All jobs within 50 km around Orangeville

The Janitor position is responsible for cleaning, painting and maintaining the interior and exterior of buildings, equipment,  facilities and their surrounding grounds. Additional responsibilities include waste removal and maintaining clean conditions to ensure safety and cleanliness. 

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Run floor scrubber.

· Empty garbage and recycling bins when required.

· Vacuum, sweep, and mop all required areas.

· Wash or scrub designated areas and equipment as required.

· Maintain outside company property when required.

· Work in conjunction with maintenance and production personnel as needed.

· Calculate cost of supplies by multiplying unit prices by quantities and totaling them.

Credentials

· High School Diploma or equivalent general election.

· Previous cleaning or janitorial experience considered an asset.

· Able to interact with employees to provide and receive job-related information, assess cleaning situations and discuss solutions.

· Ability to read and understand Workplace Hazardous Materials Information System (WHMIS) labels on products to understand applicable safety cautions.

Desired Characteristics

· Ability to handle complaints and respond to emergency situations.

· Ability to work independently, but coordinate work schedules with others.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

355 Massey Road, Guelph, Ontario, N1K 1B2, CA

The Engineer - Process position will be responsible for determining the operations for fabrication and assembly of products by reviewing parts drawings, specifications, and other engineering data. Primarily accountable for planning, scheduling, conducting, or coordinating phases of major engineering projects in addition to developing sequence of operations, estimate time requirements for each, and prepare operation sheets.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

 400 Massey Road, Guelph, Ontario, N1K 1C4, CA

• Work with production planning to set shop priorities and ensure all necessary tools and documentation needed in the plant are available.
• Attend Advance Quality Planning meetings to finalize design of required fixtures and tooling.
• Interface with suppliers of raw material and tools to establish engineering requirements for start of production.
• Investigate and find resolution of specific processing problems for assigned projects and parts.
• Prepare quotations for new jobs, including material and processing costs, tooling, gauges and capital investment costs if required.
• Participate in productivity improvement investigations.
• Conduct time studies.
• Maintain ongoing process control through quality troubleshooting and process improvement investigation.
• Regular review of all processes and operator instructions for assigned customers to ensure accuracy and conformance to actual procedures.
• Collect data and develop statistics to describe equipment and system functionality.
• Estimate durations of development, fabrication, construction and repair tasks.
• Define which materials and equipment to use for projects and select appropriate codes.
• Complete work order and change work order forms to notify key parties about projects.
• Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Credentials

• Post-Secondary education in Engineering or Equivalent.
• Minimum three years of related experience.
• Knowledge/work experience in machine processes, cutting tools, fixtures, CNC and Special purpose machines.
• Working knowledge of ISO-TS16949 and ISO 14001, and with mechanical blueprint interpretation including GD and T.
• Good computer skills, including Word, Excel and Outlook.
• Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining (i.e. AutoCAD, CAD/CAM and SolidWorks).

Desired Characteristics

• Able to interact with supervisors or managers and integrate work within teams of engineers and technicians to work on common projects.
• Attend formal professional development seminars and conferences as needed.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

The Materials Coordinator position, under general supervision, responsible for establishing the quantity and order date for materials needed to meet the master production schedule. In addition, initiate purchase or production requisitions as appropriate.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Coordination and release of vendor materials to meet daily production schedules.

· Directly influence weekly and long term production requirements for all lines, through the daily analysis of customer releases.

· Manage inventory stock levels by applying advanced inventory control techniques; monitoring and update minimum and maximum stock levels.

· Inventory management; maintain target inventory level for raw and finished good products, cycle counting and physical inventory.

· Develop and maintain weekly and daily shipping schedules for all customers and vendors.

· Utilize customer software systems to communicate their daily standards.

· Dispute any infractions to our Customer rating when applicable.

· Maintain close support with all Subcontracting suppliers to ensure all schedules are being met.

· Expediting of all customer and vendor requirements when necessary.

· Coordination of transportation and vendor releases to assure the timely delivery of materials and to minimize freight costs.

· Generation of Customer and Vendor Delivery performance metrics.

· Perform monthly Physical inventory, when necessary by Materials Manager.

· Maintaining computerized inventory control system in conjunction with manual systems.

· Provide information to customs department for clearing incoming/outbound shipments, i.e. purchased items, raw material, machines, etc.

· Receive assignments from supervisors at beginning of each shift and plan how best to sequence tasks to meet deadlines.

· Complete forms, such as weekly inventory sheets.

· Communicate with suppliers to confirm details, such as purchase order numbers.

· Calculate invoices and accept cash, cheque or credit card payments from customers.

Credentials

· Post-Secondary education in Materials Management or related experience.

· Minimum two years production planning experience in a manufacturing environment.

· MRP and Web-based Customer System (Ford DDL, GM SupplyPower, DCX S.M.A.R.T.) considered an asset.

· Knowledge of QS9000, TS16949 and ISO14001.

· Ability to read forms, such as invoices, parts order forms, packing slips and bills of lading.

· Use computer-operated machinery such as print delivery slips using computerized printers.

Desired Characteristics

· Ability to work with a partner and independently as needed.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

Performance Expectations

Plan and direct highway and/or local drivers on daily freight pick-up and deliveries

Pre-plan driver’s trip itineraries and communicate those with all drivers

Track equipment, freight, and drivers through use of satellite and/or two-way radio

Communicate and direct customer service on issues and information that need to be communicated to customers, such as freight delivery delays and billing issues

Collect, sort, and distribute all driver trip envelopes

Ensure that all driver trip envelops are complete and accurate

Ensure that all customer needs and freight requirements are met through instructions and trip planning of the drivers

Prioritize loads and customers to accommodate changes and problems as they arise

 

Credentials

Completion of Secondary school diploma

Ability to interpret and give both verbal and written instructions

Excellent verbal and written communication skills

Prioritization skills and be multi-task oriented

Ability to develop and maintain co-operative working relationships with co-workers and customer

Ability to accomplish task in a controlled, effective manner while working under stress

Keen attention to detail

Leads and directs the work of others

What Linamar Has To Offer

Opportunities for career advancement.

Community based outreach supporting both local and global initiatives and charities.

Social committees and sports teams.

Discounts for local vendors and events, including auto supplier discounts.

As Assembly Manufacturing Engineer at PowerCor Manufacturing, you will play a key role in optimizing our manufacturing processes to enhance safety, quality and efficiency.  You will work closely with cross-functional teams to identify areas for improvement, develops innovative solutions, and implement process enhancements that drive operational excellence. 

Responsibilities

• Work directly on the shop floor to troubleshoot issues, implement changes and execute process improvements
• Address and resolve manufacturing issues in real-time, including equipment malfunctions, process deviations, and quality concerns
• Implement process improvements to enhance productivity, reduce waste/rejects, and minimize downtime/cycle time
• Utilize data analysis techniques to identify trends, troubleshoot issues and make data driven decisions to optimize manufacturing processes
• Lead root cause analysis investigations to address process deviations, quality issues and equipment failures
• Create and maintain detailed process documentation, including Standard Operating Procedures (SOPs), work instructions, and process flow diagrams
• Provide technical support and training to production personnel to ensure proper execution of manufacturing processes
• Knowledge of Pneumatics/Hydraulics, Assembly Concepts/Tooling/Fixturing 
• Work closely with cross-functional teams, including production, maintenance, and quality assurance, to ensure seamless integration of process improvements

Qualifications

• A post-secondary Engineering degree, diploma or equivalent
• 1-3 years of hands-on experience in a manufacturing engineering role
• Strong understanding of manufacturing processes, equipment, and tools
• Excellent troubleshooting skills with a proactive approach to addressing and resolving manufacturing challenges
• Strong communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams.
• Machine design mentality, SolidWorks proficiency and GD&T knowledge are assets.
• Ability to work effectively in a fast-paced environment and adapt to changing priorities and challenges

What Linamar Has to Offer

• Opportunities for career advancement
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts.

The Technical Accounting and Research Specialist, Intermediate is responsible for supporting Linamar’s finance and accounting groups in the interpretation and application of IFRS including assisting on projects related to technical accounting issues.  In addition, this individual will assist in ensuring accuracy and completeness of information required for Linamar’s quarterly and annual financial statements and MD&A, as well as compliance with local statutory financial statements and internal control over financial reporting.

 Performance Expectations

• Evaluate the impact of changes in IFRS and the impact on the Company
• Draft for review position papers around technical accounting topics
• Monitor and update corporate accounting policies 
• When requested assist with administrative support and performing reviews of the Company’s international statutory financial statements
• Perform research of technical accounting issues, including working with external advisors when necessary
• Evaluate financial reporting impact of changes to the Company’s operations
• Provide technical support to the Company’s business units in their assessment of accounting issues
• Work with finance staff on projects related to the continuous improvement of information related to financial reporting 
• Assist with external reporting to ensure disclosures are complete and accurate 
• Assist with special projects related to implementation of new or changing accounting standards
• In addition to providing administrative support for the external audit, liaise between the business units and the auditors, facilitating the preparation, planning, and coordination of interim and year-end audits
•  Various special projects and ad hoc requests as assigned

Credentials

• A university degree in Accounting, Business or a related discipline is required
• Must have a professional accounting designation (preferably CPA) with a minimum of 2+ post-designation years of related experience
• Thorough working knowledge of IFRS
• Experience in project management including the ability to work with other accounting and non-accounting groups in a global organization
• Experience in researching and developing technical accounting procedures and positions in response to complex accounting issues, with the ability to draft position papers, suggest policy actions and otherwise provide formal written guidance to management and other finance professionals regarding those issues
• Experience preparing financial statements and related notes in a public company environment

Desired Characteristics

• Excellent demonstrated verbal and written communication skills
• Demonstrated ability to work with other accounting and non-accounting groups in a global organization

What Linamar Has To Offer

• Opportunities for career advancement
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

Engineer – Manufacturing, Junior - 6 month contract

The Engineer – Manufacturing, Junior position will be responsible for working with production planning

to set shop priorities and ensure all tools and documentation necessary in the plant for production run

jobs are available.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Investigate and monitor new machinery and equipment and recommend or select efficient combinations.

· Conduct time studies to optimize cycle counts of existing processes.

· Assist in defining the plant layout and enhance ergonomic standards by establishing programs and conducting studies.

· Planning and executing of projects related to new and pre-existing production lines, improvements, upgrades, layouts, and new equipment related to machining or assembly.

· Attend Advanced Product Quality Planning (APQP).

· Recognize and resolve tooling related difficulties.

· Interface with suppliers of raw materials and tools.

· Investigate and find resolution of specific processing problems for assigned projects/parts.

· Conduct studies of the reliability and performance of plant facilities and productions or administrative systems.

· Develop and review all processes and operator instructions to endure accuracy and conformance to actual procedures; revise as needed.

· Participate in corrective action to meet ongoing cost, quality, and delivery.

· Direct development of process flows, process sheets, FMEA’s, and control plans.

· Ensure the process is capable of producing parts in print specifications.

· Recognize and resolve process related difficulties with current and future projects.

· Assist in the preparations of quotations

· Participate in Customer Focus Meetings

· Assist in training shop floor personnel in machine set-up, equipment operations, and best practices.

· Adhere to TS16949 and applicable customer standards.

· Ability to discuss daily production with plant operators and maintenance staff.

· Ability to evaluate the ability of current building systems to address increased demands from plant operations.

· Estimate durations of development, fabrication, construction, and repair tasks.

· Ability to select materials and equipment to use for projects and decide appropriate codes.

Credentials

· Post-Secondary Education in Engineering or related discipline.

· Licensing by a provincial or territorial association of Professional Engineers (P.Eng.) considered an asset.

· Minimum of one years of experience in a machining or manufacturing environment.

· Proficient with Microsoft Office and CAD applications.

· Ability to write comprehensive entries into technical log books.

· Experience with risk analysis and failure modes and effects analysis (FMEA).

· Ability to review scale drawings.

· Ability to take precise measurements using specialized equipment and techniques.

· Ability to coordinate and integrate work within teams of engineers and technicians to work on common projects.

Desired Characteristics

· Ability to work in a team setting environment for tasks such as creating scale drawings, preparing specifications, writing proposals and developing plant maintenance schedules.

· Possess excellent diagnostic skills.

· Excellent interpersonal skills in order to effectively communicate with suppliers, supervisors and managers.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

Performance Expectations

Plan and direct highway and/or local drivers on daily freight pick-up and deliveries

Pre-plan driver’s trip itineraries and communicate those with all drivers

Track equipment, freight, and drivers through use of satellite and/or two-way radio

Communicate and direct customer service on issues and information that need to be communicated to customers, such as freight delivery delays and billing issues

Collect, sort, and distribute all driver trip envelopes

Ensure that all driver trip envelops are complete and accurate

Ensure that all customer needs and freight requirements are met through instructions and trip planning of the drivers

Prioritize loads and customers to accommodate changes and problems as they arise

 

Credentials

Completion of Secondary school diploma

Ability to interpret and give both verbal and written instructions

Excellent verbal and written communication skills

Prioritization skills and be multi-task oriented

Ability to develop and maintain co-operative working relationships with co-workers and customer

Ability to accomplish task in a controlled, effective manner while working under stress

Keen attention to detail

Leads and directs the work of others

What Linamar Has To Offer

Opportunities for career advancement.

Community based outreach supporting both local and global initiatives and charities.

Social committees and sports teams.

Discounts for local vendors and events, including auto supplier discounts.

Job Summary

This position is a temporary and seasonal part-time role requiring use of one's personal vehicle to deliver packages primarily in residential areas. They will perform in a physical, fast-paced, outdoor position involving continual lifting, lowering, and carrying packages.

Responsibilities:

• Retrieves, loads packages into personal vehicle, and delivers packages to customers.

Job Type: Part-Time - Permanent

Work Location: 550 Hanlon Creek Blvd,Guelph ON N1C 0A1

Workdays: Monday - Friday

Shift Duration:4-5 hours per day *(Flexibility is required with both the start and finish times)

• Shift Schedule Start Time: 10 AM

Pay rate: $17.30/hr.

Mileage : 0.70 cents per km.

** APPLICANTS MUST BE ABLE TO WORK UP TO 25 HOURS PER WEEK**

Qualifications:

• Meets local age and operations requirements to operate a vehicle.
• Ability to lift up to 70 lbs./32 kgs.
• Excellent customer contact and service skills
• Must be willing to use personal vehicle to transport and deliver packages.
• Able to lift up to 70lbs
• Comfortable working in a fast-paced customer facing and outside environment
• Must have a valid Ontario G driver’s license
• Vehicle registered in candidate's name
• Valid vehicle insurance

UPS Canada is a diverse and equal opportunity employer. Please advise our HR representatives if workplace accommodation is needed. Thank you for your interest in UPS Canada.

The Accounting Clerk is responsible for reporting to the facility Accounting Manager providing efficient clerical support while preparing invoices and statements, reconciling accounts and posting to general ledgers and other accounting records based on standard accounting practices.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

• Enter A/R Payments and review outstanding invoices.
• Follow up with customer for past due accounts.
• Enter customer PO’s into the system.
• Prepare monthly adjustments, reversing journal entries and accruals.
• Assist with monthly account reconciliations, and intercompany reconciliation.
• Ensure payment for capital assets and maintain current subledger for all fixed assets.
• Various month end duties completed by assigned deadline.
• Review accounting discrepancies with appropriate department.
• Generates reports.
• Petty cash management.
• May be required for payroll or reception backup.
• Maintain accuracy in financial records while paying attention to detail.
• Ability to solve discrepancies in accounting data.
• Interpret accounts and financial statements for accountants and management.

Credentials

• High School Diploma or an equivalent general education and work experience.
• Previous related background experience.
• Working knowledge of computer programs such as word processing, database, spreadsheet and financial software.
• Demonstrate working knowledge IFS, SAP BPC

 
Desired Characteristics

• Interact with others demonstrating good communication skills – both verbal and written.
• Possess organization skills dealing with a variety of tasks.
• Ability to work in a team setting assisting others to complete routine tasks efficiently.
• Ability to learn additional functionality in the ERP system, work procedures, and expand financial knowledge in areas.

 
What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports trams.
• Discounts for local vendors and events, including auto supplier discounts.

Owner Operator Truck Driver – Long Distance

QUALIFICATIONS:
• Must have a minimum of two year verifiable experience with articulated equipment
• Equipment must not be more than 4 years old.
• Must be legally entitled to work in Canada and to enter the United States
• Must possess a valid class AZ driver’s license that has not been suspended or revoked in the past 36 months
• Can read and speak the English language sufficiently to converse with the general public, to understand the highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records.
• Must be admissible into the US (Able to obtain a FAST card)
• Must meet USDOT medical requirements
• Must provide a recent criminal record search or a valid FAST card
• Must provide an original driver’s abstract no older than 3 months, no more than 3 demerit points
• Must provide an original CVOR abstract no older than 3 months
• Must submit a negative drug screen
• Must be capable of meeting the physical demands of the job
• Must satisfactorily complete a road test by a LTI appointed evaluator
• Must not have any preventable accidents within the last three years where the claim exceeds $3000

RESPONSIBILITIES:
• Operate and drive articulated or straight trucks, weighing over 4600 kg with three or more axles to transport goods and material to destinations
• Oversee all aspects of vehicles, such as condition of equipment, loading and unloading, and safety and security of cargo
• Perform pre-trip inspection of vehicle systems and equipment such as tires, lights, and brakes.
• Record cargo information, distance traveled, fuel consumption, and other information in log book and/or on board computer
• Communicate with dispatcher and other drivers using on-board computer, cell phone, and CB radio

700 Woodlawn Road West, Guelph, Ontario, N1K 1G4, CA