnel files
  • Dealing with employee concerns with respect to job security, fair treatment, safe and healthful workplace, competitive wages and benefits, equity participation and communication and information
  • Assisting supervisors/managers with the fair and reasonable implementation of company policies/procedures

MINIMUM JOB REQUIREMENTS:

• Community college diploma/certificate in Human Resources.
• 2-3 years directly related professional work experience.

SKILLS AND COMPETENCIES:

• Good organizational, leadership, interpersonal and problem-solving skills.
• Excellent verbal and written communication skills.
• Mathematical/Analytical and proven problem-solving skills
• CHRP designation or in process preferrable.

COMPENSATION PACKAGE AND PERQUISITES:

• Salary band of $81,931.20- $91,228.80  
• 2 Weeks Vacation after 6 months of employment, 4 Personal Paid Holidays and 2 Floater Days
• Ability to lieu 40 hours of overtime for an additional paid week off
• Comprehensive Health Benefits – Including health, dental, vision, and disability coverage to keep you feeling your best
• Company-matched retirement savings plans (RRSP)
• On-site subsidized cafeteria that is open for all three shifts

Awareness, Unity, Empowerment:

Regular / Permanent

Cosma International

In the role of Retail Territory Sales Representative working in the Branford Territory you will be part of the Ontario Commercial team. This position reports to the District Sales Manager, and is responsible for achieving volume and distribution targets for our continued success in the region.

This role provides hands-on training, company vehicle, cell phone, tablet, and the opportunity to learn and grow with one of Canada's oldest brewing companies.

The Responsibilities:

• Through a First Choice lens, build and support relationships with key customers, business partners, industry associations, government and suppliers
• Negotiate annual agreements for on-premise customers to ensure profitability and success when assisting in the implementation of their strategic initiatives
• Achieve and exceed targeted sales plans on a daily, weekly, monthly and annual basis
• Ensure brilliant execution by building rapport and supporting product standards
• Plan and administer budgets, develop business case proposals and execution
• Participate in daily sales meetings with your team
• Analyze valuable data by tracking volume, distribution performance and the competitive landscape to develop strategies that will help us meet any challenge

The Other Qualifications

• You thrive on challenge. You act with appropriate urgency to various market events and trends that require a quick turnaround in plans and strategy
• You are confident, diplomatic, professional and exercise great judgment in developing and maintaining excellent business relationships
• You are deadly serious about execution and take pride in a proven track record in delivering results
• You are a strong team player that can inspire others; you respect your commitments, hold yourself and others around you accountable
• You are a skilled negotiator focused on the customer; your constant curiosity fosters your innovative style and you can equally execute ideas given to you

• You exhibit the Molson Coors “Our Brew” values and demonstrate this daily in your actions and attitude
• You have a Bachelor’s degree in Business Administration, Marketing or other relevant field
• You have 1 - 5 years' progressive experience in sales and key accounts management in the consumer or direct store delivery industries;
• You must have and maintain a provincial valid driver’s license in good standing with no limitations/restrictions.
• As part of the recruitment process, the candidates will be required to provide consent to complete a criminal background check and provide a driver’s abstract

Work Perks that You Need to Know About: 

• We care about our People and Planetand have challenged ourselves with stretch goals aroundourkey priorities 

• Wecare about our communities, andplay our part to make a difference – from charitable donations to hitting the streets together to build parks,giving back to the community is part of our culture and who we are 

• Engagement with a variety of Business Resource Groups, which can provide volunteer opportunities, leadership experience, and networking through the organization 

• Ability to grow and develop your career centered around our First Choice Learning opportunities 

• Participation in our Total Rewards program with a competitive base salary, incentive plans, parental leave, health, dental, vision, retirement program with incredible employer match, generous paid time off plans,an engaging Wellness Program,andan Employee Assistance Program (EAP) with amazingresources 

• On site Pub,access to cool brand clothing and swag, top eventsand, of course...free beer and beverages! 

• Work within a fast paced and innovative company, meeting passionate colleagues and partners with diverse backgrounds and experiences 

POSITION SUMMARY:

The Mechanical Millwright is primarily responsible to service, maintain and test production equipment.  This position will support production by trouble shooting problems, making repairs and system improvements (optimization).

• Assembles and installs new equipment and machines and is able to make modifications to existing equipment as requested.
• Carries out preventative maintenance procedures on mechanical equipment as laid out by the manufacturer’s specifications.
• Coordinate activities of co-op students, apprentices, helpers and assigned contractors.
• Assists in developing and/or updating Preventive Maintenance procedures.
• Perform all duties in an environmentally responsible manner in accordance with the Karmax Environmental Policy Statement—3 P’s. Prevent Pollution, Preserve Natural Resources & Protect our Environment

MINIMUM JOB REQUIREMENTS:

• Grade 12 Education or GED
• Certificate of Qualification Industrial Mechanic (Millwright) 433

SKILLS AND COMPETENCIES:

• Excellent written and verbal communication skills.
• Excellent mathematical, analytical and organizational skills
• Able to perform various computer functions (Microsoft Office, Production Software)
• Able to safely operate all Material Handling Equipment (Forklift, crane, buggy) in assigned area of responsibility
• Experience in hydraulics and pneumatics
• Able to operate a variety of machine tools, i.e. tig/mig/arc welders, lathes, milling machines, hand tools, etc.

COMPENSATION PACKAGE AND PERQUISITES:

• Hourly wage of $46.61/hr
• Shift Premiums $1.00/hr extra for afternoon shift and $1.25/hr extra for night shift
• 2 Weeks Vacation after 6 months of employment, 4 Personal Paid Holidays and 2 Floater Days
• Ability to lieu 40 hours of overtime for an additional paid week off
• Comprehensive Health Benefits – Including health, dental, vision, and disability coverage to keep you feeling your best
• Company-matched retirement savings plans (RRSP)
• On-site subsidized cafeteria that is open for all three shifts

The Accounting Associate position is responsible for planning, organizing, and administrating specialized accounting activities associated with maintaining ledger accounts and for developing financial statements and reports. This position is suitable for a recent graduate from an accounting program who is ready to start the CPA program.

The successful candidate will spend 3 years gaining experience by rotating through various Linamar operations in Guelph, ON. You will have exposure to areas such as Consolidations, Global Finance, Group Office and Operations Accounting. Employees who have previously completed this program are successfully working in all areas of Accounting and Finance within Linamar both locally and internationally.

 Responsibility

• Prepare all month end reconciliations journal entries with complete back up in a timely and accurate manner.
• Prepare and support the financial statements, reconciliations and reports in a timely manner.
• Complete product line income statements and variance analysis with explanations for all significant items.
• Prepare, evaluate, and assist with accurate processing of monthly accounts payable and accounts receivable aging.
• Process the entry of accounts payable on a weekly basis, with three-way matching to purchase orders and packing slips.
• Prepare the bi-weekly payment processing for all corporate payables.
• Process all corporate manual expense reports.
• Review and track all corporate credit statements with approval and receipts.
• Assist with preparation of annual budget, five-year business plan, and a twelve-month rolling forecast as needed.

Academic/Educational Requirements

• Post-Secondary Education in Accounting, Business or related discipline,
• Candidate should be prepared to enroll in the CPA program.
• Candidate must have the requisite educational requirements to enroll in the CPA program.

Required Skills/ Experience

• Recent graduate with prior co-op experience.
• Ability to evaluate the accuracy of financial data.
• Ability to prepare financial summaries such as balance sheets and income statements.
• Ability to work in a fully computerized environment including advanced Excel skills.

What Linamar Has to Offer

• Competitive Compensation
• Employee Benefits package includes but not limited to, Drug, Dental & Vision etc. 
• Opportunities for career advancement.
• Sustainability Counsel 
• Community based outreach supporting both local and global initiatives and charities. 
• Discounts for local vendors and events, including auto supplier discounts.

287 Speedvale Avenue West, Guelph, Ontario, N1H 1C5, CA