All jobs within 50 km around Cochrane

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates need experience of 2 years to less than 3 years

Location: Barrhead, AB

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 2 years to less than 3 years
Credentials: Auto Body Repairer Trade Certification

Physical Requirements:

• The candidates should have a strong attention to detail
• The candidates should be comfortable with tasks involving bending, crouching, and kneeling

Other Requirements:

• The candidates should be accurate and dependability

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• • The candidates should be able to review damage reports and estimates of repair cost and plan work to be performed
  • The candidates should be able to replace front end components, body components, doors, and frame and underbody components
  • The candidates should be able to file, grind, and sand body surfaces to be repaired, mask and tape auto body surfaces in preparation for painting
  • The candidates should be able to hammer out dents, buckles, and defects using blocks and hammers, remove damaged fenders, panels, and grills and bolt or weld replacement parts into place, and apply primers and repaint surfaces

• The candidates should be able to repair or replace interior components
• The candidates should be able to inspect repaired vehicles and test drive vehicles for proper handling.
• The candidates should be able to mix paint, blend, and match colors
• The candidates should be able to operate soldering equipment or use plastic filler to fill holes, dents, and seams
• The candidates should be able to straighten bent frames using frame and underbody pulling and anchoring equipment

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume) through the below-mentioned details

By email
[email protected]

By mail
#11 – 700 33 St NE
Calgary, AB
T2A 5N9

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates don’t need experience although having experience is an asset

Physical Requirements:

• The candidates should be willing to work outdoors, at heights, underground, and in confined spaces as required by the job, and work effectively in noisy and dusty environments
• The candidates should be capable of handling physically demanding tasks, including lifting objects weighing up to 23 kg (50 lbs), and performing repetitive tasks with precision and efficiency
• The candidates should be able to work under pressure, maintaining focus and productivity in challenging situations

Other Requirements:

• The candidates should demonstrate flexibility, adapting to changing circumstances and tasks as needed, and exhibit reliability, consistently meeting commitments and completing tasks on time
• The candidates should be team players, collaborating effectively with colleagues to achieve common goals and objectives

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to load, unload, and transport construction materials, erect and dismantle concrete forms, scaffolding, ramps, catwalks, shoring, and barricades, and mix, pour, and spread materials
• The candidates should be able to assist in framing houses, erecting walls, and building roofs, level earth to fine-grade specifications, and assist in demolishing buildings
• The candidates should be able to perform routine maintenance work and remove rubble and other debris at construction sites

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language.
Education: Candidates need standard educational qualifications such as secondary (high) school graduation certificate
Experience: Candidates need an experience of 1-2 years
Supervision: 5-10 people, 11-15 people, Cook (general), Food service counter attendants and food preparers, Kitchen and food service helpers and Staff in various areas of responsibility
Security and Safety: Criminal record check

Physical Requirements:

• The candidate should be able to work in a fast-paced environment and work under pressure
• The candidate should be able to work with tight deadlines
• The candidate should be physically demanding and be a combination of standing for extended periods and walking

Other Requirements:

• The candidate should have an efficient interpersonal skills and be a team player

Responsibilities:

• The candidate should be able to establish methods to meet work schedules also supervise and coordinate activities of staff who prepare and portion food
• The candidate should be able to train staff in job duties, sanitation and safety procedures also estimate and order ingredients and supplies
• The candidate should be able to hire food service staff also ensure food service and quality control
• The candidate should be able to prepare budget and cost estimates also address customers’ complaints or concerns
• The candidate should be able to maintain records of stock, repairs, sales and wastage also prepare and submit reports
• The candidate should be able to prepare food order summaries for chef also must have knowledge of the establishment’s culinary genres
• The candidate should be able to supervise and check assembly of trays, supervise and check delivery of food trolleys also establish work schedules

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates don’t need experience, training will be provided

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• • The candidates should be able to load, unload, and transport construction materials, clean and lubricate cranes, and perform routine maintenance work

• The candidates should be able to erect and dismantle concrete forms, scaffolding, ramps, catwalks, shoring, and barricades, mix, pour, and spread materials, and assist in framing houses, erecting walls, and building roofs
• The candidates should be able to clean and pile salvaged materials, remove rubble and other debris at construction sites, and tend or feed machines or equipment used in construction
• The candidates should be able to direct traffic at or near construction sites and read and interpret blueprints

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

By mail
105-65 Belvedere PT Se
CALGARY, AB
T2A 7Y9

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates don’t need experience although having experience is an asset.

Other Requirements:

• The candidate should be able to work with being focused on the client and also in an organized way
• The candidate should be a team player

Responsibilities:

• The candidate should be able to present bills to customers and accept payment in cash, credit or debit cards, travellers cheques or room billings, describe menu items including daily specials for customers, advise on menu selections and also take orders and relay to kitchen and bar staff
• The candidate should be able to prepare and serve specialty food at customers’ tables and also greet patrons, present menus, make recommendations and answer questions regarding food and beverages

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a College/CEGEP
Experience: Candidates don’t need experience although having experience is an asset
Certificates, licences, memberships, and courses: Candidates must have Air Brake (Z) Endorsement and Driver’s License (Class 1 or A)

Work setting: Various locations
Security and safety: Driving record should checked (abstract)

Other Requirements:

• The candidate should have documentative knowledge of driver logbook

Responsibilities:

• The candidate should be able to obtain special permits and other documents required to transport cargo on international routes, oversee condition of vehicle and inspect tires, lights, brakes, cold storage and other equipment, record cargo information, hours of service, distance travelled and fuel consumption and also tarping and ensuring safety and security of cargo
• The candidate should be able to perform emergency roadside repairs and also perform pre-trip, en route and post-trip inspection and oversee all aspects of vehicle

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language.
Education: Candidates don’t need standard educational qualification such as high school, bachelor’s degree, a certificate or a diploma
Experience: Candidates need an experience of 7 months to 1 year
Computer and Technology Knowledge: Multi-line switchboard, Word processing software, Central reservation system (CRS), Spreadsheet, Internet

Location: Oyen, AB and Kindersley, SK
Shifts: To be determined
Work Setting: Hotel, motel, resort, Rural area

Physical Requirements:

• The candidate should be able to pay attention to detail and work in a fast-paced environment
• The candidate should be able to stand for extended periods and work under pressure

Other Requirements:

• • The candidate should be able to work with being focused on the client and be someone who can be dependent on

• The candidate should be able to work in a flexible environment and have judgment skills
• The candidate should be able to work in an organized way and be someone who can be relied on
• The candidate should be a team player

Responsibilities:

• The candidate should be able to register arriving guests and assign rooms also take, cancel and change room reservations
• The candidate should be able to provide information on hotel facilities and services also provide general information about points of interest in the area
• The candidate should be able to investigate and resolve complaints and claims also process guests’ departures, calculate charges and receive payments
• The candidate should be able to balance cash and complete balance sheets, cash reports and related forms also follow emergency and safety procedures
• The candidate should be able to answer telephone and relay telephone calls and messages also assist clients/guests with special needs
• The candidate should be able to handle wake-up calls also provide customer service

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

As our Mechanical Engineer, you are responsible for the developing mechanical system and component designs for a variety of processing facilities which meet client requirement while also supporting the project team and coordinating design groups.

Position Overview:

• Participates in the conceptual proposal and execution phases of the projects, working with the Business Development team, Project Planners, Front-end Design team, and Project Managers to provide design concepts and layouts as well as equipment sizing. May interact directly with the client or the client’s representative, to clarify and satisfy unique or complex requirements. 
• Stays current with applicable technologies, standards, products, and regulations. Specifically requires direct knowledge of CSA, ASME, and other relevant design codes related to piping, boilers and pressure vessel, and process design.  
• Works with the design team to prepare system and component designs which considers site conditions, process requirements, costs, and regulatory requirements.  Evaluates and incorporates subcontractor/supplier information and requirements where necessary. 
• Works collaboratively with Project Management team and other members of the Engineering and Design team to prepare detailed design drawings and reports to meet the client’s requirements. 
• Works with the team to develop drawings and to promote a high-quality high value product.   
• Responsible to seal drawings that have been prepared under their direction as required in jurisdiction where professional designation is recognized.  Provide required information to assist Engineers in other jurisdictions to seal drawings. 
• Visits worksite to inspect work, commission equipment, process controls, and train operator to ensure project is proceeding according to the approved design. 
• Makes ongoing design changes as required throughout the project. 

Qualifications Needed:

• B.Sc. or M.Sc. in Mechanical or Process Engineering with a P.Eng. designation in multiple provinces and/or states. 
• At least five years design engineering experience in the industry is preferred. 
• At least five year’s experience in the design-build industry is preferred. 
• Computer skills that includeproficiency with Word and Excel. 
• A practical yet creative approach to problem solving.  Open-minded with a willingness to consider new ideas. 
• Good interpersonal and communication skills.  Able to work as part of a team.  Must not be overly sensitive to challenges or criticism. 
• High degree of accuracy and able to manage multiple details under tight deadlines and pressure. 
• Travel required which includes some extended stays

Our team is responsible for all software engineering activities to ensure that business objectives are met. This includes the creation, development, design, and improvement of products, software, applications, and services. These roles are responsible for the development of computer programming systems and applications including the design, coding, testing and deployment of products and solutions to meet business obligations.

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates don’t need experience, training will be provided

Physical Requirements:

• The candidates should be comfortable working in a fast-paced environment and be able to stand for extended periods
• The candidates should be capable of handling weights up to 13.5 kg (30 lbs)

Other Requirements:

• The candidates should demonstrate client focus and possess efficient interpersonal skills.
• The candidates should be team players

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to bring clean dishes, flatware, and other items to serving areas and set tables, as well as carry and replace linen
• The candidates should be able to clear and clean tables, trays, and chairs, load buspans and trays, and replenish condiments and other supplies at tables and serving areas
• The candidates should be able to package take-out food, portion and wrap foods, serve customers at counters or buffet tables, and take customers’ orders

Benefits:

• The candidates will get dental plan, health care plan, vision care benefits, and free parking available

Location: Fairview, AB

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

By mail
11014 100 ave
Fairview, AB
T0H 1L0