All jobs within 400 km around Victoria

Job Summary: As a member of the BGIS SCS Team, you will be generally responsible for cleaning in a designated zone with an emphasis on quality control, health and safety & striving to exceed client expectations. 

Key Responsibilities: Functioning as a core member of the operational team and reporting to the Manager/ Supervisor as a Cleaner you may be required to perform some of the following tasks as required by the Manager/Supervisor and needs of the client:

• Clean floors by sweeping, scrubbing, or vacuuming
• Dry/wet mop (wash/scrub) and polish hard surface floors. (The washing/scrubbing of floors is done with handheld or auto scrubbers. In large open applications, automatic equipment may be used to perform these functions) 
• Strip and finish hard surface floors manually or with power equipment when required 
• Dry/wet mop (wash/scrub) and polish hard surface floors including washroom floors. (The washing/scrubbing of floors is done with handheld or walk behind buffing machines. In large open applications, automatic equipment may be used to perform these functions) 
• Transport garbage from drop points to garbage bins or compactor 
• Transport maintenance machinery, where necessary, between floors and job sites 
• Cleans and stores equipment and machinery used
• Cleans glass areas requiring ladders, scaffolding or other extension equipment to reach. 
• Cleans washroom floors including stripping and finishing 
• Cleans stairwells and elevator cabs where ladders are required 
• Loads and unloads supplies and replenishes cleaning solutions
• Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures
• Other duties that management may assign 
• Strip, seal, finish, and polish floors
• Strip and finish hard surface floors manually or with power equipment when required 
• Steam clean or shampoo carpets 
• Notify managers concerning the need for major repairs or additions to building operating systems
• Mix water and detergents in containers to prepare cleaning solutions, according to specifications
• Strip, seal, finish, and polish floors
• Steam clean or shampoo carpets
• Remove snow and debris from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow melting chemicals.

Job Requirements:

• Experience in performing various cleaning, housekeeping and maintenance activities in an institutionalized environment.
• Experience in using floor maintenance machines, cleaning equipment, materials and solutions.
•  Knowledge of the Occupational Health and Safety Act and the provisions that apply to this work including WHMIS.
• Ability to lift, push and pull heavy items as well as climb ladders.
• Excellent interpersonal skills with the ability to maintain cooperative working relationships with staff, clients and the general public.
• Ability and willingness to work weekends, holidays and shifts as assigned as well as work in multiple locations.
• Ability to follow verbal and written instructions, prepare and maintain manual and electronic records.

Licenses and/or Professional Accreditation

• Must meet security clearance requirements, where applicable
• Must have a valid Class G license (may be required)

Physical demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The employee must occasionally lift and/or move up to 25 pounds. 

Job Summary: As a member of the BGIS SCS Team, you will be generally responsible for cleaning in a designated zone with an emphasis on quality control, health and safety & striving to exceed client expectations. 

Key Responsibilities: Functioning as a core member of the operational team and reporting to the Manager/ Supervisor as a Cleaner you may be required to perform some of the following tasks as required by the Manager/Supervisor and needs of the client:

• Clean floors by sweeping, scrubbing, or vacuuming
• Dry/wet mop (wash/scrub) and polish hard surface floors. (The washing/scrubbing of floors is done with handheld or auto scrubbers. In large open applications, automatic equipment may be used to perform these functions) 
• Strip and finish hard surface floors manually or with power equipment when required 
• Dry/wet mop (wash/scrub) and polish hard surface floors including washroom floors. (The washing/scrubbing of floors is done with handheld or walk behind buffing machines. In large open applications, automatic equipment may be used to perform these functions) 
• Transport garbage from drop points to garbage bins or compactor 
• Transport maintenance machinery, where necessary, between floors and job sites 
• Cleans and stores equipment and machinery used
• Cleans glass areas requiring ladders, scaffolding or other extension equipment to reach. 
• Cleans washroom floors including stripping and finishing 
• Cleans stairwells and elevator cabs where ladders are required 
• Loads and unloads supplies and replenishes cleaning solutions
• Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures
• Other duties that management may assign 
• Strip, seal, finish, and polish floors
• Strip and finish hard surface floors manually or with power equipment when required 
• Steam clean or shampoo carpets 
• Notify managers concerning the need for major repairs or additions to building operating systems
• Mix water and detergents in containers to prepare cleaning solutions, according to specifications
• Strip, seal, finish, and polish floors
• Steam clean or shampoo carpets
• Remove snow and debris from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow melting chemicals.

Job Requirements:

• Experience in performing various cleaning, housekeeping and maintenance activities in an institutionalized environment.
• Experience in using floor maintenance machines, cleaning equipment, materials and solutions.
•  Knowledge of the Occupational Health and Safety Act and the provisions that apply to this work including WHMIS.
• Ability to lift, push and pull heavy items as well as climb ladders.
• Excellent interpersonal skills with the ability to maintain cooperative working relationships with staff, clients and the general public.
• Ability and willingness to work weekends, holidays and shifts as assigned as well as work in multiple locations.
• Ability to follow verbal and written instructions, prepare and maintain manual and electronic records.

Licenses and/or Professional Accreditation

• Must meet security clearance requirements, where applicable
• Must have a valid Class G license (may be required)

Physical demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The employee must occasionally lift and/or move up to 25 pounds. 

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

This is a regular, part-time position with a wage range of $16.75 - $18.00 per hour. The starting salary will be based on the successful candidate's competencies, including but not limited to experience, education and performance related to this role.

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates should have completed college/CEGEP or possess equivalent experience
Experience: Candidates don’t need experience although having experience is an asset

Physical Requirements:

• The candidates should possess a strong attention to detail to ensure accuracy in a fast-paced environment and be capable of meeting tight deadlines and working efficiently under pressure
• The candidates should be prepared to handle repetitive tasks as part of their responsibilities

Other Requirements:

• The candidates should demonstrate punctuality in their work attendance and exhibit a strong focus on client needs and satisfaction
• The candidates should possess efficient interpersonal skills for effective communication with clients and colleagues and demonstrate excellent oral communication abilities
• The candidates should also display excellent written communication skills and be flexible in adapting to changing situations and requirements
• The candidates should maintain an organized approach to their work and be reliable in fulfilling their duties and commitments
• The candidates should be team players, capable of collaborating effectively with colleagues

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to access and process information and address customers’ complaints or concerns
• The candidates should be able to answer inquiries and provide information to customers, as well as explain the type and cost of services offered
• The candidates should be able to issue receipts and other forms and perform general office duties
• The candidates should be able to sell merchandise

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates don’t need experience, training will be provided

Location: FC4 5000 Canoe Passway, Tsawwassen, BC V4M 0B3

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to keep records of the quantities of food used
• The candidates should be able to package take-out food
• The candidates should be able to portion and wrap foods
• The candidates should be able to prepare, heat, and finish simple food items
• The candidates should be able to serve customers at counters or buffet tables
• The candidates should be able to stock refrigerators and salad bars
• The candidates should be able to take customers’ orders

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Victoria or Swartz Bay or Richmond

The Opportunity

For 65 years, we have been dedicated to connecting British Columbia’s coastal communities and providing safe and efficient travel to our customers. As we continue to invest in our fleet and infrastructure, the Fleet Project Management Office (FPMO) plays a critical role in ensuring our vessels are safe, reliable, and continually improved to meet future needs. We are seeking a Project Coordinator to join our dynamic and collaborative team.

As a Project Coordinator, you lead low complexity vessel projects from start to finish—planning, execution, monitoring, and closure. These projects may include vessel refits, dry-dockings, capital upgrades, conversions, or repairs. You work under the guidance of a Senior Project Manager and support more complex vessel projects by assisting Project Managers ensuring the Project Team delivers the defined project scope and deliverables within budget, on schedule, at the required level of quality, and within the acceptable level of health, safety, security and environmental risk. Typical project assignments may include refit, dry-docking, capital modifications, conversions, emergent repairs or improvements to vessels.

This is a unique opportunity for someone who is early in their project management career and wants to grow within a structured, high-impact organization while being involved in meaningful, hands-on project work.

The role

Reporting to the Senior Project Manager, Fleet Project Management Office, you add value and are energized by key areas of oversight such as:

• Acting as a single point authority in relation to internal and external stakeholders, with respect to the projects assigned;
• Developing and executing project plans according to established FPMO methodology;
• Liaising and executing contract management processes related to assigned projects;
• Liaising and executing project change management and provide impact analysis to Project Owners;
• Ensuring proper closing of projects, including the capturing and dissemination of lessons learned;
• Assisting Project Owners and Project Managers in developing preliminary and detailed Business Cases;
• Providing project reports and updates to both internal and external stakeholders in the approved format and frequency;
• Creating and maintaining collaborative working relationships with all key project stakeholders, both internal and external;
• Administering and following applicable BCFS Fleet Regulations, Health, Safety, Security, Environmental policies and all applicable Regulatory and legal provisions;
• Ensuring value, engineering analysis, feasibility and safety/security/environmental studies are conducted when required;
• Working with the Project Team and Owners to develop project plans, including but not limited to: project requirement gathering, specifications, WBS, budget preparation, cash flow forecast, vessel and project schedule, risk plan, resource allocation plan, procurement plan, quality plan and communication plans;
• Organizing and chairing meetings with Project Owners, managers, designers, estimators, contractors, personnel, as well as administering facilities and assets;
• Travelling as required to ensure proper planning, control, management and execution of projects;

What you bring to the team

• Diploma or Degree in Marine Engineering, Naval Architecture or Mechanical Engineering from a recognized institute
• Training in Project Management Principles and Knowledge areas and working towards Project Management Professional (PMP) Certification considered an asset
• A Marine Engineering Certificate of Competency (Steam or Motor) desirable but not essential; continued proficiency endorsement may be considered
• 2+ years of experience supporting multi-faceted projects, preferably within a shipbuilding, ship repair or industrial marine operations environment

Join us!

If this sounds like your next great career move, please submit your cover letter and resume by February 13, 2026 at 11:59pm.

Additional information

The target salary range: $83,500 - $104,300 per annum.  The starting salary is determined based on the successful candidate’s knowledge, experience and internal equity.

We are seeking highly motivated, experienced and qualified Marine Engine Mechanics, preferably with marine engine and/or thruster experience to fill a position at our Fleet Maintenance facility in Richmond.

This position will support the refit and capital project requirements for our fleet of vessels and will be performing the following: services, repairs and refits of vessel engines, systems, and equipment including engine components, compressors, and pumps, relief and safety valves, cylinder heads, cooler cores, clutches and engine blocks; measures and inspects bearings, cylinders, pistons, and turbochargers; repairs and tests of fuel injection systems, including pumps and injectors; operates large and small mobile cranes, forklifts and winches.  Provides a ‘lead hand’ role for new employees and helpers; and performs additional duties as required.

You have a thorough understanding of Work Safe BC regulations and safe working practices and working knowledge of relevant materials, tools and equipment. You hold a relevant BC or Interprovincial Trade Qualification in one or more of the following trades: Heavy Duty Mechanic, or Millwright.  

Join us!

If this sounds like your next great career move, please apply online by January 28, 2026.

We are seeking highly motivated, experienced and qualified Marine Engine Mechanics, preferably with marine engine and/or thruster experience to fill a position at our Fleet Maintenance facility in Richmond.

This position will support the refit and capital project requirements for our fleet of vessels and will be performing the following: services, repairs and refits of vessel engines, systems, and equipment including engine components, compressors, and pumps, relief and safety valves, cylinder heads, cooler cores, clutches and engine blocks; measures and inspects bearings, cylinders, pistons, and turbochargers; repairs and tests of fuel injection systems, including pumps and injectors; operates large and small mobile cranes, forklifts and winches.  Provides a ‘lead hand’ role for new employees and helpers; and performs additional duties as required.

You have a thorough understanding of Work Safe BC regulations and safe working practices and working knowledge of relevant materials, tools and equipment. You hold a relevant BC or Interprovincial Trade Qualification in one or more of the following trades: Heavy Duty Mechanic, or Millwright.  

Join us!

If this sounds like your next great career move, please apply online by January 28, 2026.

Overview

• Facility and Work Location- Richmond, Richmond 
• Posting Locations - Richmond
• Department - West Fleet Team
• Job Function - Maintenance
• Employee Type -  Regular Employee FT  Hourly
• Wage/ Shift- 50.70

Overview

Overview