All jobs within 50 km around Cochrane

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate or equivalent experience
Experience: Candidates should have experience of 2 to less than 3 years
Security and safety: Criminal record check

Physical Requirements:

• The candidates should be comfortable working in noisy environments and able to work in dusty conditions
• The candidates should be able to work effectively in a fast-paced environment and capable of working under pressure
• The candidates should be able to handle physically demanding tasks and adept at meeting tight deadlines
• The candidates should be able to perform repetitive tasks efficiently and demonstrate hand-eye coordination
• The candidates should be able to handle weights up to 45 kg (100 lbs)

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to load, unload, and transport construction materials and perform pre-operational inspections
• The candidates should be able to clean and lubricate cranes and erect and dismantle concrete forms, scaffolding, ramps, catwalks, shoring, and barricades
• The candidates should be able to mix, pour, and spread materials such as concrete and asphalt and operate cranes equipped with dredging attachments to dredge waterways and other areas
• The candidates should be able to operate gantry cranes to load and unload ship cargo at portside and operate locomotive cranes to move objects and materials at railway yards
• The candidates should be able to assist in drilling and blasting rock on construction sites and assist in framing houses, erecting walls, and building roofs
• The candidates should be able to assist in demolishing buildings and perform routine maintenance work
• The candidates should be able to tend or feed machines or equipment used in construction and direct traffic at or near construction sites

Benefits:

• The candidates will get dental plan and health care plan

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume, Cover letter, references attesting experience, and letter of recommendation) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates don’t need experience, training will be provided

Physical Requirements:

• The candidates should be able to work in a fast-paced environment and handle physically demanding tasks comfortably
• The candidates should be comfortable with a combination of sitting, standing, and walking duties, and capable of handling weights up to 23 kg (50 lbs)

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to load, unload, and move products and materials by hand or with basic material handling equipment, as well as operate a variety of equipment to perform these tasks
• The candidates should be capable of shipping orders, picking orders and stocking, and providing customer service
• The candidates should possess the ability to weigh materials and goods, make labels and attach them to goods, wrap goods, and pack and unpack goods
• The candidates should also be proficient in sorting, crating, and stacking goods, installing, lashing, and securing goods, and storing cargo and materials

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

By mail
5- 4623 MANILLA RD SE
CALGARY, AB
T2G 4B6

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 1 to less than 2 years’
Credentials: Class 5/5F/G Licence (cars, small trucks and other 2-axle vehicles)

Physical Requirements:

• The candidates should be able to work with attention to detail
• The candidates should be able to work in tight deadlines

Candidate Status:

• Canadian citizen and permanent or temporary foreign workers of Canada are eligible for this position.
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to operate and drive automobiles, vans and light trucks to pick up and deliver various items and products
• The candidates should be able to professionalism in customer service, assemble, install and set-up merchandise/products
• The candidates should be able to load and unload goods
• The candidates should be able to use maps and other trip planning aids
• The candidates should be able to perform pre-trip, en route and post-trip inspection and oversee all aspects of vehicle

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume) through below mentioned details.

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates don’t need experience, training will be provided
Own tools/equipment: Steel-toed safety boots
Credentials: Driver’s License (Class 1 or A)

Physical Requirements:

• • The candidates should demonstrate attention to detail and be willing to work overtime as required

• The candidates should be capable of performing repetitive tasks

Other Requirements:

• The candidates should demonstrate flexibility

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to load and unload goods, oversee the condition of the vehicle and inspect tires, lights, brakes, cold storage, and other equipment, and perform brake adjustments
• The candidates should be able to perform emergency roadside repairs, pre-trip, en route, and post-trip inspections, and oversee all aspects of the vehicle
• The candidates should be able to perform preventive maintenance, receive and relay information to central dispatch, and record cargo information, hours of service, distance traveled, and fuel consumption

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 7 months to less than 1 year
Area of specialization: Contracts, Statistics, Financial statements, Invoices, and Charts, tables, graphs, and diagrams
Computer and technology knowledge: Google Docs and MS Office
Security and safety: Basic security clearance

Physical Requirements:

• The candidates should be able to work in a fast-paced environment and work under pressure
• The candidates should be capable of meeting tight deadlines and have attention to detail
• The candidates should be prepared for repetitive tasks

Other Requirements:

• The candidates should have the ability to multitask and possess excellent oral and written communication skills
• The candidates should exhibit flexibility and be organized, demonstrating client focus and reliability
• The candidates should be a team player and accurate in their work

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to arrange and coordinate seminars, conferences, etc., and supervise other workers.
• The candidates should be able to record and prepare minutes of meetings, seminars, and conferences, and determine and establish office procedures and routines
• The candidates should be able to schedule and confirm appointments, answer telephone and relay telephone calls and messages, and answer electronic enquiries
• The candidates should be able to compile data, statistics, and other information, and order office supplies and maintain inventory
• The candidates should be able to arrange travel, related itineraries, and make reservations, greet people and direct them to contacts or service areas, and set up and maintain manual and computerized information filing systems

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates don’t need standard educational qualifications
Experience: Candidates should have experience of 1 to less than 2 years

Location: 4393 14 street suite unit 2 Calgary, AB T2E 7A9
Shifts: Evening, To be determined, Early Morning
Work setting: Various locations

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume) through the below-mentioned details.

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates don’t need experience, training will be provided

Location: 5325 72 Ave SE, Calgary, AB, T2C 4X6
Shifts: Day, Evening and Morning

Responsibilities:

• The candidate should be able to clean and sanitize items such as dishwasher mats, carts and waste disposal units, operate dishwashers to wash dishes, glassware and flatware, clean and sanitize kitchen including work surfaces, cupboards, storage areas, appliances and equipment, remove kitchen garbage and trash and also wash, peel and cut vegetables and fruit
• The candidate should be able to replenish condiments and other supplies at tables and serving areas, scour pots and pans, take customers’ orders and also receive, unpack and store supplies in refrigerators, freezers, cupboards and other storage areas
• The candidate should be able to keep records of the quantities of food used, package take-out food, portion and wrap foods and also prepare, heat and finish simple food items

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates don’t need experience, training will be provided
Area of specialization: Driver logbook, and Inspection report (pre-trip, en-route, and post-trip)
Credentials: Driver’s License (Class 1 or A) 

Physical Requirements:

• The candidates should be capable of handling loads weighing up to 13.5 kg (30 lbs)

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to drive as part of a two-person team or convoy, load and unload goods, and perform brake adjustments
• The candidates should be able to perform emergency roadside repairs, pre-trip, en route, and post-trip inspections, oversee all aspects of the vehicle, and perform preventive maintenance
• The candidates should be able to receive and relay information to central dispatch, as well as record cargo information, hours of service, distance traveled, and fuel consumption

Benefits:

• The candidates will get learning/training paid by employer

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates don’t need experience, training will be provided 

Other Requirements:

• The candidates should be accurate, flexible, reliable, and a team player
• The candidates should be hardworking, reliable, and a team player

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to load, unload, and transport construction materials, erect and dismantle concrete forms, scaffolding, ramps, catwalks, shoring, and barricades, and operate pile driving cranes to drive pilings into earth to provide support for buildings and other structures
• The candidates should be able to mix, pour, and spread materials such as concrete and asphalt, assist in aligning pipes during pipeline construction, and assist in drilling and blasting rock on construction sites
• The candidates should be able to level earth to fine grade specifications, assist in demolishing buildings, and perform routine maintenance work

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Job Summary:

The Electrician/PLC Programmer is responsible for, Equipment and Plant electrical systems, programming, repairing, troubleshooting and maintaining programmable logic controller (PLC) systems used within the Pepsi bottling/processing facility. Inspects equipment for proper functioning and performs mechanical/electrical preventative maintenance duties per manufacturer's specifications. The successful candidate will also support day to day electrical and mechanical maintenance activities, including, preventative maintenance, repairs, changeovers and installations for other advanced production/manufacturing equipment. May mentor and provide support to less experienced technicians. Troubleshoot and diagnose equipment malfunctions and perform more complicated repairs or adjustments as needed. 

Compensation:

• $44/hour + Health and Dental Benefits and Pension

Shift Details:

• Flexible with shift timings (Morning, Afternoon or Night)
• Monday - Friday, occassional weekends (44 hours/week)

Must hold an electrical ticket with Red Seal. Please specify if you hold these certifications in your resume. All resumes that do not state the mentioned qualifications will not be contacted.

Responsibilities

• Perform electrical and mechanical preventative maintenance on all Equipment and Plant electrical systems and PLC systems
• Perform preventative maintenance on all PLC systems
• Program, troubleshoot and perform repairs on Equipment and Plant PLC systems
• Perform software updates when required
• Perform program changes when required and backup copies of all programs
• Perform preventative maintenance or repairs on more advanced, high speed packaging equipment and production equipment as needed
• Perform breakdown analysis
• Oversee or perform general housekeeping
• Upgrade production lines with new/upgraded equipment/technology
• Assist with line/equipment package changeovers
• Enforce GMP, safety, and audit standards
• Work independently under limited supervision (self-management)
• Documentation of work schedule, pm’s and work tasks completed
• Complete weekly mechanical/electrical pm’s
• Assist with mechanical repairs

Qualifications

• Certified Electrical ticket with Red Seal
• Certified PLC programmer preferred
• Pass technical assessment addressing job-critical maintenance knowledge areas
• Experience with basic electrical systems (e.g., starters, fuses, contacts, relays).
• Experience with electrical systems (installation, frequency drives, troubleshooting)
• Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.).
• Experience with PLC (e.g., industrial maintenance, computer control systems, etc.).
• Experience with product manuals (e.g., reading and applying knowledge to make repairs).
• Experience with schematics (e.g., electrical blueprints with switches, starters, maps, relays).
• Experience with troubleshooting (e.g., diagnostics, problem solving, etc.).

Helpful Experience:

• Experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings).
• Experience with compressors/ammonia systems (e.g., refrigeration systems).
• Experience with conveyors and airveyors (air cylinders, diverters, sensors, motor/speed controls).
• Experience with kinematics (e.g., line speed/sprocket size ratios, etc.). Review rating instructions.
• Experience with packaging/high speed production (e.g., bottling, consumer products, etc.).
• Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting).
• Experience with pneumatics/air compression (e.g., valves, cylinders, etc.).
• Experience with preventative maintenance (computerized preventative charts/data).

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate
Experience: Candidates should have experience of 3 to less than 5 years
Area of specialization: Structural construction and Cast iron and other metals
Equipment and machinery experience: Arc welding machine, Brazing machine, Butt or seam resistance welding machine, Gas welding machine, Soldering machine, Spot welding machine, and Electrical wiring devices
Credentials: Welder Trade Red Seal Certificate

Physical Requirements:

• The candidates should be able to work in noisy environments
• The candidates should be able to handle weights up to 13.5 kg (30 lbs)

Other Requirements:

• The candidates should be a team player

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to interpret welding process specifications and operate manual or semi-automatic, fully automated welding equipment
• The candidates should be able to read and interpret welding blueprints, drawings, specifications, manuals, and processes, and examine welds to ensure they meet standards
• The candidates should be able to operate manual or semi-automatic flame-cutting equipment and utilize computer-aided design (CAD) software
• The candidates should be able to operate brakes, shears, and other metal shaping, straightening, and bending machines, and fit, braze, and torch-straighten metal
• The candidates should be able to operate oxygen arc cutting equipment (arc-air) (AOC) and determine the weldability of materials
• The candidates should be able to operate hoisting and lifting equipment and previously set-up welding or brazing/soldering machines
• The candidates should be able to start up, shut down, adjust, and monitor robotic welding production lines

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

By mail
Unit: 1251, 3730-108 Avenue NE
Calgary, AB
T3N 1V9